Archives: Products
Showing 4433–4448 of 23773 results
-
14mm DEEP SOCKET 1/4″ SQDRRead moreKennedy Bi-Hexagon Sockets, 1/4″ – Metric
Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
14mm DEEP SOCKET 3/8″ SQ. DRIVERead moreYamoto Bi-Hexagon Deep Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
14mm DEEP SOCKET 3/8″ SQDRRead moreKennedy Bi-Hexagon Deep Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a
one-twelfth turn to engage the next point of the socket. -
14mm DIA. (9/16″) BI-METAL HOLESAWRp118.000Add to cartConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.
-
14mm DIA. (9/16″) BI-METAL V/P HOLESAWRp118.000Read moreVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
14mm DIA. x 125mm COBALT TOOLBITRead moreHSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
14mm DIN 471 EXTERNAL CIRCLIPS (PACK 50)Read moreQualfast Circlips: External
Circlips simplify designs and linked with lower installation costs are the ideal item for
replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. External DIN 471. -
14mm DIN 472 INTERNAL CIRCLIPS (PACK 50)Read moreQualfast Circlips: Internal
Circlips simplify designs and linked with lower installation costs are the ideal item for
replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. Internal DIN 472. -
14mm DROP FORGED COMBINATION SPANNERRead moreSenator Combination Spanners – Metric
Manufactured from drop forged steel with 15° cranked heads. Conform to ASME B107.6.
-
14mm EXTRACTOR SOCKET 3/8″ SQ. DRIVERead moreKennedy Impact 3/8″ Sq. Dr. Extractor Sockets
Square Drive Impact Extractor Sockets
Extracts rounded, seized or painted right hand threaded fasteners, the reverse spiral flutes are designed to bite into seized nuts and bolts providing greater grip for extraction. The ejector pin is to drive out the fasteners from sockets, once removed.
Contents: 10, 11, 12, 13, 14, 15, 16, 17 and 19mm extractor sockets plus ejector pin. -
14mm FLEX HEAD RATCHET WRENCHRead moreKennedy Professional Flex-Head Ratchet Combination Spanners – Metric
Metric Ratchet Combination Spanners
Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5° movement to operate ratchet. Thin wall design for greater access. Head flexes up to 90° in either direction. Conform to ASME B107.6. -
14mm FLEXI RING END SOCKET 1/2″ S/DRead moreKennedy Flexi-Ring End Sockets, 1/2″
Made from polished chrome vanadium. These tough flexi-ring end sockets are designed to allow access over long studs and for awkwardly positioned nuts and bolts. Swivels through 220°.
-
14mm GO THROUGH SOCKETRead moreKennedy Go-Thru⢠Sockets for Ratchet Combination Spanner Set
Replacement Go-Thru⢠Sockets to suit Ratchet Combination Spanner Set
Quattro 4-in-1 – Q23M: This wrench set for 10 to 19mm applications comprises open ended wrenches, ratchet ring wrenches, Go-Thru⢠single hex ratchet wrenches and 1/4â, 3/8â and 1/2â square drive ratchets. All are made from chrome vanadium and are fully plated with a mirror finish. Supplied in a heavy duty fitted metal storage case with locking lid and carry handle. -
14mm HEX DRIVER IMPACT SOCKET 1/2″ SQ. DR.Read moreKennedy Chrome Molybdenum Impact Sockets & Accessories: 1/4″ Drive Reducers & Adaptors
Hexagon sizes: 6, 7, 8, 10, 12, 14, 15, 17, 18 and 19mm.
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. -
14mm HSS L/S SC/SH B/N SLOT DRILLRead moreSherwood HSS Threaded Shank Ball Nosed Slot Drills 2 Flute – Metric
Long Series Type B230T
Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30 helix. Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089 -
14mm HSS L/S SC/SH END MILLRead moreSherwood HSS Threaded Shank End Mills 4, 6 & 8 Flute – Metric
Long Series E430T
Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00. Tolerance: +0.1250, -0.0000.