Relaunch Promotion
Product Showcase
Category: Carbide B/N Slot Drills - Regular Series
Carbide B/N Slot Drills - Regular Series
Showing 1–16 of 72 results
-
1/16″ 2FL BALL NOSE CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Inch
Regular Series – 2 Flute – Inch
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Inch Tolerances
Diameter: Over 1/16″ ~ up to 1/4″. Tolerance: +0.000, -0.002.
Diameter: Over 1/4″ ~ up to 1″. Tolerance: +0.000, -0.003. -
1/2″ 2FL BALL NOSE CARBIDE SLOT DRILLRead more
Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Inch
Regular Series – 2 Flute – Inch
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Inch Tolerances
Diameter: Over 1/16″ ~ up to 1/4″. Tolerance: +0.000, -0.002.
Diameter: Over 1/4″ ~ up to 1″. Tolerance: +0.000, -0.003. -
1/4″ 2FL BALL NOSE CARBIDE SLOT DRILLRead more
Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Inch
Regular Series – 2 Flute – Inch
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Inch Tolerances
Diameter: Over 1/16″ ~ up to 1/4″. Tolerance: +0.000, -0.002.
Diameter: Over 1/4″ ~ up to 1″. Tolerance: +0.000, -0.003. -
1/4″ 3FL BALL NOSE CARBIDE END MILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 3 Flute – Regular Series, Inch
Regular Series – 3 Flute – Inch
Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Chatter is also significantly reduced. Centre cutting as standard. Manufactured to Ansi Standards.Inch Tolerances
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.000, -0.002.
Diameter: Over 1/4â ~ up to 1â. Tolerance: +0.000, -0.003. -
1/8″ 2FL BALL NOSE CARBIDE SLOT DRILLRead more
Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Inch
Regular Series – 2 Flute – Inch
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Inch Tolerances
Diameter: Over 1/16″ ~ up to 1/4″. Tolerance: +0.000, -0.002.
Diameter: Over 1/4″ ~ up to 1″. Tolerance: +0.000, -0.003. -
1/8″ 3FL BALL NOSE CARBIDE END MILLRead more
Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 3 Flute – Regular Series, Inch
Regular Series – 3 Flute – Inch
Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Chatter is also significantly reduced. Centre cutting as standard. Manufactured to Ansi Standards.Inch Tolerances
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.000, -0.002.
Diameter: Over 1/4â ~ up to 1â. Tolerance: +0.000, -0.003. -
10.0mm 2FL BALL NOSE CARBIDE SLOT DRILLRead more
Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Metric
Regular Series – 2 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
10.0mm 2FL BALL NOSE CARBIDE SLOT DRILLRp772.000Read moreSherwood Carbide Micrograin Plain Shank Slot Drills 2 Flute Ball Nosed
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
10.0mm 3FL BALL NOSE CARBIDE END MILLRead more
Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 3 Flute – Regular Series, Metric
Regular Series – 3 Flute – Metric
Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Chatter is also significantly reduced. Centre cutting as standard. Manufactured to Ansi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
10.0mm ST/SH 2FL B/N SLOT DRILL Q-COATRead moreCarbide Plain Shank Slot Drills Ball Nosed 2 Flute
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6.
SBQ-2PR Carbide Q-CoatSeries 78 – Regular Length SBQ-2PR Carbide Q-Coat.
-
10.0mm ST/SH 3FL HIGH HELIX CARBIDE SLOT DRILLRead moreSwissTech Carbide Plain Shank Slot Drills 3 Flute High Helix: Series 58, Regular – Uncoated
Series 58 – Regular Series
Centre cutting. To Manufacturers Standards.Available as Carbide Uncoated (for general production machining) or TiCN Coated (extends cutter tool life and improves work material surface finish).
-
10.0mm ST/SH SHORT 2FL B/N CARBIDE SLOT DRILLRead moreSwissTech Carbide Plain Shank Slot Drills 2 Flute Ball Nosed: Series 53, Short – Uncoated
Series 53 – Short Series
Centre cutting. To Manufacturers Standards.Available as Carbide Uncoated (for general production machining) or TiCN Coated (extends cutter tool life and improves work material surface finish).
-
10.0mm ST/SH SHORT 2FL B/N CARBIDE SLOT DRILL-TICNRead moreSwissTech Carbide Plain Shank Slot Drills 2 Flute Ball Nosed: Series 53, Short – TiCN Coated
Series 53 – Short Series, TiCN Coated
Centre cutting. To Manufacturers Standards.Available as Carbide Uncoated (for general production machining) or TiCN Coated (extends cutter tool life and improves work material surface finish).
-
10.0mm ST/SH SHORT B/N CARBIDE END MILL – TICNRead moreSwissTech Carbide Plain Shank End Mills 4 Flute Ball Nosed: Series 56, Short – TiCN Coated
Series 56 – Short Series, TiCN Coated
Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6.Available as Carbide Uncoated (for general production machining) or TiCN Coated (extends cutter tool life and improves work material surface finish).
-
12.0mm 2FL BALL NOSE CARBIDE SLOT DRILLRead more
Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Metric
Regular Series – 2 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
12.0mm 2FL BALL NOSE CARBIDE SLOT DRILLRp1.036.000Read more
Sherwood Carbide Micrograin Plain Shank Slot Drills 2 Flute Ball Nosed
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080