Archives: Products
Showing 15073–15088 of 23773 results
-
8x19mm CYL PLAIN END C/B BURR CUT 9Read moreYork Carbide Burrs – Cylindrical Plain End
All sizes are nominal.
Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
8x19mm FLAME SHAPE BURR DOUBLE CUTRead moreYork Carbide Burrs – Flame Shape
Flame Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
8x19mm FLAME SHAPE C/B BURR CUT 9Read moreYork Carbide Burrs – Flame Shape
Flame Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
8×2.0mm ST/SH 2FL C/RADIUS SLOT DRILL Q-COATRead moreSwissTech Carbide Plain Shank Corner Radius Slot Drills 2 Flute
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6.
SCQ-2PR Carbide Q-Coat.Series 85 Regular Series
Dimensions to DIN 844. -
8×2.0mm ST/SH 4FL C/RADIUS END MILL Q-COATRead moreCarbide Plain Shank Corner Radius End Mills 4 Flute
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6
ECQ-4PR Carbide Q-Coat.Series 86 Regular Length
-
8×2.1/2″ SILVER-TT POZI CSK WOODSCREW BZP (200)Read moreMatlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
8×2.1/4″ SILVER-TT POZI CSK WOODSCREW BZP (200)Read more
Matlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
8×2″ SILVER-TT POZI CSK WOODSCREW BZP (200)Read more
Matlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
8x200mm CABINET HANDLE SCREWDRIVERRead moreKennedy Cabinet Screwdrivers – Flared Tip, Round Blade
Traditional design cabinet screwdrivers with matt grey high impact plastic handles to ensure a firm yet comfortable grip allowing constant use, giving maximum torque. Chrome alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.
Flared Tip, Round Blade
Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head. -
8x200mm ENGINEERS SCREWDRIVERRead moreKennedy Engineersâ & Electriciansâ Screwdrivers: Flared Tip, Round Blade
With a traditional âflutedâ design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.
Flared Tip, Round Blade
Same as the parallel tip.
(Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.) -
8x200mm FLAT HI-GRIP SCREWDRIVERRead moreKennedy âHi-Gripâ Screwdrivers – Flared Tip, Round Blade
Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.
*Flat blades have hexagon bolster to allow higher torque to be applied via a spanner.Flared Tip, Round Blade
Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head. -
8x200mm FLAT PRO-TORQ SCREWDRIVERRead moreKennedy Pro-Torq Screwdrivers – Flared Tip, Round Blade
Chrome vanadium steel blades with magnetic tips. Fitted with a unique dual grip triangular handle which has been designed for improved user comfort, allowing more torque to be applied. With convenient hanging hole in the handle for storage.
Flared Tip, Round Blade
To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head. -
8x200mm POUND THRU’ HI-GRIP SCREWDRIVERRead moreKennedy âHi-Gripâ Pound Thruâ Screwdrivers – Flared Tip, Hexagon Blade
Through blade screwdriver with chrome vanadium steel blades and striking heads, suitable for striking with a hammer to free up seized screws. Fully hardened magnetic tips. Comfortable moulded grip. Hexagon blades.
Flared Tip, Round Blade
Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head. -
8x200mm SQ BLADE ENGINEERS SCREWDRIVERRead moreKennedy Engineersâ & Electriciansâ Screwdrivers: Flared Tip, Square Blade
With a traditional âflutedâ design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.
Flared Tip, Square Blade
Square bladed screwdrivers can be gripped in a spanner or locking wrench to allow greater torque to be applied from the side rather than from directly above the screwdriver. -
8x200mm SQUARE BLADE PRO-TORQ SCREWDRIVERRead moreKennedy Pro-Torq Screwdrivers – Flared Tip, Square Blade
Chrome vanadium steel blades with magnetic tips. Fitted with a unique dual grip triangular handle which has been designed for improved user comfort, allowing more torque to be applied. With convenient hanging hole in the handle for storage.
Flared Tip, Square Blade
Square bladed screwdrivers can be gripped in a spanner or locking wrench to allow greater torque to be applied from the side rather than from directly above the screwdriver. -
8x20mm CYL. CARBIDE BALL NOSE BURR CUT 9Read moreKennedy Carbide Burrs – Cylindrical Ball Nosed
Cylindrical Ball Nosed
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.