Showing all 12 results

• 

  1″ DRIVE H/D IN-LINE IMPACT WRENCH

  Kobe™ Heavy-Duty In-Line Air Impact Wrench – 1″

  1” square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.
  Free speed: 3,300rpm.
  Final drive: 1” (25mm) hex.
  Working torque: 2,030Nm (1500lb/ft).
  Maximum torque: 2,300Nm (1700lb/ft).
  Safe working pressure: 6.2bar/90psi.
  Air inlet thread: 1/2” NPT.
  Minimum air hose size (ID): 1/2” (13mm).
  Air pressure: 6.3bar/90psi.
  Air consumption: 7.0cfm.
  Sound pressure level: 87dBA.
  Vibration level: 5.9m/s2.
  Overall length: 500mm.

  Add to cart
• 

  1″ DRIVE H/D PISTOL GRIPAIR IMPACT WRENCH

  Kobe™ Pistol Grip Air Impact Wrench – 1″

  IWP100-X
  Suitable for industrial and commercial production and assembly applications. Front or rear mounting spring balance loop. Forward/reverse switch and three position power regulator. Forward facing exhaust. Oiling points for daily maintenance.
  Free speed: 3,400rpm.
  Final drive: 1” (25mm) hex.
  Working torque: 2,170Nm (1600lb/ft).
  Maximum torque: 2,440Nm (1800lb/ft).
  Air inlet thread: 1/2” NPT.
  Minimum air hose size (ID): 1/2” (13mm).
  Air pressure: 6.3bar/90psi.
  Air consumption: 0.8cfm.
  Sound pressure level: 87dBA.
  Vibration level: 5.9m/s2.
  Overall length: 295mm.

  Read more
• 

  3/8″ IMPACT WRENCH

  Impact Wrench G7321

  G7321
  Suitable for light workshop and garage use. Twin hammer mechanism with a 4 point adjustable air (speed) forward/reverse speed regulator. Ergonomic and comfortable handle grip with vibration dampening a fixed inlet and exhaust. One finger stop/start trigger operation. Downward facing external exhaust in handle.
  Square drive size: 3/8” (10mm).
  Free speed: 10,100rpm.
  Forward:
  position 1: 8,000rpm,
  position 2: 9,100rpm,
  position 3: 10,100rpm.
  Reverse:
  10,200rpm.
  Maximum torque: 393Nm (290ft/lbs).
  Working torque: 339Nm (250ft/lbs).
  Recommended air pressure: 6.2bar (90psi).
  Air consumption: 3.4cfm*
  Air inlet thread: 1/4” NPT.
  Minimum air hose size (ID): 10mm (3/8”).
  Overall length: 160mm.

  Read more
• 

  B7444 1/2″ IMPACT WRENCHCOMPOSITE HOUSING

  Kobe™ Impact Wrench – 1/2″

  B7444
  Suitable for production and assembly applications. Twin hammer mechanism. 1/2” square drive. Three position dial style speed regulator. Forward/reverse selection. Ergonomic and comfortable handle grip. Fixed inlet and exhaust.
  Forward: position 1: 4000rpm, position 2: 5000rpm, position 3: 7000rpm.
  Reverse: position 1: 3000rpm, position 2: 5000rpm, position 3: 7000rpm.
  Collet size: 1/2” (13mm).
  Free speed: 7,000rpm.
  Maximum torque: 813Nm (600ft/lbs).
  Recommended air pressure: 6.2bar/90psi.
  Air consumption: 4cfm* (113ltr/min).
  Noise Level: 83dBA
  Sound Power: 90dBA
  Vibration: 6.8m/s2
  Air inlet thread: 1/4” NPT.
  Minimum air hose size (ID): 10mm (3/8”).
  Overall length: 183mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  FWR 1/2″ RATCHET WRENCH

  Kobe™ Speed Ratchets

  FSR375
  3/8” square drive. Working torque range: 5 – 20ft.lbs (7 – 27Nm). Overall length: 205mm. Free speed: 200rpm.
  Noise Level: 84dBA. Sound Power: 88dBA. Vibration: 1.8m/s2.
  FSR500
  1/2” square drive. Working torque range: 10 – 50ft.lbs (14 – 68Nm). Overall length: 265mm. Free speed: 150rpm.
  Noise Level: 87dBA. Sound Power: 87dBA. Vibration: 2.6m/s2.

  Suitable for the removal and installation of threaded fasteners when doing automotive and light assembly work. Reversible hardened steel square drive. Rubber handle provides grip and operator comfort with reduced hand chill. Three planetary gears for longer life and smoother running. Rubber cover protects the ratchet head and the workpiece. Short body length allows access into hard to reach areas. Low profile teasing throttle for precise speed control. Rotating rear exhaust with baffle for reduced noise. Rotating air inlet to prevent the air hose tangling. Adjustable air regulator.
  Air inlet thread: 1/4” NPT.
  Minimum air hose size (ID): 10mm (3/8”).
  Air pressure: 6.2bar/90psi.
  Air consumption: 4cfm* (113ltr/min).

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  FWR 3/8″ RATCHET WRENCH

  Kobe™ Speed Ratchets

  FSR375
  3/8” square drive. Working torque range: 5 – 20ft.lbs (7 – 27Nm). Overall length: 205mm. Free speed: 200rpm.
  Noise Level: 84dBA. Sound Power: 88dBA. Vibration: 1.8m/s2.
  FSR500
  1/2” square drive. Working torque range: 10 – 50ft.lbs (14 – 68Nm). Overall length: 265mm. Free speed: 150rpm.
  Noise Level: 87dBA. Sound Power: 87dBA. Vibration: 2.6m/s2.

  Suitable for the removal and installation of threaded fasteners when doing automotive and light assembly work. Reversible hardened steel square drive. Rubber handle provides grip and operator comfort with reduced hand chill. Three planetary gears for longer life and smoother running. Rubber cover protects the ratchet head and the workpiece. Short body length allows access into hard to reach areas. Low profile teasing throttle for precise speed control. Rotating rear exhaust with baffle for reduced noise. Rotating air inlet to prevent the air hose tangling. Adjustable air regulator.
  Air inlet thread: 1/4” NPT.
  Minimum air hose size (ID): 10mm (3/8”).
  Air pressure: 6.2bar/90psi.
  Air consumption: 4cfm* (113ltr/min).

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  IW500 1/2″ AIR IMPACT WRENCH

  Kobe™ Impact Wrench

  IW500
  One piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4” NPT air inlet thread for 10mm air hose, 90psi air pressure, 300ft/lbs torque, 4cfm* air consumption, 16mm bolt capacity.
  Noise Level: 88dBA
  Sound Power: N/A dBA
  Vibration: 4.2m/s
  Overall length: 191mm.

  Read more
• 

  IW750 3/4″ AIR IMPACT WRENCH

  Kobe™ Impact Wrench – 3/4″

  IW750
  One-piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4” NPT air inlet thread for 10mm air hose, 25mm bolt capacity. 90psi air pressure,
  7.5cfm* air consumption. 500ft/lbs torque.
  Noise Level: 83dBA
  Sound Power: N/A dBA
  Vibration: 0.449m/s
  Overall length: 245mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  IWS500 1/2″ IMPACT WRENCH KIT

  Kobe™ Impact Wrench Kit – 1/2″

  IWS500
  Kit supplied complete in robust blow-moulded case.
  Includes: 1/2” impact wrench IW500. 10 metric sockets: 9, 10, 11, 12, 13, 14, 17, 22, 24 and 27mm. Threaded tailpiece, in-line mini-oiler and oil bottle. One piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4” NPT air inlet thread for 10mm air hose, 90psi air pressure, 300ft/lbs torque, 4cfm* air consumption, 16mm bolt capacity.
  Noise Level: 93dBA
  Sound Power: N/A dBA
  Vibration: 1.21m/s
  Overall length: 191mm.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  R7722 1/4″ SPEED RATCHET

  Kobe™ Speed Ratchet 1/4” Square Drive

  R7722
  Suitable for the removal and installation of threaded fasteners. Reversible hardened steel 1/4” square drive. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.
  Drive size: 1/4” (6mm). Free speed: 200rpm.
  Recommended air pressure: 6.2bar/90psi.
  Air consumption: 4cfm* (113ltr/min).
  Noise Level: 80dBA
  Sound Power: 88dBA
  Vibration: 1.8m/s2
  Working torque range: 7 ~ 27nm (5 ~ 20ft/lbs).
  Air inlet thread: 1/4” NPT.
  Minimum air hose size (ID): 10mm (3/8”).
  Overall length: 200mm.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  SR375 3/8″ SQ. DR. RATCHET SPEED WRENCH

  Kobe™ Speed Ratchets

  SR375 3/8″ square drive, 10mm bolt capacity.
  Noise Level: 89dBA
  Sound Power: 96dBA
  Vibration: 4.0m/s

  SR500 1/2″ square drive, 13mm bolt capacity.
  Noise Level: 89dBA
  Sound Power: 89dBA
  Vibration: 4.0m/s

  Both:
  Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work, front exhaust.
  Free speed: 150rpm.
  Air inlet thread: 1/4” NPT.
  Minimum air hose size (ID): 10mm (3/8”).
  Air pressure: 6.2bar/90psi.
  Air consumption: 4cfm* (113ltr/m).
  Torque: 50ft/lbs.
  Overall length: 255mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  SR500 1/2″ SQ. DR. RATCHET SPEED WRENCH

  Kobe™ Speed Ratchets

  SR375 3/8″ square drive, 10mm bolt capacity.
  Noise Level: 89dBA
  Sound Power: 96dBA
  Vibration: 4.0m/s

  SR500 1/2″ square drive, 13mm bolt capacity.
  Noise Level: 89dBA
  Sound Power: 89dBA
  Vibration: 4.0m/s

  Both:
  Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work, front exhaust.
  Free speed: 150rpm.
  Air inlet thread: 1/4” NPT.
  Minimum air hose size (ID): 10mm (3/8”).
  Air pressure: 6.2bar/90psi.
  Air consumption: 4cfm* (113ltr/m).
  Torque: 50ft/lbs.
  Overall length: 255mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart