Relaunch Promotion
Product Showcase
Category: HSS-Co. End Mills - Long Series
HSS-Co. End Mills - Long Series
Showing 1–16 of 64 results
-
10.0 SCR LONG END MILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 37, Long – Uncoated
Series 37 – Long Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 WELDON LONG END MILL-8% CORead moreSwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 10, Long – Uncoated
Series 10 – Long Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 WELDON LONG END MILL-TiALN-8% CORead moreSwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 10, Long – TiALN Coated
Series 10 – Long Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 WELDON LONG END MILL-TICN-8% CORead more
SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 10, Long – TiCN Coated
Series 10 – Long Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10mm HSS-COBALT L/S SC/SH END MILLRead moreSherwood HSS-Co 5% Threaded Shank End Mills 4, 6 & 8 Flute, Long Series – Metric
Long Series Type E431T
Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000. -
10mmx95mm O/A HSS-COBALT4FL PL/SH END MILLRp484.000Read moreSherwood HSS-Co Plain Shank Milling Cutters 4 Flute, Long Series – Metric
Long Series
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
12.0 SCR LONG END MILL-8% CORead more
SwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 37, Long – Uncoated
Series 37 – Long Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
12.0 SCR LONG END MILL-TiALN-8% CORead moreSwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 37, Long – TiALN Coated
Series 37 – Long Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
12.0 SCR LONG END MILL-TICN-8% CORead more
SwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 37, Long – TiCN Coated
Series 37 – Long Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
12.0 WELDON LONG END MILL-8% CORead more
SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 10, Long – Uncoated
Series 10 – Long Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
12.0 WELDON LONG END MILL-TiALN-8% CORead more
SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 10, Long – TiALN Coated
Series 10 – Long Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
12.0 WELDON LONG END MILL-TICN-8% CORead more
SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 10, Long – TiCN Coated
Series 10 – Long Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
12mm HSS-COBALT L/S SC/SH END MILLRead more
Sherwood HSS-Co 5% Threaded Shank End Mills 4, 6 & 8 Flute, Long Series – Metric
Long Series Type E431T
Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000. -
12mmx110mm O/A HSS-COBALT 4FL PL/SH END MILLRp643.000Read more
Sherwood HSS-Co Plain Shank Milling Cutters 4 Flute, Long Series – Metric
Long Series
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
14.0 WELDON LONG END MILL-8% CORead more
SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 10, Long – Uncoated
Series 10 – Long Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
14.0 WELDON LONG END MILL-TiALN-8% CORead more
SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 10, Long – TiALN Coated
Series 10 – Long Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).