Archives: Products
Showing 14689–14704 of 23773 results
-
8″ (200mm) TAPER SAW REGULAR SECOND CUT FILERp64.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Taper Saw
Taper Saw
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Taper Saw – Edges taper towards point. For filing and sharpening hand saws. Points are left uncut. Taper Saw Files are used for filing every type of handsaw which have 60° angle teeth. These files are single cut with edges that are set and cut for filing the gullet between the saw teeth. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) THREE SQUARE BASTARD ENGINEERS FILERp61.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
8″ (200mm) THREE SQUARE SECOND ENGINEERS FILERp64.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
8″ (200mm) THREE SQUARE SMOOTH ENGINEERS FILERp67.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
8″ (200mm) WARDING BASTARD ENGINEERS FILERp60.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) WARDING SECOND ENGINEERS FILERp67.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) WARDING SMOOTH ENGINEERS FILERp69.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ 2-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Pullers – 2 Jaw
Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external
applications.
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what âspreadâ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed. -
8″ 2/3-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Puller – Industrial Kits
2 & 3 Jaw Reversible/Double-Ended/Adjustable
Manufactured from chrome vanadium steel. Each kit contains the components to assemble a 2 or 3 jaw external or internal puller. The legs can be set at two different height positions. -
8″ 3-JAW DOUBLE ENDED MECHANICAL PULLERAdd to cartKennedy Mechanical Pullers – 3-Jaw
3-Jaw Industrial Reversible Double-Ended Adjustable
Manufactured from drop forged chrome vanadium steel. -
8″ ALL METAL SIDEBENT SHEARSRead moreIndustrial Scissors
Sidebent Shears
Stainless steel blades, large loop comfortable handles. For trimming. -
8″ ALUMINIUM PIPE WRENCHRead moreKennedy Aluminium Pipe Wrenches
Lightweight aluminium alloy handles. As robust as heavy-duty cast iron wrenches.
-
8″ ANVIL PRUNING SHEARSRead moreRutland Pruning Shears
Spring loaded, with contoured grips and blade locking mechanism.
Overall length: 200mm.Anvil Action
The anvil secateur is designed for cutting old, hard and deadwood. The anvil supports a wide area of the branch while the sharp narrow upper blade is forced through the wood with only a minimum amount of slicing action.Bypass Action
-
8″ BENT EDGE MINI BOLT CLIPPERRead moreKennedy Bolt Cutters
Mini Cutters – Clipper Cut
Manufactured from forged hardened steel, with spring return, allowing single-handed use. Compound action magnifies the pressure applied to the handle. Ensures a concentration of force between the jaws. Non-slip moulded plastic grip. Available with straight and bent jaws. For low tensile materials. Clipper cut. -
8″ BRASS BACK DOVETAIL SAWRead moreKennedy Brass Back Dovetail Saw
Alloy steel blade, tensioned with hardened and ground teeth. Heavy rigid brass back and polished rosewood handle. Securely fastened with two brass screws. 20TPI.
-
8″ BYPASS PRUNING SHEARSRead moreRutland Pruning Shears
Spring loaded, with contoured grips and blade locking mechanism.
Overall length: 200mm.Anvil Action
The anvil secateur is designed for cutting old, hard and deadwood. The anvil supports a wide area of the branch while the sharp narrow upper blade is forced through the wood with only a minimum amount of slicing action.Bypass Action