Archives: Products
Showing 14721–14736 of 23773 results
-
8″ No4 PT SPARK RESISTANT C/POINT SCREWDRIVER Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Screwdrivers – Crosspoint
Crosspoint
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark-resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential. -
8″ PHOSPHATE JAW AND KNURL KITRead moreKennedy Service Kits for Adjustable Wrenches
Consisting of replacement jaw, knurl and pin.
-
8″ PVC COATED SACK TIES (PK-1000)Read moreSack Ties
PVC coated stainless steel sack ties, for use on polypropelene woven sacks and polythene sacks. Made from 1.2mm thick wire. Each tie is looped at each end. Sold in bundles of 1000 ties.
These are easily applied with a sack tying tool sold separatley. -
8″ RED BOX FOR COMBINATION BENCH STONERead moreKennedy Bench Stone Holder
To suit stone size 200 x 50 x 25mm.
Stone not included
-
8″ SATIN-CHROME ADJUSTABLE WRENCHRead moreYamoto Satin Finish Adjustable Wrenches
Slimline tapered parallel jaws for improved access into confined spaces with smooth jaw adjustment and self-locking design prevents the jaws opening unintentionally even when under full load. Graduated laser etched jaws for fast repeatable jaw
setting and adjustment. Manufactured from âIâ beam section chrome vanadium steel for improved strength and rigidity, he jaws are heat treated for extended tool life. Corrosion-resistant satin finish. 22.5° offset head angle for positive torque control.Suitable for marine engineering, automotive, aerospace, agricultural maintenance and assembly applications.Conform to: ISO 6787-1982, ASME B.107.8M-1996, BS 6333-199405, DIN3117-1988, JIS B4604-1976.
Torque Ratings Conform to ISO 6787:1982. -
8″ SECATEURRead moreRutland Bypass Secateurs
Bypass secateurs with a non-clogging telescopic spring and single handed locking mechanism.
Standard Duty
Contoured rubber grip handles. Maximum cutting diameter: 25mm.
Overall length: 200mm.Heavy Duty
Textured rubber grip handles. Overall length: 215mm. -
8″ SPARK RESISTANT DIAGONAL CUTTING PLIERS Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Long Nose Pliers
Long Nose Pliers
With side cutter, serrated jaws and safety grips.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
8″ SPARK RESISTANT LINESMAN PLIERS Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Linesman Pliers
Linesman Pliers
Serrated jaws for gripping nuts, bolts, studs etc. with side cutter and slip guard safety handles.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
8″ SPARK RESISTANT LONG NOSE PLIERS Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Long Nose Pliers
Long Nose Pliers
With side cutter, serrated jaws and safety grips.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
8″ SPRING TYPE DIVIDERS-SOLID NUTRp297.000Add to cartKennedy Spring Dividers
Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.
-
8″ SPRING TYPE INSIDE CALIPER-SOLID NUTRp297.000Read moreKennedy Internal & External Spring Calipers
Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points.
-
8″ SPRING TYPE OUTSIDE CALIPER-SOLID NUTRp297.000Add to cartKennedy Internal & External Spring Calipers
Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points.
-
8″ STEEL BACK GENTS SAWRead moreKennedy Steel Back Gentâs Saws
Suitable for precise flush cutting. Sprung alloy steel blade with rigid steel back, polished rosewood handle and brass ferrule. Blade width: 60mm (2 1/4â).
-
8″ STILLSON WRENCHRead moreKennedy Pipe Wrenches, Standard-Duty
Standard-Duty – For most general-purpose applications.
Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes and nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 1. -
8″ STRAIGHT BLADE TINSNIPRead moreKennedy General-Purpose Tinsnips
Manufactured from drop forged carbon steel with hardened and precision ground blades which can be re-sharpened.
Standard Type
A traditional design, suitable for the general-purpose cutting of sheet metal in a wide range of materials such as copper, aluminium and mild steel. -
8″ STRAIGHT EDGE MINI BOLT CLIPPERRead moreKennedy Bolt Cutters
Mini Cutters – Clipper Cut
Manufactured from forged hardened steel, with spring return, allowing single-handed use. Compound action magnifies the pressure applied to the handle. Ensures a concentration of force between the jaws. Non-slip moulded plastic grip. Available with straight and bent jaws. For low tensile materials. Clipper cut.