Archives: Products
Showing 15105–15120 of 23773 results
-
8×3″ SILVER-TT POZI CSK WOODSCREW BZP (200)Read moreMatlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
8×3/4″ A2 ST/ST PIN HEX BUTTON SELF TAPPERRead moreTamper Hex Self-Tapping Security Screws
A2 Stainless Steel – Button Head
-
8×3/4″ A2 ST/ST PIN HEX CSK SELF TAPPERRead moreHex Self-Tapping Security Screws
A2 Stainless Steel – Countersunk
-
8×3/4″ A2 ST/ST TAMPER TORX BUTTON SELF TAPPERRead moreTamper Torx Self-Tapping Security Screws
A2 Stainless Steel – Button Head
-
8×3/4″ A2 ST/ST TAMPER TORX CSK SELF TAPPERRead moreTamper Torx Self-Tapping Security Screws
A2 Stainless Steel – Countersunk
-
8×3/4″ SILVER-TT POZI CSK WOODSCREW BZP (200)Read more
Matlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
8x30mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
8x30mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
8x32mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
8x32mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
8x35mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
8x36mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
8x36mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
8x40mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
8x40mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
8x45mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.