Archives: Products
Showing 7905–7920 of 23773 results
-
3-22mm (1/8″-7/8″) TUBE CUTTER FOR STAINLESS STEELRead moreKennedy Mini Pipe Cutter
Compact and robust construction ideal for use in confined spaces. Grooved rollers allow close-to-flare cuts. Large feed screw for accurate cutting of aluminium, brass, copper and steel tubing.
Length: 66mm. -
3-28mm MIDGET TUBING CUTTERRead moreKennedy Midget Pipe Cutter
For use on copper, brass, aluminium and thin wall conduit. Supplied with spare blade.
Width: 25mm.
Overall length: 95mm. -
3-30mmx150mm TUBE CUTTERRead moreKennedy Pipe Cutters
With high strength cast bodies and single cutting wheels with two rollers. Suitable for stainless steel, brass and copper tubes. All fitted with deburring blades.
-
3-32mm (1/8″-1.1/4″) TUBE CUTTER FOR ST/STEELRead moreKennedy Pipe Cutters
With high strength cast bodies and single cutting wheels with two rollers. Suitable for stainless steel, brass and copper tubes. All fitted with deburring blades.
-
3-4″ EXTERNAL MICROMETERRead moreOxford Enamelled Frame External Micrometers – Inch
With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25 – 50mm/1 – 2â and over supplied with setting standard. Manufactured to BS 870. All supplied in a impact resistant fitted plastic case.
-
3-BA SOCKET 1/4″ SQ DRRead moreKennedy Bi-Hexagon Sockets, 1/4″ – AF
Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
3-DRAWER ROLLER CABINET – REDRead moreYamoto Roller Tool Cabinets
Double wall side panels and welded joints for added rigidity. Solid one piece I-beam drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 100mm rubber castors, two brakes. Overall dimensions: 850 x 690 x 460mm. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded, and should only ever be pushed.
3 Drawer
Bottom compartment (W x D x H): 610 x 430 x 355mm.
Drawer sizes (W x D x H): 3@ 590 x 410 x 100mm. Uses 16â drawer slides.5 Drawer
Internal drawer dimensions (W x D x H): 4@ 590 x 410 x 100mm.
1@ 590 x 410 x 200mm. Uses 16â drawer slides.7 Drawer
Internal drawer dimensions (W x D x H): 4@ 590 x 410 x 50mm. 2@ 590 x 410 x 100mm. 1@ 590 x 410 x 200mm. Uses 16â drawer slides. -
3-DRAWER TOOL CABINETRead moreSenator Roller Cabinets – 3 Drawer
3 Drawer
Double thickness side walls with welded joints and a hard wearing epoxy powder coating. I-Beam draw slides with double sliders on base drawer. 100mm rubber castors with brakes fitted to two end castors. Fully locking. Castors are rated to 40kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded and should only ever be pushed.
Overall dimensions (W x D x H): 680 x 435 x 660mm.
Drawer sizes (W x D x H): 3@ 511 x 403 x 75mm.
Bottom compartment (W x D x H): 678 x 425 x 368mm.
Uses 16″ drawer slides. -
3-DRAWER TOOL CHESTRead moreKennedy Portable Tool Chest
Manufactured from heavy gauge steel with all welded construction. Durable and corrosion-resistant two part epoxy powder paint finish. With quick release lid clasps, padlock hasps and textured carry handles. Full width piano hinges provide rigidity and strength, ensuring smooth operation and additional security. Three full-length drawers with rigid aluminium edged handles. Fully lockable unit with a handle on the top and a carry handle on each end. The lid automatically locks all of the closed drawers when lowered to prevent opening.
Overall dimensions (W x H x D): 520 x 340 x 215mm.
Drawer sizes: 2@ 460 x 180 x 55mm. 1@ 460 x 180 x 75mm. -
3-DRAWER TOOL CHESTRead moreSenator Tool Chests – 3 Drawer
3 Drawer
For the cost conscious, DIY and light industrial use. Piano hinged lid. Carry handle. Cantilever top tray. Fully locking.
Drawer sizes (W x D x H): 3@ 450 x 190 x 55mm.
Uses 10â drawer slides. Type A lid stays. -
3-DRAWER TOOL CHEST – REDRead moreYamoto Tool Chests – 3 Drawer
3 Drawer
Supplied with tote tray.
Drawer sizes (W x D x H): 1@ 590 x 285 x 50mm. 2@ 590 x 285 x 100mm.
Top compartment size (W x D x H): 660 x 150 x 90mm. Uses 10â Drawer slides.
Type A lid stays. -
3-IN-1 MULTIMETER & NETWORK MAINTENANCE TESTERRead moreEdison Auto Range Digital Multimeters – MNT070
Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters. Ideal for electrical troubleshooting and straightforward environmental testing in residential and commercial environments.
MNT070
The 3 in 1 digital multimeter is capable of testing the following: network cable testing, line testing (RJ11), DMM testing.
AC/DC voltage: 1000V.
AC/DC current: 10A.
Resistance: 200MW.
Relative measurement function. Diode testing facility. Clear display with LED back light and data hold function. Pack includes: network digital multimeter, test probes, TJ45 jack (remote), 9V battery (installed), instruction manual.
Dimensions (W x D x H): 165 x 65 x 230mm. -
3-LEG FILTER WRENCH 3/8″SQUARE DRIVERead moreKennedy Three Jaw Oil Filter Wrench
For use with ratchet handles, extension bars, flexible drives etc. With 3/8â square drive and hexagon adaptor, or use with 19mm/3/4â AF spanners or sockets. All steel construction, chrome plated with milled teeth on gripping arms for positive action when loosening or tightening.
-
3-LEVER DEADLOCK 2.5″ PBRead more3 Lever Deadlock – Satin Plate Chrome Finish
711
64mm (2 1/2″) case size. Supplied with square or radius forend and strike. Supplied with two keys. Satin chrome plate finish. -
3-LEVER DEADLOCK 2.5″ SCPRead more3 Lever Deadlock – Satin Plate Chrome Finish
711
64mm (2 1/2″) case size. Supplied with square or radius forend and strike. Supplied with two keys. Satin chrome plate finish. -
3-LEVER DEADLOCK 3.0″ PBRead more3 Lever Deadlock – Satin Plate Chrome Finish
711
64mm (2 1/2″) case size. Supplied with square or radius forend and strike. Supplied with two keys. Satin chrome plate finish.