Archives: Products
Showing 4497–4512 of 23773 results
-
14mm x 15mm CH/VANADIUM O/END SPANNERRead moreKennedy Industrial Open Ended Spanners – Metric
Metric
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth. -
14mm x 15mm PROFESSIONALO/E SPANNERRead moreKennedy Professional Open Ended Spanners
Chrome vanadium steel with a highly polished mirror finish preventing oil and dirt from adhering to the spanner. Made to American Federal Standards, extra thick heads offer higher torque forces to be applied therefore improved performance.
Conform to ASME B107.39 -
14mm x 17mm CH/VANADIUM O/END SPANNERRead moreKennedy Industrial Open Ended Spanners – Metric
Metric
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth. -
14mm x 55mm FLAT BIT SKT1/2″ SQ DRRead moreScrewdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2″ square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
14mm x 65mm HEX BIT SOCKET 1/2″ SQ DRRead moreScrewdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2″ square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
14mmx110mm O/A HSS-COBALT 4FL PL/SH END MILLRead moreSherwood HSS-Co Plain Shank Milling Cutters 4 Flute, Long Series – Metric
Long Series
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
14mmx15mm CHROME VANADIUM O/E SPANNERRead moreYamoto Industrial Open Ended Spanners – Metric
Metric
Made from chrome vanadium steel with polished head and 15° offset. Conform to ASME B107.39. -
14mmx15mm DOUBLE ENDED BOX SPANNERRead moreKennedy Box Spanners – Metric
Metric
Manufactured from high quality steel tube. Zinc plated for corrosion resistance, each supplied with tommy bar. -
14mmx15mm OFFSET RATCHETRING SPANNERRead moreKennedy Reversible Ratchet Ring Wrenches, 25° Offset – Metric
25° Offset: Metric
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.
*Single hexagon -
14mmx15mm STRAIGHT RATCHET RING WRENCHRead moreKennedy Reversible Ratchet Ring Wrenches, Straight – Metric
Straight: Metric
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings. -
14mmx15mm WORKSHOP OPEN END SPANNERRead moreOpen Jaw Spanners – Double-Ended
Double-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. -
14mmx17mm WORKSHOP OPEN END SPANNERRead moreOpen Jaw Spanners – Double-Ended
Double-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. -
14mmx65mm HEX BIT SOCKET1/2″ SQ. DR.Read moreYamoto Screwdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2â square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free to ensure non sparking. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
14mmx83mm O/A HSS-COBALT 4FL PL/SH END MILLRp666.000Read moreHSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric
Regular Length
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
14mmxM12 T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Metric
58 Pieces Metric Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
14oz CROSS PEIN HAMMER WOOD SHAFTRead moreCross Pein Hammers
Cross pein hammers are traditionally used by joiners and fitters. Cross pein can be used for setting pins and nails prior to âdriving homeâ with the flat faced pein.
Warrington Hardwood Shaft
Close grained hardwood shaft shaped to comfortably fit in the hand. Forged steel head with ground and polished striking face.