Archives: Products

Showing 7841–7856 of 23773 results

2mm HSS L/S SC/SH SLOT DRILL

Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

Long Series 5230T
Used for milling keyways and slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

*Based on BS122: Part 4: 1980 though specific diameter is not included.

Read more
2mm HSS PLAIN SHANK CORNER ROUNDING CUTTER
Rp669.000

Sherwood HSS Plain Shank Corner Rounding Cutters

Designed to produce convex corner radii. For milling structural, carburising and heat treated steel up to 900N/mm2. Manufactured to works standards. 5Â° RH Flutes. Bright finish, straight helix. Radii tolerance: Â± 0.005â.

Read more
2mm HSS SC/SH B/N SLOT DRILL

Sherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric

Short Series Type B210T
Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
2mm HSS SC/SH CORNER ROUNDING CUTTER
Rp637.000

Sherwood HSS Threaded Shank Corner Rounding Cutters – Metric

Designed to produce convex corner radii. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to works standards. 5Â° RH Flutes.
Bright finish, straight helix. Radii tolerance: Â± 0.005â. Shank to DIN 1835/D.

Read more
2mm HSS SC/SH END MILL

Sherwood HSS Threaded Shank End Mills Multi Flute – Metric

Short Series E410T
Used for profile milling and producing open slots. Bright finish. Flute type : 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.

Read more
2mm HSS SC/SH SLOT DRILL

Sherwood HSS Threaded Shank Slot Drills 2 Flute – Metric

Short Series S210T – Metric
Used for milling keyways and slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
2mm HSS-COBALT B/N KC3 THROWAWAY CUTTER

Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

Ball Nose – Metric
Long Series – Metric

Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

*Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

Metric Tolerances:
Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020.

Read more
2mm HSS-COBALT KC3 THROWAWAY CUTTER
Rp139.000

HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

For high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request).

Short series

Read more
2mm HSS-COBALT L/S KC3 THROWAWAY CUTTER
Rp157.000

HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

Long Series
Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

Read more
2mm HSS-COBALT PM 3FL WELDON END MILL P/POWER

SwissTech HSS-E PM Coated 3 Flute End Mills: Series 93, Regular – Peak Power Coated

Series 93 – Regular
Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6. Dimensions to DIN 844.

The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds.

Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity.

These cutters are further enhanced by the SwissTech Peak Power coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.

Read more
2mm HSS-COBALT SC/SH END MILL

Sherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Metric

Regular Series Type E411T
Used for profile milling and producing open slots. Bright finish. Flute type : 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

Read more
2mm HSS-COBALT SC/SH SLOT DRILL

Sherwood HSS-Co 5% Threaded Shank Slot Drills 2 Flute – Metric

Short Series – Metric
Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
2mm SPACERS (PK-250)

Tile Spacers

Average pack quantity: 250.

Read more
2mm SQUARE x 300mm KEY STEEL

Kennedy Industrial Key Steel – Square: Metric

Square â Metric
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request.

Read more
2mm STANDARD INSERTED PIN PUNCH

Kennedy Standard Length Inserted Pin Punches

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

Read more
2MT 1/2″x20TPI DRILL CHUCK ARBOR

Kennedy Industrial Drill Chuck Arbors – Morse Taper Drive to Threaded

Morse Taper Drive to Threaded
Precision machined, fully hardened and ground to give maximum surface contact.

Add to cart