Archives: Products
Showing 4465–4480 of 23773 results
-
14mm IMPACT SOCKET 3/8″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 3/8″ Drive Metric, Standard Length, 6-Point
3/8â Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
14mm INSULATED HEXAGON SOCKET 1/2″ SQ/DRRead moreInsulated Sockets & Accessories
All products are quality tested and fully insulated to 1000V AC. Conforms to VDE 0680/201 and IEC 900 standards. All 1/2â square drive.
Insulated Reversible Ratchet Handle.
125 & 250mm Insulated Extension Bars.
200mm Insulated T-Handle.
Insulated Single Hexagon Sockets. -
14mm INSULATED OPEN JAW WRENCHRead moreInsulated Spanners
Single End Open Jaw
Chrome vanadium single ended open jaw spanners. Spanner dimensions conform to DIN 7446. Fully insulated to conform to VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V. -
14mm INSULATED RING SPANNERRead moreInsulated Spanners
Insulated Single End Ring Spanners
Chrome vanadium single ended open jaw spanners. Spanner dimensions conform to DIN 7446. Fully insulated to conform to VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V. -
14mm LONG MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Long Series
Shank diameter: 19mm/3/4â.
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm. -
14mm MAG PLAIN HEAVY DUTY FITMENTRead moreKennedy Magnetic Stand Fitments – Heavy Duty Fitment, Plain
All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.
Heavy Duty Fitment – Plain
Fitted as standard to KEN-333-2070K.
Column: 20 x 266mm.
Cross bar: 12 x 200mm.
Threaded: M8 x 1.25mm. -
14mm O/E CROWFOOT WRENCH3/8″ SQ. DRIVERead moreKennedy Crowfoot Wrenches, 3/8″
Chrome vanadium wrenches designed to be used for getting into tight spots and hard to reach areas, in particular around tubing such as hydraulic lines etc. For use with 3/8â square drive tools.
-
14mm OFFSET CV COMBINATION SPANNERRead moreKennedy Industrial Offset Combination Spanners – Metric
Metric
Chrome vanadium steel. 15° cranked open end. Offset ring end. Up to 25% longer than conventional DIN 3113 combination spanners. Conform to DIN 3113B. -
14mm PROFESSIONAL COMBINATION WRENCHRead moreKennedy Professional Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spannermaking for easier cleaning and preventing rust. Long reach, wall drive. Conform with ANSE B107.6. -
14mm RATCHET COMBINATIONWRENCHRead moreKennedy Professional Ratchet Combination Spanners – Metric
Metric
Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5° movement to operate ratchet. Thin wall design for greater
access. Conform to ASME B107.6. -
14mm REVERSIBLE COMBINATION SPANNERRead moreKennedy Professional Reversible Combination Spanner – Metric
Metric
Bi-hexagonal 15 degree offset rings with a 72 teeth lever ratcheting system that requires only 5 degree movement to operate, making them ideal for use in tight areas. Made from high quality Chrome Vanadium Steel with mirror polish finish to prevent oil and dirt from adhering to the spanner. Heads conform to ASME B107.6. -
14mm SHORT ARM COMBINATION SPANNERRead moreKennedy Short Arm Combination Spanners – Metric
Metric
Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion-resistant and easy to clean. The jaws and ring are offset at 15° for easier location and application of torque to the fastener. Suitable for use in areas of very restricted access. Conforms to ASME B107.6. -
14mm SHORT MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Short Series
Shank diameter: 19mm/3/4â.
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm. -
14mm SHORT RATCHET COMBINATION WRENCHRead moreKennedy Short Arm Ratchet Combination Spanners – Metric
Metric
Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms to ANSI 8107.6. -
14mm SINGLE HEX DEEP SOCKET 1/4″ SQ DRRead moreKennedy Bi-Hexagon Sockets, 1/4″ – Metric
Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
14mm SINGLE HEX SOCKET 1/2″ SQ DRRead moreKennedy Single-Hexagon Standard Length Sockets, 1/2″
Single-Hexagon Sockets
Six point – offer a more positive location, particularly on worn or rounded nuts, but require a one-sixth turn to engage the next point of the socket.