Relaunch Promotion
Product Showcase
Category: HSS-EV Production Taps
HSS-EV Production Taps
Showing 113–128 of 128 results
-
M6x1 YELLOW SP/FL 371 HSS-EV OX TAPRead moreHSS-EV ‘Yellow Ring’ Taps
Spiral Flute – HSS-EV Oxidised Finish
For blind holes.
Taper lead to DIN form C (3 x P).
Tapping tolerance:
Spiral flute to 6H.Suitable for the following Material Groups;
1.1
Mild soft steel & free machining non-alloy low carbon steel.
1.2
Non-alloy case hardening, structural & low to medium carbon steel.
1.3
Non-alloy, plain and medium carbon steel and castings -
M6x1 YELLOW SP/PT 371 HSS-EV OX TAPRead moreHSS-EV ‘Yellow Ring’ Taps
Spiral Point/Gun Nose –
HSS-EV Oxidised Finish
For through holes.
Taper lead to DIN form B.
(3.5 x P to 5.5 x P).
Tapping tolerance to 6H.Suitable for the following Material Groups;
1.1
Mild soft steel & free machining non-alloy low carbon steel.
1.2
Non-alloy case hardening, structural & low to medium carbon steel.
1.3
Non-alloy, plain and medium carbon steel and castings -
M7x1 GREEN SP/FL 371 HSS-EV NIT TAPRead moreHSS âGreen Ringâ Taps
Manufactured to DIN 371/376
Suitable for the following Material Groups
Spiral Flute – HSS-EV Nitride Finish
For blind holes. Taper lead to DIN form C
(2 x P to 3 x P). Tapping tolerance to 6H. -
M8x1.25 BLUE SP/FT 371 HSS-EV OX TAPRead moreHSS âBlue Ringâ Taps
Manufactured to DIN 371/376 Suitable for the following Material Groups
Note: Fluteless taps may also be used on stainless steel.
See âGreen Ringâ Fluteless on page 192.
Spiral Flute (BLT) –
HSS-EV Oxidised Finish
For deep blind holes.
Taper lead to DIN form C
(2 x P to 3 x P).
Tapping tolerance to 6H.
âBiteless Taperâ ISO Metric Coarse
Helix angle 45° -
M8x1.25 BLUE SP/FT 371 HSS-EV OX TAPRead moreSpiral Flute (BLF) – HSS-EV Oxidised Finish
For shorter blind holes. Taper lead to DIN form C (3 x P).
Tapping tolerance to 6H.
âBiteless Flatâ ISO Metric Coarse
Helix angle 45°. -
M8x1.25 BLUE SP/PT 371 HSS-EV OX TAPRead moreHSS âBlue Ringâ Taps
Manufactured to DIN 371/376 Suitable for the following Material Groups
Note: Fluteless taps may also be used on stainless steel.
See âGreen Ringâ Fluteless on page 192.
Spiral Point/Gun Nose –
HSS-EV Oxidised Finish
For through holes.
Taper lead to DIN form B
(3.5 x P to 5.5 x P).
Tapping tolerance to 6HX.
ISO Metric Coarse -
M8x1.25 GREEN F/LESS 371 HSS-EV BRT TAPRead moreHSS âGreen Ringâ Fluteless Taps
Lubrication grooves are a feature of all taps of M3.0 and over. Manufactured to DIN 371/376.
Fluteless – HSS-EV Bright Finish
For through and blind holes.
Taper lead to DIN form B
(3.5 x P to 5.5 x P). Tapping tolerance to 6H.
ISO Metric Coarse -
M8x1.25 GREEN F/LESS 371 HSS-EV TiN TAPRead moreHSS âGreen Ringâ Fluteless Taps
Lubrication grooves are a feature of all taps of M3.0 and over. Manufactured to DIN 371/376.
Fluteless – HSS-EV (TiN Coated)
For through and blind holes.
Taper lead to DIN form B
(3.5 x P to 5.5 x P). Tapping tolerance to 6H.
ISO Metric Coarse -
M8x1.25 GREEN SP/FL 371 HSS-EV NIT TAPRead more
HSS âGreen Ringâ Taps
Manufactured to DIN 371/376
Suitable for the following Material Groups
Spiral Flute – HSS-EV Nitride Finish
For blind holes. Taper lead to DIN form C
(2 x P to 3 x P). Tapping tolerance to 6H. -
M8x1.25 GREEN SP/PT 371 HSS-EV NIT TAPRead moreHSS âGreen Ringâ Taps
Manufactured to DIN 371/376
Suitable for the following Material Groups
Spiral Point/Gun Nose – HSS-EV Nitride Finish
For through holes. Taper lead to DIN form B
(3.5 x P to 5.5 x P).
Tapping tolerance to 6HX.
ISO Metric Coarse -
M8x1.25 RED RING SP/FL DIN 371 HSS-EV OX TAPRead moreSpiral Flute – HSS-EV
Oxidised Finish
For blind holes.
Taper lead to DIN form C (3 x P).
Tapping tolerance:
spiral flute to 6H.
ISO Metric Coarse
Helix angle 40°. Tapping depth 2.5 x D. -
M8x1.25 RED RING SP/PT DIN 371 HSS-EV BRT TAPRead moreHSS âRed Ringâ Taps
Manufactured to DIN 371/376
Suitable for the following Material Groups
Spiral Point/Gun Nose –
HSS-Co Bright Finish
For through holes.
Taper lead to DIN form B
(3.5 x P to 5.5 x P).
Tapping tolerance to 6HX.
ISO Metric Coarse -
M8x1.25 WHITE 371 HSS-EV NIT BLIND TAPRead moreHSS âWhite Ringâ Taps
Straight Flute – HSS-EV Nitride Finish
For blind holes. Plug/bottoming lead to
DIN form C (2 x P to 3 x P).
Tapping tolerance to 6HX. -
M8x1.25 WHITE 371 HSS-EV NIT THROUGH TAPRead more
HSS âWhite Ringâ Taps
Manufactured to DIN 371/376
Suitable for the following Material Groups
Straight Flute – HSS-EV Nitride Finish
For through holes. Taper lead to
DIN form D (taper) (3.5 x P to 5 x P).
Tapping tolerance to 6HX. -
M8x1.25 YELLOW SP/FL 371 HSS-EV OX TAPRead more
HSS-EV ‘Yellow Ring’ Taps
Spiral Flute – HSS-EV Oxidised Finish
For blind holes.
Taper lead to DIN form C (3 x P).
Tapping tolerance:
Spiral flute to 6H.Suitable for the following Material Groups;
1.1
Mild soft steel & free machining non-alloy low carbon steel.
1.2
Non-alloy case hardening, structural & low to medium carbon steel.
1.3
Non-alloy, plain and medium carbon steel and castings -
M8x1.25 YELLOW SP/PT 371 HSS-EV OX TAPRead more
HSS-EV ‘Yellow Ring’ Taps
Spiral Point/Gun Nose –
HSS-EV Oxidised Finish
For through holes.
Taper lead to DIN form B.
(3.5 x P to 5.5 x P).
Tapping tolerance to 6H.Suitable for the following Material Groups;
1.1
Mild soft steel & free machining non-alloy low carbon steel.
1.2
Non-alloy case hardening, structural & low to medium carbon steel.
1.3
Non-alloy, plain and medium carbon steel and castings