Archives: Products
Showing 81–96 of 23773 results
-
0.10mm x 12.7mm FEELER STRIP 300mm LONGRp41.000Add to cartKennedy Feeler Stock Strip
Inch sizes are 12â long, 1/2â wide. Millimetre sizes are furnished in 300mm lengths, 12·7mm wide. Rounded ends. Each piece marked with thickness and with convenient 3/16â (5mm) hole for hanging.
-
0.15mm x 12.7mm FEELER STRIP 300mm LONGRead moreKennedy Feeler Stock Strip
Inch sizes are 12â long, 1/2â wide. Millimetre sizes are furnished in 300mm lengths, 12·7mm wide. Rounded ends. Each piece marked with thickness and with convenient 3/16â (5mm) hole for hanging.
-
0.20mm x 12.7mm FEELER STOCK 7.6M COILRead moreKennedy Feeler Stock Coil
Also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6â or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm.
-
0.20mm x 12.7mm FEELER STRIP 300mm LONGRp32.000Add to cartKennedy Feeler Stock Strip
Inch sizes are 12â long, 1/2â wide. Millimetre sizes are furnished in 300mm lengths, 12·7mm wide. Rounded ends. Each piece marked with thickness and with convenient 3/16â (5mm) hole for hanging.
-
0.25 CARAT DIAMOND DRESSERRead moreSenator Diamond Dressers
For truing and dressing grinding wheels. Truing is the process of aligning the periphery of the grinding wheel so that it runs concentric with its axis of rotation. This allows accurate and precise relative motion between the grinding wheel and the part being ground. Dressing removes dulled abrasives and foreign material that has been embedded into the wheel. This allows the wheel to cut properly. These tools are mainly used to true straight-faced wheels.
3 Piece Set
For medium-duty use. 1/2â dia. x 6â (- 9100K). -
0.25mm HSS S/S JOBBER DRILLRp153.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
0.25mm x 12.7mm FEELER STRIP 300mm LONGRead moreKennedy Feeler Stock Strip
Inch sizes are 12â long, 1/2â wide. Millimetre sizes are furnished in 300mm lengths, 12·7mm wide. Rounded ends. Each piece marked with thickness and with convenient 3/16â (5mm) hole for hanging.
-
0.30mm HSS S/S JOBBER DRILLRp153.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
0.30mm x 12.7mm FEELER STRIP 300mm LONGRead moreKennedy Feeler Stock Strip
Inch sizes are 12â long, 1/2â wide. Millimetre sizes are furnished in 300mm lengths, 12·7mm wide. Rounded ends. Each piece marked with thickness and with convenient 3/16â (5mm) hole for hanging.
-
0.35mm HSS S/S JOBBER DRILLRp144.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
0.40mm CARBIDE PCB DRILLRp107.000Read moreSherwood Solid Carbide Printed Circuit Board Drills
Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards.
Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899. -
0.40mm HSS S/S JOBBER DRILLRp85.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
0.40mm x 12.7mm FEELER STRIP 300mm LONGRp32.000Add to cartKennedy Feeler Stock Strip
Inch sizes are 12â long, 1/2â wide. Millimetre sizes are furnished in 300mm lengths, 12·7mm wide. Rounded ends. Each piece marked with thickness and with convenient 3/16â (5mm) hole for hanging.
-
0.42mm HSS S/S JOBBER DRILLRp116.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
0.45mm CARBIDE PCB DRILLRp107.000Read moreSherwood Solid Carbide Printed Circuit Board Drills
Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards.
Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899. -
0.45mm HSS S/S JOBBER DRILLRead moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.