Relaunch Promotion
Product Showcase
Category: Carbide End Mills - Short Series
Carbide End Mills - Short Series
Showing 1–16 of 37 results
-
10.0mm ST/SH SHORT 4FL END MILL Q-COATRead moreCarbide Plain Shank End Mills 4 Flute – Series 66 – Short Series – EMQ-4PS Carbide Q-Coat
Series 66 – Short Series
Dimensions to DIN 844. Centre cutting. To Manufacturers standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat.‘Q-Coat’ Coating has been specifically developed to give carbide cutters the ‘edge’ when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.
-
10.0mm ST/SH SHORT CARBIDE END MILLRead moreCarbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMC-4PS CarbideCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMC-4PS Carbide -
10.0mm ST/SH SHORT CARBIDE END MILL – TICNRead moreCarbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMT-4PS TiCN CoatedCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMT-4PS TiCN Coated -
12.0mm ST/SH SHORT 4FL END MILL Q-COATRead more
Carbide Plain Shank End Mills 4 Flute – Series 66 – Short Series – EMQ-4PS Carbide Q-Coat
Series 66 – Short Series
Dimensions to DIN 844. Centre cutting. To Manufacturers standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat.‘Q-Coat’ Coating has been specifically developed to give carbide cutters the ‘edge’ when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.
-
12.0mm ST/SH SHORT CARBIDE END MILLRead more
Carbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMC-4PS CarbideCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMC-4PS Carbide -
12.0mm ST/SH SHORT CARBIDE END MILL – TICNRead more
Carbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMT-4PS TiCN CoatedCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMT-4PS TiCN Coated -
14.0mm ST/SH SHORT CARBIDE END MILLRead more
Carbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMC-4PS CarbideCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMC-4PS Carbide -
14.0mm ST/SH SHORT CARBIDE END MILL – TICNRead more
Carbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMT-4PS TiCN CoatedCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMT-4PS TiCN Coated -
16.0mm ST/SH SHORT 4FL END MILL Q-COATRead more
Carbide Plain Shank End Mills 4 Flute – Series 66 – Short Series – EMQ-4PS Carbide Q-Coat
Series 66 – Short Series
Dimensions to DIN 844. Centre cutting. To Manufacturers standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat.‘Q-Coat’ Coating has been specifically developed to give carbide cutters the ‘edge’ when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.
-
16.0mm ST/SH SHORT CARBIDE END MILLRead more
Carbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMC-4PS CarbideCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMC-4PS Carbide -
16.0mm ST/SH SHORT CARBIDE END MILL – TICNRead more
Carbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMT-4PS TiCN CoatedCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMT-4PS TiCN Coated -
2.0mm ST/SH SHORT 4FL END MILL Q-COATRead more
Carbide Plain Shank End Mills 4 Flute – Series 66 – Short Series – EMQ-4PS Carbide Q-Coat
Series 66 – Short Series
Dimensions to DIN 844. Centre cutting. To Manufacturers standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat.‘Q-Coat’ Coating has been specifically developed to give carbide cutters the ‘edge’ when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.
-
2.0mm ST/SH SHORT CARBIDE END MILLRead more
Carbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMC-4PS CarbideCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMC-4PS Carbide -
2.0mm ST/SH SHORT CARBIDE END MILL – TICNRead more
Carbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMT-4PS TiCN CoatedCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMT-4PS TiCN Coated -
2.5mm ST/SH SHORT CARBIDE END MILLRead more
Carbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMC-4PS CarbideCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMC-4PS Carbide -
20.0mm ST/SH SHORT 4FL END MILL Q-COATRead more
Carbide Plain Shank End Mills 4 Flute – Series 66 – Short Series – EMQ-4PS Carbide Q-Coat
Series 66 – Short Series
Dimensions to DIN 844. Centre cutting. To Manufacturers standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat.‘Q-Coat’ Coating has been specifically developed to give carbide cutters the ‘edge’ when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.