Archives: Products
Showing 7969–7984 of 23773 results
-
3.0-2.0 ER16 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
3.0-2.0 ER20 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
3.0-2.0 ER25 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
3.0-2.0 ER32 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
3.0-3.9mm JIS CHUCK TYPE TAP WRENCH-LONGRead moreKennedy Chuck Type Tap Wrench Set – Japanese Type
Japanese Type
Used in Hand Tapping operations and provide the reach and leverage needed for accurate tapping. Heavy duty ductile steel body with knurled chuck, stepped chuck jaws and four point clamping increase the range of tap sizes which can be used in the wrench fitted with a fixed T-bar. Individually boxed. -
3.0-5.0mm UK CHUCK TYPE TAP WRENCH-LONGRead moreKennedy Chuck Style Tap Wrenches
English Type
Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, four equalising jaws to hold the tap true and sliding T-bar which can be used when tapping against a shoulder or other obstructions. Individually boxed. -
3.0-5.0mm UK CHUCK TYPE TAP WRENCH-STANDARDRead moreKennedy Chuck Style Tap Wrenches
English Type
Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, four equalising jaws to hold the tap true and sliding T-bar which can be used when tapping against a shoulder or other obstructions. Individually boxed. -
3.0-6.0mm RATCHETING CHUCK TYPE TAP WRENCHRp352.000Add to cartKennedy Ratchet Type Tap Wrenches
Manufactured from hardened and tempered steel, with chrome plated high polish finish.
Switchable between forward and reverse coupled with the multi-positional sliding T-bar makes this tap wrench ideal for use in confined spaces. Individually boxed. -
3.00mm 90DEG HSS-COBALT S/S SPOTTING DRILLRp56.000Read moreSherwood HSS-E Spotting Drills – 90° Point
90° Point – Series C520
Special drill for accurate and fast spotting on NC machines, jig drills and other capital-intensive boring machines. For countersinking and chamfering of tapping holes in one operation. Only suitable for shallow depth drilling. -
3.00mm BLUE FORK TERMINAL (PK-100)Read moreKennedy Standard Industrial Terminals: Fork Connector Terminals
Fork Connector Terminals
Pack quantity: 100.
Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve. -
3.00mm BLUE RING TERMINAL (PK-100)Read moreKennedy Standard Industrial Terminals: Fork Connector Terminals
Fork Connector Terminals
Pack quantity: 100.
Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve. -
3.00mm CARBIDE S/S JOBBER DRILLRp177.000Read moreSolid Carbide Jobber Drills
General purpose drills for drilling a wide variety of metallic and non-metallic materials.
Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce.
Manufacturing Standard: BS 328, DIN 338. -
3.00mm CARBIDE S/S STUB DRILLRp151.000Read moreSolid Carbide Stub Drills – Metric
Metric
For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
Manufactured to Works Standard. -
3.00mm DIA COBALT DRILL FOR STAINLESS STEELRp27.000Add to cartHSS-Co Straight Shank Drills
Metric
Heavy duty drill made of 8% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm2, very hard bronze, stainless steels as well as heat and acid resistant steels. Point angle: 135°. Helix angle: normal. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Supply unit. All diameters – 1 pce. Manufacturing Standard: BS 328, DIN 338B. -
3.00mm DIA HSS S/S R-F JOBBER DRILLRp42.000Add to cartSenator HSS Roll Forged Jobber Drills – Metric
Metric
Senator jobber drills are roll forged from HSS, ensuring uninterrupted grain structure. This provides exceptional strength and durability. Tips are ground for effective cutting. Suitable for drilling wood, plastic, carbon and plain steels where the cutting efficiency of ground flute is not required. Manufactured to BS 328 : Part 1 : 1986 & DIN 338 Type N. -
3.00mm ER11 SINGLE ANGLECOLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499.