Relaunch Promotion
Product Showcase
Category: Panel Beating Dollies; Hammers & Sets
Panel Beating Dollies; Hammers & Sets
Showing all 16 results
-
120mm GRID PANEL BEATING DOLLYRead moreKenendy Panel Beating Dolly – Grid Dolly
Grid Dolly
Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For shrinking work. With a large crowned grid face on the surface and a plain flat face on the base this dolly, combined with a shrinking hammer and the use of heat, provides quick and effective shrinking. -
120mm LOW CROWN TOE PANEL BEATING DOLLYRead moreKenendy Panel Beating Dolly – Toe Dolly (Low Crown Dolly)
Toe Dolly (Low Crown Dolly)
Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For reshaping. Can be used in the hand to deliver a series of blows to the underside of the panel. Long crown enables use in hard to reach areas. -
132mm CURVED PANEL BEATING DOLLYRead moreKenendy Panel Beating Dolly – Curved Dolly
Curved Dolly
Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For raising low spots on panels. The edge can also be used to restore the shape of a roof and reform beads. -
64mm ULTILITY PANEL BEATING DOLLYRead moreKenendy Panel Beating Dolly – Utility Dolly
Utility Dolly
Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. Double-sided multi-purpose. Use the edge most suited to the size and shape of a damaged flange. -
758mm DOUBLE ENDED HAND PANEL BEATING DOLLYRead moreKenendy Panel Beating Dolly – Double-End Hand Dolly
Double-End Hand Dolly
Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For reshaping crowned panels and general panel beating. -
81mm HEEL PANEL BEATING DOLLYRead moreKenendy Panel Beating Dolly – Heel Dolly
Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For general reshaping of contoured panels, raising low spots and general panel beating.
-
PANEL BEATING SET 7-PIECERead moreKennedy 7-Piece Panel Beating Set
Supplied in a high quality fitted blow moulded impact resistant case. Drop forged, high carbon steel hammers with ground heads and cheeks. Hickory, octagonal section shafts. 1x: curved, utility, heel and toe dolly. 1x: 12oz shrinking hammer and flat faced bumping hammer, 1x 10oz round finishing pick.
-
PLANISHING HAMMER CROWNED FACERead moreBumping Hammers
Highly polished striking heads and cheeks. One square and one round face. The most popular general purpose panel beating hammer. Hickory shaft. Manufactured to BS 4114.
Crown Faced
As above but with crowned face. Length: 325mm. -
PLANISHING HAMMER CURVED PEIN FINISHING PICKRead moreFinishing Picks
Highly polished striking heads and cheeks. With crowned faces. Will remove low spots when metal finishing. Hardwood shaft and finishing beater. Manufactured to BS 4114.
Curved Pein Panel Beater
Medium weight for general use where access is difficult. Length: 325mm. -
PLANISHING HAMMER FLAT FACERead moreBumping Hammers
Highly polished striking heads and cheeks. One square and one round face. The most popular general purpose panel beating hammer. Hickory shaft.
Manufactured to BS 4114.Flat Faced
For straightening thicker gauge metals where a reasonable striking force is needed.
Length: 325mm. -
PLANISHING HAMMER HEAVY SHRINKINGRead moreShrinking Hammers
Highly polished striking heads and cheeks. One flat round face and one milled, serrated square face. Hickory shaft. Manufactured to BS 4114. Specially designed for panel beating on slightly stretched areas of metal. The cross milled face forces small amounts of metal into the spaces created.
Sizes: 325mm (except -7300K = 345mm). -
PLANISHING HAMMER LIGHT SHRINKINGRead moreShrinking Hammers
Highly polished striking heads and cheeks. One flat round face and one milled, serrated square face. Hickory shaft. Manufactured to BS 4114. Specially designed for panel beating on slightly stretched areas of metal. The cross milled face forces small amounts of metal into the spaces created.
Sizes: 325mm (except -7300K = 345mm). -
PLANISHING HAMMER REVERSE CURVERead moreReverse Curve Finishing Hammer
Highly polished striking heads and cheeks. The high crowned radius faces have a convex surface suitable for work on concave and recessed panels. The short head is ideal for use in confined areas. Hardwood shaft.
Length: 325mm. -
PLANISHING HAMMER ROUND PEIN FINISHING PICKRead moreFinishing Picks
Highly polished striking heads and cheeks. With crowned faces. Will remove low spots when metal finishing. Hardwood shaft and finishing beater. Manufactured to BS 4114.
Round Pick and Finishing Panel Beater
Medium weight with crowned face designed to remove high spots. Hickory shaft.
Length: 325mm. -
PLANISHING HAMMER STANDARD SHRINKINGRead moreShrinking Hammers
Highly polished striking heads and cheeks. One flat round face and one milled, serrated square face. Hickory shaft. Manufactured to BS 4114. Specially designed for panel beating on slightly stretched areas of metal. The cross milled face forces small amounts of metal into the spaces created.
Sizes: 325mm (except -7300K = 345mm). -
PLANISHING HAMMER STRAIGHT PEIN FINISHING PICKRead moreFinishing Picks
Highly polished striking heads and cheeks. With crowned faces. Will remove low spots when metal finishing. Hardwood shaft and finishing beater. Manufactured to BS 4114.
Straight Pein and Finishing Panel Beater
Medium weight for general use. Length: 325mm.