Archives: Products

Showing 7937–7952 of 23773 results

3.0 42DEG WELDON STD HIGH HELIX 2FL S/DRILL-8% CO

SwissTech HSS-Co 8% Weldon Shank 42Â° High Helix Slot Drills 2 Flute For Aluminium: Series 15, Regular – Uncoated

Series 15 – Regular Length
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank cutting diameter to +0.04 -0.0.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 SCR LONG 3FL SLOT DRILL-8% CO

SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 34, Long- Uncoated

Series 34 – Long Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 SCR SHORT 2FL SLOT DRILL-8% CO

SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 28, Short – Uncoated

Series 28 – Short Series
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 SCR SHORT 2FL SLOT DRILL-TICN-8% CO

SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 28, Short – TiCN Coated

Series 28 – Short Series, TiCN Coated
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 SCR SHORT 3FL SLOT DRILL-8% CO

SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 32, Short – Uncoated

Series 32 – Short Series
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 SCR STANDARD END MILL-TICN-8% CO

SwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 36, Regular – TiCN Coated

Series 36 – Regular Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 SCR STD 3FL SLOT DRILL-8% CO

SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 33, Regular – Uncoated

Series 33 – Regular Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 SCR STD 3FL SLOT DRILL-TICN-8% CO

SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 33, Regular – TiCN Coated

Series 33 – Regular Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 SCR STD END MILL-8% CO

SwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 36, Regular – Uncoated

Series 36 – Regular Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 WELDON LONG 2FL B/NOSE S/DRILL-8% CO

SwissTech HSS-Co 8% Weldon Shank Ball Nose Slot Drills 2 Flute: Series 12, Long – Uncoated

Series 12 – Long Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 WELDON LONG 2FL SLOT DRILL-8% CO

SwissTech HSS-Co 8% Weldon Shank Slot Drills 2 Flute: Series 03, Long – Uncoated

Series 03 – Long Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 WELDON LONG 3FL SLOT DRILL-8% CO

SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 07, Long – Uncoated

Series 07 – Long Series
Dimensions to DIN 844 Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 WELDON LONG 3FL SLOT DRILL-TiALN-8% CO

SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 07, Long – TiALN Coated

Series 07 – Long Series, TiALN Coated
Dimensions to DIN 844 Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 WELDON LONG 3FL SLOT DRILL-TICN-8% CO

SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 07, Long – TiCN Coated

Series 07 – Long Series, TiCN Coated
Dimensions to DIN 844 Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 WELDON LONG END MILL-8% CO

SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 10, Long – Uncoated

Series 10 – Long Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
3.0 WELDON LONG END MILL-TiALN-8% CO

SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 10, Long – TiALN Coated

Series 10 – Long Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more