Archives: Products
Showing 7889–7904 of 23773 results
-
3 PCE HAND CURVED TOOTH MILLED FILE SETRp663.000Read moreCurved Tooth File Set
Curved Cut
Teeth are arranged in curved contours across the file face. Normally used in automotive body shops for smoothing body panels.Curved Tooth File Set
Contents: (1 of each) Flat, 200mm (8â), 255mm (10â) and 305mm (12â) standard cut. -
3 ZINC PLATED HOSE CLIPSRead moreZinc-Plated Hose Clips
Non-slip worm drive. Precision manufactured from the finest British steels to BS 5315. Passivated zinc finish to give double protection. For automotive, gas, plumbing and agricultural applications.
-
3- TONNE 372mm MAXIMUM HEIGHT BOTTLE JACKRead moreKennedy Hydraulic Bottle Jacks
With large cast iron bases with a steel cylinder housing and an adjusting notched saddle. Fitted with an overload protection valve. Two piece âpumpingâ handle also operates hydraulic release. Use on a firm level surface, do not work under the vehicle until another means of support, such as axle stands, are used. Models B234, B337 and B541 are supplied in a robust blow moulded carry case. Complies with the EC Machinery Directive. GS and TUV approved. (Load ratings are âmetric tonnesâ i.e. 1 tonne = 1,000kg). All supplied with spare seals.
-
3- TONNE QUICK LIFT HYDRAULIC TROLLEY JACKRead moreKennedy 3 Tonne Quick Lift Trolley Jack
3 tonne capacity. One stroke instant lift foot pedal, raises the saddle up to jack point to increase productivity. Constructed from heavy gauge steel. 1m, two-piece handle. 120mm diameter saddle. Automatic safety overload protection. Positive twist, lock and release mechanism. Heavy duty rear swivelling castor wheels.
Maximum load: 3000kg.
Minimum height: 145mm.
Maximum height: 490mm. -
3-1/2″ A/F IMPACT SOCKET1″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive Inch Size, Standard Length, 6-Point
1â Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
3-1/2″ CAPACITY TOOLMAKERS CLAMPRead moreKennedy Toolmakerâs Clamps
Hardened and tempered jaws with spring tension clips.
-
3-1/2″ POCKET TYPE SCRIBERRead moreScribers: Pocket Scriber
Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist’s standard type, double ended, which are mainly used in conjunction with surface gauges.
Pocket Scriber
With steel tip only, also a reversible point to prevent snagging of clothing when clipped into pocket. With knurled bodies for extra grip. Overall length: 88mm. -
3-1/8″ A/F DEEP IMPACT SKT 1″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive Inch Size, Deep Length, 6-Point
1â Drive Inch Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
3-1/8″ A/F IMPACT SOCKET1″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive Inch Size, Standard Length, 6-Point
1â Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
3-12mm HSS-COBALT PM 2FLB/N WELD’ S/DRILL SET P/PRead moreSwiss+Tech HSS-E PM 2 Flute Ball Nose Slot Drill Peak Power Set, 7 Pieces: Series 97
Series 97 – Weldon Shank – 7 Piece Set
Centre cutting. To Manufacturers standards. Weldon shank to DIN 1835B. Shank diameter to h6. Dimensions to DIN 844. Contents: 3, 4, 5, 6, 8, 10 and 12mm.The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds.
Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity.
These cutters are further enhanced by the SwissTech Peak Power coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.
-
3-14mm TAPERED SHEET & TUBE DRILLRead moreSherwood HSS Taper Sheet & Tube Drills
For producing clean holes in sheet metal and other thin-walled materials. Efficient cutting geometry, no pre-drilled pilot hole and the diameter of the finished hole is infinitely variable within the range of each drill, according to depth of feed.
-
3-16mm 6JT SUPRA-RAPID KEYLESS CHUCKRead moreKennedy Supra-Rapid Clamping Industrial Keyless Drill Chucks
Fully hardened and ground working parts. The jaws are centre ground for alignment concentricity. Robustly designed for durability and wear resistance in the most arduous of industrial applications on stationary drilling machines. Unsuitable for reversing drills.
-
3-16mm B16 DIN CHUCK KEYEDRead moreKennedy Heavy Duty Industrial Keyed Drill Chuck
Fully hardened and ground working parts. The jaws are centre ground for alignment and concentricity. Key holes and teeth are fully hardened for durability and wear resistance. To correctly tighten your keyed drill chuck use all key holes in turn to guarantee even pressure and maximum grip. Suitable for use on machine tools and all types of industrial power tools. Supplied with key. Manufactured to DIN 6349.
* Primarily for use with hand operated machines.
â Not suitable for reversing drills. -
3-16mm B16 DIN CHUCK KEYLESSRead moreKennedy Supra-Rapid Clamping Industrial Keyless Drill Chucks
Fully hardened and ground working parts. The jaws are centre ground for alignment concentricity. Robustly designed for durability and wear resistance in the most arduous of industrial applications on stationary drilling machines. Unsuitable for reversing drills.
-
3-16mm JT6 KEYLESS RAPIDCLAMP DRILL CHUCKRead moreSpiro-Rapid Clamping Industrial Keyless Drill Chucks
Allows quick tool change, while maintaining high precision and high concentricity. Fully hardened jaws, sleeve and retaining ring for durability and wear resistance. Self-tightening.
-
3-22mm (1/8″-7/8″) MINI TUBING CUTTERRead moreKennedy Mini Pipe Cutter
Compact and robust construction ideal for use in confined spaces. Grooved rollers allow close-to-flare cuts. Large feed screw for accurate cutting of aluminium, brass, copper and steel tubing.
Length: 66mm.