Archives: Products
Showing 9649–9664 of 23773 results
-
35mm (1.3/8″) WAD/HOLLOW PUNCHRead moreKennedy Reduced Shank Wad Punches
For a variety of soft materials. Can be used for cutting holes and producing clean edged discs from the material being cut.
-
35mm BOOSTER CABLES 12/24V 480AMP HEAVY DUTYRead moreKennedy Battery Booster Cable
For use on cars and light commercial vehicles. Easy starting with low power loss. Tangle-free copper cable with double insulation. Robust fully insulated colour coded clamps.
Light Duty – Suitable for 12 and 24V systems. 3m cable. 16mm2 multi-stranded cable core rated to 220amps.
Medium Duty – Suitable for 12 and 24V systems. 3.5m cable. 25mm2 multi-stranded cable core rated to 350amps.
Heavy Duty – Suitable for 12 and 24V systems. 4.5m cable. 35mm2 multi-stranded cable core rated to 480amps.All Kennedy booster cables are supplied with a heavy-duty storage bag.
-
35mm CARBIDE TIPPED HOLESAWRead moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
35mm DIA. (1.3/8″) BI-METAL HOLESAWRp152.000Read moreConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.
-
35mm DIA. (1.3/8″) BI-METAL V/P HOLESAWRp152.000Read moreVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
35mm FORSTNER BITRead moreSenator Forstner Bits
For precision hole boring. Self piloting point combined with trepanning style cutting action will produce overlapping holes in any direction. Ideal for scroll and scalloping applications. Suitable for use in bench and pillar drills to bore a wide range of timber, plastics and other materials.
-
35mm IMPACT SOCKET 1″ SQDRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Standard Length, 6-Point
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
35mm IMPACT SOCKET 3/4″ SQ DRRead moreChrome Molybdenum Impact Sockets: 3/4″ Drive Metric, Standard Length, 6-Point
3/4″ Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
35mm LONG MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Long Series
Shank diameter: 19mm/3/4â.
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm. -
35mm RUBBER DOOR STOP BLACKRead moreRubber Door Stop
Screw through type for fixing to floor. Sold individually – boxed in 50’s.
-
35mm SHORT MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Short Series
Shank diameter: 19mm/3/4â.
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm. -
35mm SLIMLINE BRASS PADLOCK LONG STEEL SHACKLERead moreBrass Slimline
Solid brass body with a hardened steel changeable shackle. For indoor and outdoor use on minimum to medium security items.
-
35mm WHITEBOARD MAGNETS ASSORTED COLOURS (PK-10)Read moreMagnetic Markers
Round flat top magnets for use on magnetic planning boards, white boards or easels.
Supplied in packs of 10 -
36 DRAWER COMB. PARTS STORAGE CABINETRead moreSenator Small Parts Storage Cabinets
Manufactured from heavy gauge steel, painted finish with transparent plastic drawers, allows contents to be viewed when the drawer is closed. The lip on the rear of the drawer allows it to be opened fully without falling out. The cabinets can be stacked or mounted to the wall to maximise use of storage space.
-
36 LED LEAD LAMP C/W UNICLAMP 12V DC CLIPSRead moreKennedy LED Inspection Lamps with Swivel Clamp
The high light output and durable construction make them ideal for use in engine bays and other low light work areas. The ball-jointed swivel clamp gives maximum positioning versatility. Convenient grip mounted ON/OFF switch. Oil, petrol and UV resistant.
Rechargeable – Lasts up to 4 hours when fully charged.
12V – 4.8m power cable allows use in remote areas. -
36 x 20 x 300mm RECTANGULAR KEY STEELRead moreKennedy Industrial Key Steel – Rectangular: Metric
Rectangular â Metric
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request.