Relaunch Promotion
Product Showcase
Category: Trowels & Plasterwork Tools
Trowels & Plasterwork Tools
Showing all 16 results
-
10″ BROAD HEEL LONDON PATTERN BRICK TROWELRead moreKennedy Professional Brick Trowel
Manufactured from high carbon tempered and hardened steel with a ground and polished finish, tapered to remain rigid to the tip. Polished and varnished high angle handle, with chromed ferrule, holds the tang in place preventing the blade from twisting.
-
11.1/2″x4″ WOODEN FLOATRead moreKennedy Wooden Skimming Float
Manufactured from selected timber. Ideal for producing a sandy surface finish when rendering plaster or concrete.
-
11″ BROAD HEEL BRICK TROWELRead moreSenator Builderâs Trowels: Broad Heel Brick Trowel
Broad Heel Brick Trowel
11â heel width. London pattern, a smooth rounded end wooden handle with integral tang.Ground polished, hardened and tempered high carbon steel alloy blades, tapered to remain rigid right to the tip with high angle handles for improved knuckle clearance and control. Chromed ferrules hold the forged tang firmly.
-
11″x11″ (280mmx280mm) ALUMINIUM PLASTERERS HAWKRead moreSenator Plastererâs Hawk
With single screw fixing, zinc plated for corrosion protection.Heavy gauge sheet aluminium platform, highly polished, mirror finish. Suitable for DIY use.
-
11″x4.1/2″ ALUMINIUM SHANK BANANA TYPE TROWELAdd to cartKennedy Plastererâs Trowel
Aluminium shank single tang banana pattern. Six rivet construction âcross groundâ to prevent drag. For laying on and finishing plaster. Manufactured to the high standards expected by todayâs trade.
-
11″x4.1/2″ PLASTERERS FINISHING TROWELRead moreSenator Plasterer’s Trowel – Economy
Economy
Single tang, banana shaped handle with six concealed welded rivets to securely fix âcross groundâ, hardened and tempered blade. -
115-290cm EXTENDING SUPPORT PROPRead moreKennedy Extending Support Prop
This lightweight support prop is designed to give a helping hand when fixing overhead panelling and boarding. It has 125 x 80mm flat plates at both ends with a swivel ball joint for ease of use and to avoid damage to panel when pressure is applied.
It has four pre-set adjustable height ranges: 1.16 to 2m, 1.46 to 2.3m, 1.76 to 2.6m, 2.06 to 2.9m. -
12″x12″ PLASTERERS HAWKRead moreKennedy Plasterersâ Hawk
The Kennedy plasterers Hawk is manufactured from lightweight aluminium, the blade is scoured to prevent plaster slip-off. With a detachable wooden handle with a sponge rubber callous preventer to reduce discomfort during periods of extended use.
-
400mm LIGHT DUTY PAINT & PLASTER MIXERRead moreKennedy Paint & Plaster Mixer
Used for mixing plaster, concrete, filler, epoxy resin, emulsion paint and wallpaper paste. The stirring end should be fully immersed before the shaft is turned.
Light Duty Shaft
8mm hex. Overall length: 400mm.Heavy Duty Shaft
12mm hex. Overall length: 600mm. -
6″ LONDON PATTERN POINTING TROWELRead moreSenator Builderâs Trowels: Pointing Trowel
Pointing Trowel
Ground polished, hardened and tempered high carbon steel alloy blade, high angle handle. Chromed ferrule holds the forged tang firmly. London pattern, asmooth rounded
end wooden handle with integral tang.Ground polished, hardened and tempered high carbon steel alloy blades, tapered to remain rigid right to the tip with high angle handles for improved knuckle clearance and control. Chromed ferrules hold the forged tang firmly.
-
6″ NEW LONDON PATTERN POINTING TROWELRead moreKennedy Professional Pointing Trowel
Made from high carbon tempered and hardened steel with a ground and polished finish. Tapered to remain rigid to the tip. Polished and varnished high angle handles for greater balance, control and knuckle clearance, with chromed ferrule. Holds the forged steel tang in place preventing the blade from twisting.
-
600mm HEAVY DUTY PAINT & PLASTER MIXERRead moreKennedy Paint & Plaster Mixer
Used for mixing plaster, concrete, filler, epoxy resin, emulsion paint and wallpaper paste. The stirring end should be fully immersed before the shaft is turned.
Light Duty Shaft
8mm hex. Overall length: 400mm.Heavy Duty Shaft
12mm hex. Overall length: 600mm. -
7″ GAUGING TROWELRead moreKennedy Gauging Trowel
London pattern, a smooth rounded end wooden handle with integral tang.
-
7″ GAUGING TROWELRead moreSenator Builderâs Trowels: Gauging Trowel
Gauging Trowel
London pattern, a smooth rounded end wooden handle with integral tang.Ground polished, hardened and tempered high carbon steel alloy blades, tapered to remain rigid right to the tip with high angle handles for improved knuckle clearance and control. Chromed ferrules hold the forged tang firmly.
-
GROUT/ADHESIVE TROWELRead moreKennedy Adhesive Trowel
High quality moulded and contoured handle. Large base with two coarse pitched edges and two fine pitched edges. Suitable for use with all tile and carpet adhesives.
-
PLASTERERS BATH 165LTRRead moreKennedy Plastererâs Bath
BM197
Manufactured from polyethylene, virtually unbreakable. Guaranteed not to rot, rust, crack or distort. Strong, light and easily carried.