Relaunch Promotion
Product Showcase
Category: HSS-Co. Roughing - Regular Series
HSS-Co. Roughing - Regular Series
Showing 1–16 of 87 results
-
10.0 SCR STD COARSE ROUGH END MILL-TICNRead moreSwissTech HSS-Co 8% Threaded Shank Coarse Pitch Roughing End Mills: Series 42, Regular – TiCN Coated
Series 42 – Regular Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 WELDON STD COARSE ROUGH E/MILL-8% CORead moreSwissTech HSS-Co 8% Weldon Shank Coarse Pitch Ripper Cutters: Series 17, Regular – Uncoated
Series 17 – Regular Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 WELDON STD COARSE ROUGH E/MILL-TiALNRead moreSwissTech HSS-Co 8% Weldon Shank Coarse Pitch Ripper Cutters: Series 17, Regular – TiALN Coated
Series 17 – Regular Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 WELDON STD COARSE ROUGH E/MILL-TICNRead more
SwissTech HSS-Co 8% Weldon Shank Coarse Pitch Ripper Cutters: Series 17, Regular – TiCN Coated
Series 17 – Regular Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 WELDON STD FINE ROUGH E/MILL-8% CORead moreSwisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 25, Regular – Uncoated
Series 25 – Regular Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 WELDON STD FINE ROUGH E/MILL-TiALN-8% CORead moreSwisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 25, Regular – TiALN Coated
Series 25 – Regular Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 WELDON STD FINE ROUGH E/MILL-TICN-8% CORead moreSwisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 25, Regular – TiCN Coated
Series 25 – Regular Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10mm HSS-COBALT PM WELDON C/P RIPPER P/POWERRead moreSwissTech HSS-E PM Coated Coarse Pitch Ripper Cutters: Series 99, Regular – Peak Power Coated
Series 99 – Regular
Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6.Dimensions to DIN 844.The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds.
Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity.
These cutters are further enhanced by the SwissTech Peak Power? coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.
-
10mm HSS-COBALT PM WELDON F/P RIPPER P/POWERRead moreSwissTech HSS-E PM Coated Fine Pitch Ripper: Series 94, Regular – Peak Power Coated
Series 94 – Regular
Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6. Dimensions to DIN 844.The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds.
Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity.
These cutters are further enhanced by the SwissTech Peak Power? coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.
-
10mm HSS-COBALT SC/SH F/P RIPPERRead moreSherwood HSS-EV Threaded Shank Fine Pitch Ripper Cutters
Regular Series
4 flute ripper cutters. Manufactured from sintered HSS-EV extra vanadium steel. Knuckle form, h8 tolerance. Standard length. Dimensions to DIN 844. Shank to DIN 1835D. -
10mm HSS-COBALT SC/SH KNUCKLE RIPPERRead moreSherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Standard Series – Metric
Standard Series K412T
Knuckle Form
For use when heavy metal removal and good surface finish are required. Uncoated. Bright finish. Flute type: 25° spiral, roughing truncated. Shank diameter to js14.Metric Tolerances
Diameter ± 0.127mm -
10mm HSS-COBALT WELDON C/P RIPPERRp318.000Read moreSherwood HSS-E Weldon Shank Coarse Pitch Ripper Cutters
Regular Series
Industrial quality for shaping and forming metal components. 4 flute ripper cutters.
Manufactured from sintered HSS-E extra vanadium steel. Knuckle form, h8 tolerance, standard length. Shank to DIN 1835D. -
10mm HSS-COBALT WELDON F/P RIPPERRp318.000Read moreSherwood HSS-EV Weldon Shank Fine Pitch Ripper Cutters
Regular Series
4 flute ripper cutters. Manufactured from sintered HSS-EV extra vanadium steel.
Knuckle form. h8 tolerance. Standard length. Dimensions to DIN 844. Shank to DIN 1835D. -
11mm HSS-COBALT SC/SH KNUCKLE RIPPERRead more
Sherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Standard Series – Metric
Standard Series K412T
Knuckle Form
For use when heavy metal removal and good surface finish are required. Uncoated. Bright finish. Flute type: 25° spiral, roughing truncated. Shank diameter to js14.Metric Tolerances
Diameter ± 0.127mm -
12.0 SCR STD COARSE ROUGH END MILL-TICNRead more
SwissTech HSS-Co 8% Threaded Shank Coarse Pitch Roughing End Mills: Series 42, Regular – TiCN Coated
Series 42 – Regular Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
12.0 WELDON STD COARSE ROUGH E/MILL-8% CORead more
SwissTech HSS-Co 8% Weldon Shank Coarse Pitch Ripper Cutters: Series 17, Regular – Uncoated
Series 17 – Regular Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).