Category: Cylinder

Cylinder

Showing 1–16 of 18 results

  • 4-IN-1 CYLINDER HONE

    Kennedy Cylinder Hone Set

    Suitable for honing/deglazing car brake and clutch cylinders, motorcycle, lawnmower, outboard motor engine cylinders, small bore car engine cylinders with capacities between 18mm – 89mm. Self aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all 3 jaw chucks.
    Set contents: Main honing body, 2 leg set – 60mm, 3 leg set – 60mm, 3 leg set – 50mm, 3 medium honing stones – 19, 28.8 and 51mm.
    Overall length: 200mm.
    Supplied in a plastic blow mould case.

    Read more
  • BRAKE CYLINDER HONE 3-LEG

    Cylinder Hone

    For honing of brake cylinders and piston bores with capacities between 19 – 68mm. Self aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all 3 jaw chucks. Supplied complete with a medium grade stone set. For storage purposes legs are retained in position by a triangular clip. This can be removed using long nose pliers or tweezers and should be retained for further use. Replacement stone sets available. Use brake fluid for cutting lubricant.
    Overall length: 200mm.

    Add to cart
  • CYLINDER HONING STONES COARSE 100×9.00mm 3-PCE SET

    Replacement Stone Sets – 100 x 9mm – 3 Piece

    To suit Kennedy cylinder hone KEN5032920K. Also compatible with most other leading brands. Pack of 3.

    Read more
  • CYLINDER HONING STONES FINE 100×9.00mm 3-PCE SET

    Replacement Stone Sets – 100 x 9mm – 3 Piece

    To suit Kennedy cylinder hone KEN5032920K. Also compatible with most other leading brands. Pack of 3.

    Read more
  • CYLINDER HONING STONES MEDIUM 100×9.00mm 3-PCE SET

    Replacement Stone Sets – 100 x 9mm – 3 Piece

    To suit Kennedy cylinder hone KEN5032920K. Also compatible with most other leading brands. Pack of 3.

    Read more
  • CYLINDER HONING STONES MEDIUM 19×4.50mm 3-PCE SET

    Kennedy Replacement Honing Stone Sets – 3 Piece, Medium

    Replacement cylinder honing stones to suit Kennedy cylinder hones. Also compatible with most other leading brands. Pack of 3.

    Read more
  • CYLINDER HONING STONES MEDIUM 29×4.50mm 3-PCE SET

    Kennedy Replacement Honing Stone Sets – 3 Piece, Medium

    Replacement cylinder honing stones to suit Kennedy cylinder hones. Also compatible with most other leading brands. Pack of 3.

    Read more
  • CYLINDER HONING STONES MEDIUM 51×7.00mm 3-PCE SET

    Kennedy Replacement Honing Stone Sets – 3 Piece, Medium

    Replacement cylinder honing stones to suit Kennedy cylinder hones. Also compatible with most other leading brands. Pack of 3.

    Read more
  • EXTRA LONG VALVE SEAL RING PLIERS

    Kennedy Straight Head Valve Seal Ring Pliers

    Standard Length
    For the easy removal of most valve stem seals and lower valve spring guides in restricted areas above the cylinder head. Overall length: 250mm, 50mm reach.

    Extra Long
    For the easy removal of most valve stem seals in multi-valve engines in restricted areas above the cylinder head. Gripping serrations inside the jaws aid gripping the outside diameter of the valve stem seal. Steel pliers with double riveted metal handles.
    Overall length: 270mm, 80mm reach.

    Read more
  • HEAVY DUTY CYLINDER HONE 3-LEG

    Heavy-Duty Cylinder Hone

    For honing of brake cylinders and piston bores with capacities between 51 – 178mm. Self-aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all three jaw chucks. Supplied complete with a fine grade stone set. For storage purposes legs are retained in position by a triangular clip. This can be removed using long nose pliers or tweezers and should be retained for further use. Replacement stone sets available. Use brake fluid for cutting lubricant.
    Overall length: 290mm.

    Read more
  • PISTON RING COMPRESSOR 57-125mm CAPACITY 80mm HT.

    Kennedy Piston Ring Compressors

    The compressor gently compresses the piston rings into position reducing the risk of damage to components during installation. Key operated with ratchet mechanism and safety valve for combining safe rapid compression with positive control. Made from tempered spring steel complete with steel key.

    PRC-540
    For passenger car vehicle engines. Capacity: 57 – 125mm (2 1/4” – 5”). Height: 80mm (3 1/4”).

    PRC-730
    For car/light commercial vehicle engines. Capacity: 90 – 175mm (3 1/2” – 7”). Height: 100mm (4”).

    PRC-765
    For heavy commercial vehicle engines. Capacity: 90 – 175mm (3 1/2” – 7”). Height: 165mm (6 1/2”).

    Read more
  • PISTON RING COMPRESSOR 90-175mm CAPACITY 100mm HT.

    Kennedy Piston Ring Compressors

    The compressor gently compresses the piston rings into position reducing the risk of damage to components during installation. Key operated with ratchet mechanism and safety valve for combining safe rapid compression with positive control. Made from tempered spring steel complete with steel key.

    PRC-540
    For passenger car vehicle engines. Capacity: 57 – 125mm (2 1/4” – 5”). Height: 80mm (3 1/4”).

    PRC-730
    For car/light commercial vehicle engines. Capacity: 90 – 175mm (3 1/2” – 7”). Height: 100mm (4”).

    PRC-765
    For heavy commercial vehicle engines. Capacity: 90 – 175mm (3 1/2” – 7”). Height: 165mm (6 1/2”).

    Read more
  • PISTON RING COMPRESSOR 90-175mm CAPACITY 165mm HT.

    Kennedy Piston Ring Compressors

    The compressor gently compresses the piston rings into position reducing the risk of damage to components during installation. Key operated with ratchet mechanism and safety valve for combining safe rapid compression with positive control. Made from tempered spring steel complete with steel key.

    PRC-540
    For passenger car vehicle engines. Capacity: 57 – 125mm (2 1/4” – 5”). Height: 80mm (3 1/4”).

    PRC-730
    For car/light commercial vehicle engines. Capacity: 90 – 175mm (3 1/2” – 7”). Height: 100mm (4”).

    PRC-765
    For heavy commercial vehicle engines. Capacity: 90 – 175mm (3 1/2” – 7”). Height: 165mm (6 1/2”).

    Read more
  • PISTON RING PLIERS 50-100mm CAPACITY

    Kennedy Piston Ring Pliers

    To enable fast Installation or removal of piston rings. A self-adjusting spring tensioned mechanism manufactured from nickel-plated steel with PVC handles for extra grip.
    Capacity: 50 – 100mm (2″ – 4″)

    Add to cart
  • VALVE SEAL RING PLIERS

    Kennedy Straight Head Valve Seal Ring Pliers

    Standard Length
    For the easy removal of most valve stem seals and lower valve spring guides in restricted areas above the cylinder head. Overall length: 250mm, 50mm reach.

    Extra Long
    For the easy removal of most valve stem seals in multi-valve engines in restricted areas above the cylinder head. Gripping serrations inside the jaws aid gripping the outside diameter of the valve stem seal. Steel pliers with double riveted metal handles.
    Overall length: 270mm, 80mm reach.

    Read more
  • VALVE SPRING COMPRESSOR 3″- 9″ CAPACITY

    Kennedy Valve & Piston Ring Compressors

    Designed for use on production lines as well as in the automotive workshop. Able to
    cope with occasional commercial use. Manufactured from bright nickel plated steel with
    PVC cushion grips.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop