Category: KC3 Milling Cutters

KC3 Milling Cutters

Showing 1–16 of 80 results

  • 1.0mm TICN KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    With a micro hardness of 3000HV and a maximum working temperature of 400°C, giving them a better resistance to abrasive wear than TiN coated cutters.

    Short series

    Long Series

    Read more
  • 1.0mm TIN KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    TiN-Coated to allow elevated cutting speeds and help to extend tool life.

    Short Series

    Long Series

    Read more
  • 1.5mm HSS-COBALT KC3 THROWAWAY CUTTER
    Rp139.000

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    For high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request).

    Short series

    Read more
  • 1.5mm HSS-COBALT L/S KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    Long Series
    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

    Read more
  • 1.5mm TICN KC3 THROWAWAY CUTTER
    Rp245.000

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    With a micro hardness of 3000HV and a maximum working temperature of 400°C, giving them a better resistance to abrasive wear than TiN coated cutters.

    Short series

    Long Series

    Read more
  • 1.5mm TICN L/S KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    Long Series

    Read more
  • 1.5mm TIN KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    TiN-Coated to allow elevated cutting speeds and help to extend tool life.

    Short Series

    Long Series

    Read more
  • 1.5mm TIN L/S KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    Long Series

    Read more
  • 1/16″ HSS-COBALT KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Inch – Uncoated

    Short Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”,

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 1/16″ HSS-COBALT L/S KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Inch – Uncoated

    Long Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”.

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 1/4″ HSS-COBALT KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Inch – Uncoated

    Short Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”,

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 1/4″ HSS-COBALT L/S KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Inch – Uncoated

    Long Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”.

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 1/8″ HSS-COBALT KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Inch – Uncoated

    Short Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”,

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 1/8″ HSS-COBALT L/S KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Inch – Uncoated

    Long Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”.

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 10.0m HSS-COBALT L/S KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    Long Series
    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

    Read more
  • 10mm HSS-COBALT KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    For high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request).

    Short series

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop