Category: HSS-Co. Ripper - Long Series

HSS-Co. Ripper - Long Series

Showing 1–16 of 45 results

  • 10.0 WELDON LONG COARSE ROUGH E/MILL-8% CO

    SwissTech HSS-Co 8% Weldon Shank Coarse Pitch Ripper Cutters: Series 18, Long – Uncoated

    Series 18 – Long Series
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 10.0 WELDON LONG COARSE ROUGH E/MILL-TICN

    SwissTech HSS-Co 8% Weldon Shank Coarse Pitch Ripper Cutters: Series 18, Long – TiCN Coated

    Series 18 – Long Series, TiCN Coated
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 10.0 WELDON LONG FINE ROUGH E/MILL-8% CO

    Swisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 26, Long – Uncoated

    Series 26 – Long Series
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 10.0 WELDON LONG FINE ROUGH E/MILL-TICN-8% CO

    Swisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 26, Long – TiCN Coated

    Series 26 – Long Series, TiCN Coated
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 10.0 WELDON LONG FINE ROUGH END MILL-TiALN-8% CO

    Swisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 26, Long – TiALN Coated

    Series 26 – Long Series, TiALN Coated
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 10mm HSS-COBALT L/S SC/SH KNUCKLE RIPPER

    Sherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Long Series – Inch

    Long Series Type K432T

    Knuckle Form
    For use when high metal removal rates area required. Bright finish. Flute type: 25° spiral, oughing truncated. Shank diameter to js14.

    Metric Tolerances
    Diameter ± 0.127mm

    Read more
  • 10mm HSS-COBALT PM L/S WELDON F/P RIPPER TiALN

    Swisstech Weldon Shank HSS-E PM TiALN Coated Fine Pitch Ripper Cutters: Series 96, Long

    Series 96 – Long Series
    Dimensions to DIN 844. Centre cutting. Shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.

    Read more
  • 11mm HSS-COBALT L/S SC/SH KNUCKLE RIPPER

    Sherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Long Series – Inch

    Long Series Type K432T

    Knuckle Form
    For use when high metal removal rates area required. Bright finish. Flute type: 25° spiral, oughing truncated. Shank diameter to js14.

    Metric Tolerances
    Diameter ± 0.127mm

    Read more
  • 12.0 WELDON LONG COARSE ROUGH E/MILL-8% CO

    SwissTech HSS-Co 8% Weldon Shank Coarse Pitch Ripper Cutters: Series 18, Long – Uncoated

    Series 18 – Long Series
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 12.0 WELDON LONG COARSE ROUGH E/MILL-TICN

    SwissTech HSS-Co 8% Weldon Shank Coarse Pitch Ripper Cutters: Series 18, Long – TiCN Coated

    Series 18 – Long Series, TiCN Coated
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 12.0 WELDON LONG FINE ROUGH E/MILL-8% CO

    Swisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 26, Long – Uncoated

    Series 26 – Long Series
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 12.0 WELDON LONG FINE ROUGH E/MILL-TICN-8% CO

    Swisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 26, Long – TiCN Coated

    Series 26 – Long Series, TiCN Coated
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 12.0 WELDON LONG FINE ROUGH END MILL-TiALN-8% CO

    Swisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 26, Long – TiALN Coated

    Series 26 – Long Series, TiALN Coated
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 12mm HSS-COBALT L/S SC/SH KNUCKLE RIPPER

    Sherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Long Series – Inch

    Long Series Type K432T

    Knuckle Form
    For use when high metal removal rates area required. Bright finish. Flute type: 25° spiral, oughing truncated. Shank diameter to js14.

    Metric Tolerances
    Diameter ± 0.127mm

    Read more
  • 12mm HSS-COBALT PM L/S WELDON F/P RIPPER TiALN

    Swisstech Weldon Shank HSS-E PM TiALN Coated Fine Pitch Ripper Cutters: Series 96, Long

    Series 96 – Long Series
    Dimensions to DIN 844. Centre cutting. Shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.

    Read more
  • 16.0 WELDON LONG COARSE ROUGH E/MILL-8% CO

    SwissTech HSS-Co 8% Weldon Shank Coarse Pitch Ripper Cutters: Series 18, Long – Uncoated

    Series 18 – Long Series
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop