Category: HSS-Co 3fl & Multi-flute

HSS-Co 3fl & Multi-flute

Showing 1–16 of 90 results

  • 1/2″ x 90DEG HSS ROSE MULTI-FLUTE S/S COUNTERSINK
    Rp323.000

    Kennedy HSS-Co 5% Multi Flute Rose Pattern Straight Shank Countersinks

    Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Straight shank. Manufactured to BS328:Part 5:1983.

    Rose Pattern
    Inclusive angle 90°. Overall length: 52mm.

    Read more
  • 1/2″ x 90DEG MULTI FLUTE H/D S/S COUNTERSINK
    Rp286.000

    HSS-Co 5% Multi Flute Straight Shank Countersinks

    Heavy Duty
    Inclusive angle 90°. Overall length: 40mm.

    Read more
  • 1/2″x 90DEG HSS ROSE MULTI FLUTE S/S COUNTERSINK
    Rp287.000

    Sherwood HSS-Co 5% Multi Flute Rose Pattern Straight Shank Countersinks

    Rose Pattern
    Inclusive angle 90°. Overall length: 52mm.

    Read more
  • 1/2″x 90DEG MULTI FLUTE H/D S/S COUNTERSINK
    Rp254.000

    Sherwood HSS-Co 5% Multi Flute Rose Pattern Straight Shank Countersinks

    Heavy Duty
    Inclusive angle 90°. Overall length: 40mm.

    Read more
  • 1/4″x 0.53″ 100DEG HSS-COBALT 3FL PILOTED C/SINK

    HSS-Co 5% 3 Flute Piloted Countersinks

    For the production of high precision concentrically centred countersinks in most metals where pilot holes have been pre-drilled. Shank diameter: 3/16″

    Inclined Angles for Countersunk Socket Head Screws
    Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: up to M20. Countersink Angle: 90°.
    Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: over M20. Countersink Angle: 60°.
    Thread Series: UNC/F. Standard: ANSI B 18.3. Thread Size: No.0 to 1″. Countersink Angle: 82°.
    Thread Series: BSW/F. Standard: BS 2470. Thread Size: 1/8″ to 1″. Countersink Angle: 90°.
    Thread Series: BA. Standard: BS 2470. Thread Size: 8BA to 0BA. Countersink Angle: 90°.

    Read more
  • 1/8″x 0.252″ 100DEG HSS-COBALT 3FL PILOTED C/SINK

    HSS-Co 5% 3 Flute Piloted Countersinks

    For the production of high precision concentrically centred countersinks in most metals where pilot holes have been pre-drilled. Shank diameter: 3/16″

    Inclined Angles for Countersunk Socket Head Screws
    Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: up to M20. Countersink Angle: 90°.
    Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: over M20. Countersink Angle: 60°.
    Thread Series: UNC/F. Standard: ANSI B 18.3. Thread Size: No.0 to 1″. Countersink Angle: 82°.
    Thread Series: BSW/F. Standard: BS 2470. Thread Size: 1/8″ to 1″. Countersink Angle: 90°.
    Thread Series: BA. Standard: BS 2470. Thread Size: 8BA to 0BA. Countersink Angle: 90°.

    Read more
  • 1/8″x 1/4″ 100DEG HSS-COBALT 3FL S/S PILOTED C/SINK
    Rp193.000

    HSS-Co 5% 3 Flute Piloted Countersinks

    For the production of high precision concentrically centred countersinks in most metals where pilot holes have been pre-drilled. Shank diameter: 3/16″

    Inclined Angles for Countersunk Socket Head Screws
    Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: up to M20. Countersink Angle: 90°.
    Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: over M20. Countersink Angle: 60°.
    Thread Series: UNC/F. Standard: ANSI B 18.3. Thread Size: No.0 to 1″. Countersink Angle: 82°.
    Thread Series: BSW/F. Standard: BS 2470. Thread Size: 1/8″ to 1″. Countersink Angle: 90°.
    Thread Series: BA. Standard: BS 2470. Thread Size: 8BA to 0BA. Countersink Angle: 90°.

    Read more
  • 1/8″x 1/4″ 120DEG HSS-COBALT 3FL S/S PILOTED C/SINK
    Rp193.000

    HSS-Co 5% 3 Flute Piloted Countersinks

    For the production of high precision concentrically centred countersinks in most metals where pilot holes have been pre-drilled. Shank diameter: 3/16″

    Inclined Angles for Countersunk Socket Head Screws
    Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: up to M20. Countersink Angle: 90°.
    Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: over M20. Countersink Angle: 60°.
    Thread Series: UNC/F. Standard: ANSI B 18.3. Thread Size: No.0 to 1″. Countersink Angle: 82°.
    Thread Series: BSW/F. Standard: BS 2470. Thread Size: 1/8″ to 1″. Countersink Angle: 90°.
    Thread Series: BA. Standard: BS 2470. Thread Size: 8BA to 0BA. Countersink Angle: 90°.

    Read more
  • 10-15mm 90DEG HSS-COBALTS/S SINGLE HOLE C/SINK
    Rp662.000

    Kennedy HSS-E Co 5% Countersinks Single Hole

    Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Straight shank. Manufactured to BS 328 : Part 5 : 1983. Inclusive angle 90°.

    Read more
  • 10-15mmx 90DEG SINGLE HOLE COUNTERSINK
    Rp589.000

    Sherwood HSS-E Co 5% Countersinks Single Hole

    Manufactured from HSS-E cobalt for deburring and chamfering.
    Straight shank. Manufactured to BS328 : Part 5 : 1983. Inclusive angle 90°.

    Read more
  • 10.40mm 100DEG COUNTERSINK
    Rp275.000

    HSS-Co 5% High Performance Countersink – 3 Flute, 100°

    A­ chatter-free cutter giving an excellent burr-free finish. Capable of deburring and countersinking in one stroke with no ‘back-off’ of tool.
    Also free countersinking of aluminium with no secondary bulge. For special applications and exotic materials, a choice of hard coatings is available.

    Read more
  • 10.40mm 60DEG COUNTERSINK
    Rp275.000

    HSS-Co 5% High Performance Countersink – 3 Flute, 60°

    A­ chatter-free cutter giving an excellent burr-free finish. Capable of deburring and countersinking in one stroke with no ‘back-off’ of tool.
    Also free countersinking of aluminium with no secondary bulge. For special applications and exotic materials, a choice of hard coatings is available.

    Read more
  • 10.40mm 90DEG COUNTERSINK
    Rp275.000

    HSS-Co 5% High Performance Countersink – 3 Flute, 90°

    A­ chatter-free cutter giving an excellent burr-free finish. Capable of deburring and countersinking in one stroke with no ‘back-off’ of tool.
    Also free countersinking of aluminium with no secondary bulge. For special applications and exotic materials, a choice of hard coatings is available.

    Read more
  • 10mm 82DEG HSS-COBALT S/S COUNTERSINK
    Rp275.000

    HSS-Co 5% 82° Countersinks

    3 Flute – Straight Shank
    Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Manufactured to BS 328 : Part 5 : 1983. Inclusive angle 82°.

    Read more
  • 10mm 90DEG HSS-COBALT 3FL S/S COUNTERSINK
    Rp283.000

    HSS-Co 5% 3 Flute Countersinks – Straight Shank

    90° Heavy Duty
    Manufactured from HSS-E cobalt steel for deburring and chamfering
    of most metals and plastics. Manufactured to BS328 : Part 5 : 1983.

    Add to cart
  • 10mm 90DEG HSS-COBALT S/S COUNTERSINK
    Rp315.000

    HSS-Co 5% 3 Flute Countersinks – Straight Shank

    3 Flute – Straight Shank
    Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Manufactured to BS 328 : Part 5 : 1983. Inclusive angle 90°.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop