Archives: Products
Showing 9601–9616 of 23773 results
-
34.00mm HSS T/S DRILLRp1.898.000Read moreSherwood HSS Taper Shank Drills, 4 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
34.00mm HSS T/S SP/FL MACHINE REAMERRead moreTaper Shank Machine Reamers
Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.
Tolerances (to H7)
Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.
Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014.
Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016. -
34.50mm HSS T/S DRILLRead more
Sherwood HSS Taper Shank Drills, 4 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
34/36mm C-SPANNERRead moreC-Hook Spanners
Chrome vanadium steel. Specifically designed for use with slotted retaining rings. Conform to DIN 1810A.
-
3414 SHIMRp148.000Read moreIndexa Indexable Tooling Spares – Shims
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you are using.
-
3416 SHIMRp168.000Read moreIndexa Indexable Tooling Spares – Shims
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you are using.
-
3422 SHIMRp229.000Read moreIndexa Indexable Tooling Spares – Shims
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you are using.
-
34mm CARBIDE TIPPED HOLESAWRead moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
34mm DEEP IMPACT SOCKET 1″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Deep Length, 6-Point
1â Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
34mm DEEP IMPACT SOCKET 3/4″ SQ DRRead moreChrome Molybdenum Impact Sockets: 3/4″ Drive Metric, Deep Length, 6-Point
3/4″ Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
34mm IMPACT SOCKET 1″ SQDRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Standard Length, 6-Point
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
34mm IMPACT SOCKET 3/4″ SQ DRRead moreChrome Molybdenum Impact Sockets: 3/4″ Drive Metric, Standard Length, 6-Point
3/4″ Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
34mm LONG MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Long Series
Shank diameter: 19mm/3/4â.
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm. -
34mm SHORT MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Short Series
Shank diameter: 19mm/3/4â.
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm. -
34mm SPARK RESISTANT SOCKET 3/4″ SQ. DRIVE Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Sockets
Sockets
12 point bi-hexagon.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
35-40mm 3 POINT INTERNAL MICROMETERRead moreOxford 3 Point Bore Individual Micrometers
Individual Micrometers
Designed to self-centre, for accurate measuring of bores. Extension rods for measuring 170mm deep on 11 – 20mm and 220mm deep on 20 – 40mm. Satin finish, fitted with knurled ratchet stop.