Category: Enginners Files-Smooth Cut

Enginners Files-Smooth Cut

Showing 1–16 of 42 results

  • 10″ (250mm) FLAT SMOOTH ENGINEERS FILE
    Rp82.000

    Kennedy Industrial Quality Engineer’s Hand Files – Flat

    Flat
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Add to cart
  • 10″ (250mm) HALF ROUND SMOOTH ENGINEERS FILE
    Rp127.000

    Kennedy Industrial Quality Engineer’s Hand Files – Half Round

    Half-Round
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 10″ (250mm) HAND SMOOTH ENGINEERS FILE
    Rp82.000

    Engineer’s Hand Files

    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Add to cart
  • 10″ (250mm) ROUND SMOOTH ENGINEERS FILE
    Rp70.000

    Kennedy Industrial Quality Engineer’s Hand Files – Round

    Round
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 10″ (250mm) SQUARE SMOOTH ENGINEERS FILE
    Rp72.000

    Kennedy Industrial Quality Engineer’s Hand Files – Square

    Square
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 10″ (250mm) THREE SQUARE SMOOTH ENGINEERS FILE
    Rp90.000

    Kennedy Industrial Quality Engineer’s Hand Files – Three Square

    Three Square
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 12″ (300mm) FLAT SMOOTH ENGINEERS FILE
    Rp106.000

    Kennedy Industrial Quality Engineer’s Hand Files – Flat

    Flat
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 12″ (300mm) HALF ROUND SMOOTH ENGINEERS FILE
    Rp167.000

    Kennedy Industrial Quality Engineer’s Hand Files – Half Round

    Half-Round
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 12″ (300mm) HAND SMOOTH ENGINEERS FILE
    Rp106.000

    Engineer’s Hand Files

    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 12″ (300mm) ROUND SMOOTH ENGINEERS FILE
    Rp102.000

    Kennedy Industrial Quality Engineer’s Hand Files – Round

    Round
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Add to cart
  • 12″ (300mm) SQUARE SMOOTH ENGINEERS FILE
    Rp126.000

    Kennedy Industrial Quality Engineer’s Hand Files – Square

    Square
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 12″ (300mm) THREE SQUARE SMOOTH ENGINEERS FILE
    Rp140.000

    Kennedy Industrial Quality Engineer’s Hand Files – Three Square

    Three Square
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 14″ (350mm) FLAT SMOOTH ENGINEERS FILE
    Rp156.000

    Kennedy Industrial Quality Engineer’s Hand Files – Flat

    Flat
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 14″ (350mm) HALF ROUND SMOOTH ENGINEERS FILE
    Rp234.000

    Kennedy Industrial Quality Engineer’s Hand Files – Half Round

    Half-Round
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 14″ (350mm) HAND SMOOTH ENGINEERS FILE
    Rp155.000

    Engineer’s Hand Files

    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
  • 14″ (350mm) ROUND SMOOTH ENGINEERS FILE
    Rp166.000

    Kennedy Industrial Quality Engineer’s Hand Files – Round

    Round
    Available in a comprehensive range of shapes and sizes.
    Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

    Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
    Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop