Archives: Products
Showing 7921–7936 of 23773 results
-
3-LEVER DEADLOCK 3.0″ SCPRead more3 Lever Deadlock – Satin Plate Chrome Finish
711
64mm (2 1/2″) case size. Supplied with square or radius forend and strike. Supplied with two keys. Satin chrome plate finish. -
3-LEVER SASHLOCK 2.5″ PBRead more3 Lever Sashlock Satin – Chrome Plate Finish
710
Easily reversible latchbolt, adjustable springing feature, 64mm (2 1/2″) case size, supplied with square or radius forend and strike. Supplied with two keys.
Satin chrome plate finish. -
3-LEVER SASHLOCK 2.5″ SCPRead more3 Lever Sashlock Satin – Chrome Plate Finish
710
Easily reversible latchbolt, adjustable springing feature, 64mm (2 1/2″) case size, supplied with square or radius forend and strike. Supplied with two keys.
Satin chrome plate finish. -
3-LEVER SASHLOCK 3.0″ PBRead more3 Lever Sashlock Satin – Chrome Plate Finish
710
Easily reversible latchbolt, adjustable springing feature, 64mm (2 1/2″) case size, supplied with square or radius forend and strike. Supplied with two keys.
Satin chrome plate finish. -
3-LEVER SASHLOCK 3.0″ SCPRead more3 Lever Sashlock Satin – Chrome Plate Finish
710
Easily reversible latchbolt, adjustable springing feature, 64mm (2 1/2″) case size, supplied with square or radius forend and strike. Supplied with two keys.
Satin chrome plate finish. -
3-PCE WHEEL NUT IMPACT SOCKET SET 1/2″ SQ. DR.Read moreKennedy Impact Wheel Nut Sockets 1/2″ Sq. Dr. – 3 Piece Set
3 Piece Set
Contains one of each size 17, 19, 21mm -
3-POCKET 2-LOOP LARGE NAIL & TOOL POUCH OIL TANRead moreNail & Tool Pouch – Large
3 Pocket 2 Loop Nail & Tool Pouch – Oil Tan
Large nail and tool pouch with three pockets and two tool loops. Fully brass riveted construction. Manufactured from oil tanned leather. -
3-POINT MAG MEDIUM DUTY FITMENTRead moreKennedy Magnetic Stand Fitments – Medium Duty Fitment, 3 Point
All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.
Medium Duty Fitment – 3 Point
Fitted as standard to KEN- 333-2110K.
3 point adjustable column: 15 x 280mm max.
Threaded: M8 x 1.25mm.
Clamp hole: 8mm. -
3-ROW BRASS WIRE SCRATCH BRUSHRead moreWire Scratch Brushes
These brass wire brushes are also used in situations where there could be a potential fire or explosion hazard. Brass wire brushes will not cause a spark. Hardwood handle.
-
3-ROW PLASTIC HANDLE WIRESCRATCH BRUSHAdd to cartWire Scratch Brushes
for cleaning all rough surfaces on a range of materials to remove paint, dirt, rust and stubborn deposits. Plastic handled with cast steel bristles for general purpose work.
*with scraper -
3-ROW STAINLESS STEEL WIRE SCRATCH BRUSHRead moreWire Scratch Brushes
Stainless steel wire scratch brushes are used on stainless steel and aluminum fabricated products – predominantly in stainless steel welding processes where the use of an ordinary wire scratch brush would create the risk of contamination of the weld. Hardwood handle.
-
3-ROW WIRE SCRATCH BRUSH- PLAIN BACKRead moreWire Scratch Brushes
Designed for cleaning all rough surfaces on a variety of materials to remove paint, dirt, rust and stubborn deposits. Hardwood stocks.
-
3-TONNE LOW PROFILE LONGREACH TROLLEY JACKRead more2 Tonne Low Profile Long Reach Trolley Jack
Low Profile Long Reach Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction castors, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle. For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place. -
3-TRAY TOOL TROLLEYRead moreSenator 3-Tray Tool Trolley
Bolted steel construction. 100mm industrial castors. Brakes fitted to two end castors. Hard wearing powder coated finish.
-
3-WAY MALE SNAP ACTION CONNECTORRead more3 Way Male Snap Action Connector
For splitting one supply hose into two outlets, with all three hoses having female snap action connectors.
-
3,4 & 6mm 3-IN-1 MINI PIPE BENDERRead moreKennedy 3-in-1 Bender
For bending 3, 4 and 6mm diameter copper and aluminium tubes up to 90°. With a graduated scale for partial bending. Ribbed die-cast aluminium construction for lightness and strength.
Length: 140mm.