Archives: Products
Showing 15089–15104 of 23773 results
-
8x20mm CYL. CARBIDE END CUT BURR CUT 9Read moreKennedy Carbide Burrs – Cylindrical-End Cutting
Cylindrical-End Cutting
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
8x20mm CYL. CARBIDE PLAIN END BURR CUT 9Read moreKennedy Carbide Burrs – Cylindrical Plain End
Cylindrical Plain End
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
8x20mm FLAME SHAPE CARBIDE BURR CUT 9Read moreKennedy Carbide Burrs – Flame Shape
Flame Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
8x20mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
8x20mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
8×21 ULTRA COMPACT BINOCULARSRead moreRutland Ultra Compact Binoculars
CP0821
The ultra compact design makes them ideal for use when storage space is at a premium. The high quality porro prism coated lenses are housed in a tough polyurethane body which is comfortable to hold. The diopter adjustment is easy to use and improves the image clarity and sharpness. Simple yet accurate focusing is achieved using fingertip control of the central focusing wheel. Supplied complete with case, neck strap and cleaning cloth. -
8x22mm CON. 14 DEG ANGLE BURR DOUBLE CUTRead moreYork Carbide Burrs – Conical 14°
Conical 14°
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
8x22mm CONICAL 14DEG C/B BURR CUT 9Read moreYork Carbide Burrs – Conical 14°
Conical 14°
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
8x22mm CONICAL 14DEG. CARBIDE BURR CUT 9Read moreKennedy Carbide Burrs – Conical 14°
Conical 14°
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
8x24mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
8x24mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
8x25mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
8x25mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
8x28mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
8x28mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
8×3.15mm CARBIDE CENTRE DRILLRp306.000Read moreCarbide Centre Drills – Metric
Metric Series
Used to produce 60° centres in components for subsequent manufacturing operations to be carried out. Tool life is extended and difficult materials may be drilled.
60° included angle. 118° drill point. Manufactured to BS 328.Tolerances:
Cutting diameter +0.0005″
Shank diameter +0.0010″