Category
- Abrasives
- Adhesives & Sealants
- Automotive
- Bearings & Transmissions
- Cabinets & Racking
- Calipers & Gauges
- Catering Equipment & Supplies
- Cleaning & Hygiene
- Collets & Toolposts
- Computers & Accessories
- Counterboring & Spot Facing
- Cutting Tools
- Bandsaws & Hacksaws
- Countersinking
- Deburring
- Hole Making
- Milling
- Ball Nose
- Carbide B/N End Mills – Long Series
- Carbide B/N End Mills – Regular Series
- Carbide B/N End Mills – Short Series
- Carbide B/N Slot Drills – Long Series
- Carbide B/N Slot Drills – Regular Series
- HSS B/N Slot Drills – Long Series
- HSS B/N Slot Drills – Short Series
- HSS-Co. B/N Slot Drills – Long Series
- HSS-Co. B/N Slot Drills – Short Series
- Bore Milling
- End Mills
- Carbide Double Ended End Mills – Regular Series
- Carbide End Mills – Long Series
- Carbide End Mills – Regular Series
- Carbide End Mills – Short Series
- HSS End Mills – Long Series
- HSS End Mills – Short Series
- HSS-Co. End Mills – Long Series
- HSS-Co. End Mills – Regular Series
- HSS-E PM End Mills – Regular Series
- Indexable Bodies
- Key & Slot Cutters
- Milling Inserts
- Roughing/Ripper Cutters
- Slot Drills
- Carbide Slot Drills – Double Ended
- Carbide Slot Drills – Long Series
- Carbide Slot Drills – Regular Series
- Carbide Slot Drills – Short Series
- HSS Slot Drills – Long Series
- HSS Slot Drills – Short Series
- HSS-Co. Slot Drills – Long Series
- HSS-Co. Slot Drills – Regular Series
- HSS-Co. Slot Drills – Short Series
- Slot Drill Cutter Sets
- Special Geometry Cutters
- Throwaway Cutters
- Ball Nose
- Part off & Grooving
- Reamers
- Reference/Data Books
- Threading
- Die nuts
- Dies
- Indexable
- Tapping Hand
- BA ISO529 HSS-GT Taps
- BSF ISO529 HSS-GT Taps
- BSPF ISO529 HSS-GT Taps
- BSPT ISO529 HSS-GT Taps
- BSW ISO529 HSS-GT Taps
- Combination Drill/Taps
- Left Hand ISO529 HSS-GT Taps
- Metric Coarse ISO529 HSS-GT Taps
- Metric Fine ISO529 HSS-GT Taps
- Metric ISO529 HSS-GT Threading Sets
- NPSF ISO529 HSS-GT Taps
- NPT ISO529 HSS-GT Taps
- NPTF ISO529 HSS-GT Taps
- Tap Wrenches
- UNC ISO529 HSS-GT Taps
- UNF ISO529 HSS-GT Taps
- Tapping Production
- Thread Chasers
- Turning
- Display Material
- Fasteners
- Fluid & Water Control
- Fluid Power
- Furniture
- Hand Tools
- Building & Construction
- Carpenters & Joiners
- Auger; Forstner & Flat Bits
- Bradawls; Gimlets & Tacklifters
- Chalk Lines
- Hand Drills & Braces
- Hole Cutters
- Marking & Cutting Gauges
- Mitre Blocks & Bench Hooks
- Pincers
- Planes
- Saws – Coping; Fret & Flexisaws
- Saws – Gents; Dovetail & Tenon
- Saws – Hand & Mitre
- Squares; Rules & Bevels
- Surface Forming Tools
- Wood Chisels
- Wood Turning & Carving Tools
- Clamps
- Cutting & Sawing
- Cycle Tools
- Decorators
- Electrical
- Engineers Tools
- Gardeners & Contractors
- Keys & Drivers
- Measuring
- Non Sparking Tools
- Pliers & Grips
- Plumbing & Pipe Tools
- Riveters
- Screwdriver Bits
- Screwdrivers
- Screwdrivers – Cabinet Handle
- Screwdrivers – Electronics & Mini
- Screwdrivers – Fluted Handle
- Screwdrivers – Hi-Grip/Mechanics Style Handle
- Screwdrivers – Insulated Handle
- Screwdrivers – Offset/Double Ended
- Screwdrivers – Precision/Jewellers
- Screwdrivers – Protorq/Magnum Style Handle
- Screwdrivers – Spiral Ratchet/Yankee
- Sheet Metal Working
- Sockets (Hand)
- Sockets (Impact)
- Spanners & Wrenches
- Stencils & Engraving
- Striking Tools
- Tool Kits & Multi Tools
- Torque Tools
- Vices
- Lubricants & Chemicals
- Anti Seize Lubricants
- Chain; Drive & Rope Lubricants
- Corrosion Preventatives & Welders Anti-Spatter
- Food Industry Lubricants & Greases
- Greases
- Grinding Fluids
- Hot Dip Coatings
- Industrial Cleaners & Solvents
- Leak Detectors; Flawfinders & Freezer Sprays
- Lubricating and Penetrating Oils
- Marker Paints & Pens
- Metal Cutting Coolants
- Mould Release Agents
- Paints & Primers
- Tapping & Drilling Lubricants
- Water Displacing & Maintenance Oils
- Materials & Maintenance
- Measuring & Test Equipment
- Co-Ordinate Measuring Machines
- Electrical Measuring & Testing Equipment
- Environment Gauges
- Inspection Workholding
- Mechanical Gauges
- Non-Mechanical Gauges
- Optical Equipment
- SPC & Digital Readout Equipment
- Spring Calipers & Spring Dividers
- Surface/Hardness Testers
- Test Gauges & Accessories
- Weigh Scales
- Office Supplies & Stationery
- Packaging
- Pads & Accounts
- Personal Protection
- Clothing & Workwear
- Eye Protection
- Footwear
- Hand Protection
- Gloves – Cold Resistant
- Gloves – Cotton
- Gloves – Cowhide
- Gloves – Disposable
- Gloves – Extra Grip
- Gloves – Goatskin
- Gloves – Latex
- Gloves – Leather
- Gloves – Mixed Fibre
- Gloves – Nitrile
- Gloves – Polkadot
- Gloves – Polyurethane
- Gloves – PVC
- Gloves – Rigger
- Gloves – Stockinette
- Gloves – Terry Towelling
- Gloves – Vinyl
- Gloves – Welders Gauntlets
- Head & Face Protection
- Hearing Protection
- Knee & Elbow Pads
- Personal Protection Kits
- Respiratory Protection
- Piston & Valve Tools
- Power Tools
- Site Safety
- Spindle Nose & Workholding
- Steps & Access Equipment
- Storage & Handling
Archives: Products
Showing 7873–7888 of 23773 results
-
2Mx60mm SWL 1000KG SIMPLEX FLAT SLINGRead more
Flat Webbing Slings
High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate ‘SWL’ (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant ‘SWL’.
Flat Slings with reinforced eye at each end.
Made to BS EN 1492:1 – 2000. -
2Mx60mm SWL 2000KG DUPLEX FLAT SLINGRead more
Flat Webbing Slings
High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate ‘SWL’ (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant ‘SWL’.
Flat Slings with reinforced eye at each end.
Made to BS EN 1492:1 – 2000. -
2Mx60mm SWL 3000KG ENDLESS ROUND SLINGRead more
Endless Round Webbing Slings
High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate ‘SWL’ (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant ‘SWL’.
Endless Round Slings
Made toBS EN 1492:2 – 2000 -
2Mx70mm SWL 4000KG ENDLESS ROUND SLINGRead more
Endless Round Webbing Slings
High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate ‘SWL’ (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant ‘SWL’.
Endless Round Slings
Made toBS EN 1492:2 – 2000 -
2Mx80mm SWL 5000KG ENDLESS ROUND SLINGRead more
Endless Round Webbing Slings
High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate ‘SWL’ (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant ‘SWL’.
Endless Round Slings
Made toBS EN 1492:2 – 2000 -
2Mx90mm SWL 3000KG DUPLEX FLAT SLINGRead more
Flat Webbing Slings
High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate ‘SWL’ (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant ‘SWL’.
Flat Slings with reinforced eye at each end.
Made to BS EN 1492:1 – 2000. -
2X HAND MAGNIFIER 100mm DIAMETERRead more
Kennedy Hand Magnifiers
Plastic lightweight magnifiers. Used to provide a clear crisp enlarged image. Used for
inspection of finished parts, enlarging small text andâpictures etc. -
2X ZINC PLATED HOSE CLIPSRead more
Zinc-Plated Hose Clips
Non-slip worm drive. Precision manufactured from the finest British steels to BS 5315. Passivated zinc finish to give double protection. For automotive, gas, plumbing and agricultural applications.
-
2x10mm METRIC PLAIN DOWEL PINRead more
Quality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
2x3BA DOUBLE ENDED BOX SPANNERRead more
Kennedy Box Spanners – BA
BA
Manufactured from high quality steel tube. Zinc plated for corrosion resistance, each supplied with tommy bar. -
2x6mm METRIC PLAIN DOWELPINRead more
Quality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
2x8mm METRIC PLAIN DOWELPINRead more
Quality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
3 GALLON PLASTIC BUILDERS BUCKETRead more
Plastic Bucket
Durable plastic rigid bucket with galvanised steel handle rotating plastic grip. Wide pouring lip and rounded reinforced edge. 3 gallon (14ltr) capacity. Easy to clean smooth interiors and exteriors.
-
3 GALLON RUBATYPE BUCKETRead more
Kennedy Plastic Bucket
Durable plastic rigid bucket with galvanised steel handle rotating plastic grip. Wide pouring lip and rounded reinforced edge. 3 gallon (14ltr) capacity. Easy to clean smooth interiors and exteriors.
-
3 LED ALU SOFT GRIP TORCH REQUIRES (2xAA) BATTSAdd to cart
Edison 3 LED Aluminium Soft Grip Torch
Water and impact resistant anodized aluminium case with rubber grip. Ultra bright long life LEDs with optical lens to produce a clear white light. Positive push button operation. All joints sealed with “O” rings.
-
3 LED ALU SOFT GRIP TORCH REQUIRES (3xAAA) BATTSAdd to cart
Edison 3 LED Aluminium Soft Grip Torch
Water and impact resistant anodized aluminium case with rubber grip. Ultra bright long life LEDs with optical lens to produce a clear white light. Positive push button operation. All joints sealed with “O” rings.