Archives: Products
Showing 14657–14672 of 23773 results
-
8.80mm HSS T/S DRILLRead moreHSS Taper Shank Drills, 1 Morse Taper – Metric
To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8.
Manufacturing Standard: DIN 345. -
8.90mm CARBIDE S/S JOBBER DRILLRead moreSolid Carbide Jobber Drills
General purpose drills for drilling a wide variety of metallic and non-metallic materials.
Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce.
Manufacturing Standard: BS 328, DIN 338. -
8.90mm HSS HARDENED/GROUND DRILL BLANKRead moreSherwood HSS Drill Blanks – Metric
Series J400 – Metric
Jobber length blank hardened and ground all over. Accurately ground without back taper.
Diameter tolerance: h8. Manufactured to DIN 338. -
8.90mm HSS S/S BRIGHT JOBBER DRILLRead moreSherwood HSS Jobber Drills Metric, Bright Finish – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
8.90mm HSS S/S JOBBER DRILLRp507.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
8.90mm HSS S/S L/S DRILLRead moreHSS Straight Shank Long Series Drills – Steam Tempered
General purpose drills to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, web thickness: normal, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of f11. Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494.
-
8.90mm HSS S/S STUB DRILLRead moreSherwood HSS General Purpose Stub Drills – Metric Sizes
Series S100 – Metric
General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BSâ328: Part 1: 1986/DIN 1897. -
8″ (200mm) 4-PCE ENGINEERS FILE SETRp323.000Add to cartEngineerâs File Sets
A selection of popular engineerâs files suitable for filing and deburring on a wide variety of materials. Double cut teeth for rapid metal removal. Ideal for workshop or garage. Manufactured to BS498:1990 and American Federal Standard GGG-F-3256.
Contents (1 of each): bastard cut hand, second cut flat, round and half round. -
8″ (200mm) DOUBLE ENDED SECOND CUT SAW FILERp62.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Double Ended Saw
Double Ended Saw
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Double Ended Saw – Edges taper towards point. For filing and sharpening saws. Points are left uncut. Instead of having a tang, both ends are tapered.âThey are used for sharpening saws having a 60° angle.âThe teeth are cut from each end towards the centre. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) FLAT BASTARD ENGINEERS FILERp50.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) FLAT SECOND ENGINEERS FILERp52.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) FLAT SMOOTH ENGINEERS FILERp57.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) HALF ROUND BASTARD ENGINEERS FILERp81.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) HALF ROUND SECOND ENGINEERS FILERp83.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) HALF ROUND SMOOTH ENGINEERS FILERp84.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
8″ (200mm) HAND BASTARD ENGINEERS FILERp51.000Read moreEngineerâs Hand Files
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard