Category

Call To +62 31 3330-0020

Category

Archives: Products

Showing 4449–4464 of 23773 results

  • 14mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 14mm HSS PLAIN SHANK T-SLOT CUTTER
    Rp2.077.000

    Sherwood HSS Plain Shank T-Slot Cutters

    Used for machining T-slots on slide tables, fixtures etc. to DIN 650. For milling structural, carburising and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2” have 6 flutes and 18mm and 5/8” upwards have 8 flutes. Made to DIN 851. Flute form 12° RH/LH

    Metric Limits of Tolerance
    Diameter: +0.13 – 0.13
    Length: +0.13 – 0.13

    Read more
  • 14mm HSS SC/SH B/N SLOT DRILL

    Sherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric

    Short Series Type B210T
    Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 14mm HSS SC/SH END MILL

    Sherwood HSS Threaded Shank End Mills Multi Flute – Metric

    Short Series E410T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.

    Read more
  • 14mm HSS SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank Slot Drills 2 Flute – Metric

    Short Series S210T – Metric
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 14mm HSS SC/SH T-SLOT CUTTER

    Sherwood T-Slot Cutters Threaded Shank HSS – Metric

    Used for machining T-slots on slide tables, fixtures etc., to DIN 650. For milling structural, carburized and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2″ have 6 flutes and 18mm and 5/8″ upwards have 8 flutes. Made to DIN 851. Shank to DIN 1835/D. Flute form 12° RH/LH.

    Metric Limits of Tolerance
    Diameter: +0.13 – 0.13
    Length: +0.13 – 0.13

    Read more
  • 14mm HSS-COBALT 2FL ST/SH SLOT DRILL 110mm O/A

    Sherwood HSS-Co Plain Shank Milling Cutters 2 Flute – Long Series

    Long Series
    Non-centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Read more
  • 14mm HSS-COBALT 2FL ST/SH SLOT DRILL 83mm O/A
    Rp634.000

    Sherwood HSS-Co Plain Shank Milling Cutters 2 Flute – Regular Length

    Regular Length
    Non-centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Read more
  • 14mm HSS-COBALT 3FL SC/SH SLOT DRILL

    Sherwood HSS-Co 5% Threaded Shank Slot Drills 3 Flute, Regular Series – Metric

    Regular Series Type 5321T
    Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
  • 14mm HSS-COBALT L/S SC/SH END MILL

    Sherwood HSS-Co 5% Threaded Shank End Mills 4, 6 & 8 Flute, Long Series – Metric

    Long Series Type E431T
    Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
  • 14mm HSS-COBALT L/S SC/SH SLOT DRILL

    Sherwood 2 Flute Slot Drills Threaded Shank HSS-Co 5%, Long – Metric

    Long Series Type S231T – Metric
    Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 14mm HSS-COBALT SC/SH END MILL

    Sherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Metric

    Regular Series Type E411T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
  • 14mm HSS-COBALT SC/SH KNUCKLE RIPPER

    Sherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Standard Series – Metric

    Standard Series K412T

    Knuckle Form
    For use when heavy metal removal and good surface finish are required. Uncoated. Bright finish. Flute type: 25° spiral, roughing truncated. Shank diameter to js14.

    Metric Tolerances
    Diameter ± 0.127mm

    Read more
  • 14mm HSS-COBALT SC/SH SLOT DRILL

    Sherwood HSS-Co 5% Threaded Shank Slot Drills 2 Flute – Metric

    Short Series – Metric
    Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 14mm IMPACT SOCKET 1/2″ SQ DR

    Kennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Metric, Standard Length, 6-Point

    1/2″ Drive Metric, Standard Length, 6-Point
    Conform to: DIN 3129.

    Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

    Read more
  • 14mm IMPACT SOCKET 1/4″ SQ DR

    Kennedy Chrome Molybdenum Impact Sockets: 1/4″ Drive Metric, Standard Length, 6-Point

    1/4” Drive Metric, Standard Length, 6-Point
    Conform to: DIN 3129.

    Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping