Archives: Products
Showing 14673–14688 of 23773 results
-
8″ (200mm) HAND SECOND ENGINEERS FILERp54.000Read moreEngineerâs Hand Files
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) HAND SMOOTH ENGINEERS FILERp56.000Add to cartEngineerâs Hand Files
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) KNIFE BASTARD ENGINEERS FILERp102.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Knife
Knife
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Knife – Two equal surfaces, tapered to knife point. For filing and deburring narrow grooves, slits and gear-teeth. Used principally by tool and die makers on work having acute angles. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) KNIFE SECOND ENGINEERS FILERp107.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Knife
Knife
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Knife – Two equal surfaces, tapered to knife point. For filing and deburring narrow grooves, slits and gear-teeth. Used principally by tool and die makers on work having acute angles. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) KNIFE SMOOTH ENGINEERS FILERp111.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Knife
Knife
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Knife – Two equal surfaces, tapered to knife point. For filing and deburring narrow grooves, slits and gear-teeth. Used principally by tool and die makers on work having acute angles. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) MILLSAW 2 R/EHEAVY BLUNT SECOND FILERp82.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Mill Saw
Mill Saw
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Mill Saw – Available with one or two round edges. Parallel edges, both edges cut for filing and sharpening saws. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) PILLAR BASTARD ENGINEERS FILERp69.000Read moreEngineerâs Hand Files
Pillar
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Pillar – Parallel edges, surfaces tapered towards end. Narrow version of hand file. For use where access is restricted. These files are designed for millwrights and mechanics for use in enlarging key-ways, slots, etc., close to the shoulder.Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) PILLAR SECOND ENGINEERS FILERp71.000Read moreEngineerâs Hand Files
Pillar
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Pillar – Parallel edges, surfaces tapered towards end. Narrow version of hand file. For use where access is restricted. These files are designed for millwrights and mechanics for use in enlarging key-ways, slots, etc., close to the shoulder.Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) PILLAR SMOOTH ENGINEERS FILERp72.000Read moreEngineerâs Hand Files
Pillar
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Pillar – Parallel edges, surfaces tapered towards end. Narrow version of hand file. For use where access is restricted. These files are designed for millwrights and mechanics for use in enlarging key-ways, slots, etc., close to the shoulder.Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) ROUND BASTARD ENGINEERS FILERp48.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Round
Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) ROUND SECOND ENGINEERS FILERp51.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Round
Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) ROUND SMOOTH ENGINEERS FILERp53.000Add to cartKennedy Industrial Quality Engineerâs Hand Files – Round
Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) SECOND CUT ENGINEERS FILE SET-8PCERp632.000Read moreEngineerâs Second Cut File Sets
Contents (1 of each): flat, hand, round, half-round three-square and square. Plus two file handles, supplied in PVC wallet. Manufactured to BS498 : 1990 & US Federal Standards.
-
8″ (200mm) SQUARE BASTARD ENGINEERS FILERp50.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Square
Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) SQUARE SECOND ENGINEERS FILERp52.000Add to cartKennedy Industrial Quality Engineerâs Hand Files – Square
Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) SQUARE SMOOTH ENGINEERS FILERp54.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Square
Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard