Archives: Products
Showing 97–112 of 23773 results
-
0.5-10mm JT2 KEYLESS RAPID CLAMP DRILL CHUCKRead moreSpiro-Rapid Clamping Industrial Keyless Drill Chucks
Allows quick tool change, while maintaining high precision and high concentricity. Fully hardened jaws, sleeve and retaining ring for durability and wear resistance. Self-tightening.
-
0.5-10mm JT33 KEYLESS RAPID CLAMP DRILL CHUCKRead moreSpiro-Rapid Clamping Industrial Keyless Drill Chucks
Allows quick tool change, while maintaining high precision and high concentricity. Fully hardened jaws, sleeve and retaining ring for durability and wear resistance. Self-tightening.
-
0.5-4.0mm 0JT H/D INDUSTRIAL CHUCKRead moreKennedy Heavy Duty Industrial Keyed Drill Chuck
Fully hardened and ground working parts. The jaws are centre ground for alignment and concentricity. Key holes and teeth are fully hardened for durability and wear resistance. To correctly tighten your keyed drill chuck use all key holes in turn to guarantee even pressure and maximum grip. Suitable for use on machine tools and all types of industrial power tools. Supplied with key. Manufactured to DIN 6349.
* Primarily for use with hand operated machines.
â Not suitable for reversing drills. -
0.5-4mm RATCHET CRIMPING PLIERSAdd to cartFerrule Crimp Tool
Ferrule crimp tool with full cycle ratcheting crimp frame and adjustable crimp pressure. Carbon steel jaws with a chemically blacked finish and PVC handles.
Model TCF 004
Capacity: 0.5, 0.75, 1.0, 1.5, 2.5 and 4mm². AWG 20, 18, 17, 16, 13 and 11.
Model TCF 016
Capacity: 6, 10 and 16mm². AWG 10, 8 and 6. -
0.5-6.5mm 1JT H/D INDUSTRIAL CHUCKRead moreKennedy Heavy Duty Industrial Keyed Drill Chuck
Fully hardened and ground working parts. The jaws are centre ground for alignment and concentricity. Key holes and teeth are fully hardened for durability and wear resistance. To correctly tighten your keyed drill chuck use all key holes in turn to guarantee even pressure and maximum grip. Suitable for use on machine tools and all types of industrial power tools. Supplied with key. Manufactured to DIN 6349.
* Primarily for use with hand operated machines.
â Not suitable for reversing drills. -
0.5-6.5mm 3/8x24F H/D INDUSTRIAL CHUCKRead moreKennedy Heavy Duty Industrial Keyed Drill Chuck
Fully hardened and ground working parts. The jaws are centre ground for alignment and concentricity. Key holes and teeth are fully hardened for durability and wear resistance. To correctly tighten your keyed drill chuck use all key holes in turn to guarantee even pressure and maximum grip. Suitable for use on machine tools and all types of industrial power tools. Supplied with key. Manufactured to DIN 6349.
* Primarily for use with hand operated machines.
â Not suitable for reversing drills. -
0.5-6mm RATCHET CRIMPING PLIERSAdd to cartInsulated Terminal Crimp Tool
Model TCI 006
Insulated terminal crimp tool, with full cycle ratcheting crimp frame and colour coded jaws, with adjustable and preset crimp pressure for accurate crimping. Carbon steel, hardened and tempered jaws with a chemically blacked finish and PVC handles.
Capacity:
Red: 0.5 – 1.5mm², AWG 20 – 16.
Blue: 2.5mm², AWG 14.
Yellow: 4.0 – 6.0mm², AWG 12 – 10. -
0.5-6mm UNINSULATED TERMINAL CRIMPING TOOLAdd to cartUninsulated Terminal Crimp Tool
Model TCU 006
Uninsulated terminal crimp tool with full cycle ratcheting crimp frame and adjustable crimp pressure. Carbon steel jaws with a chemically blacked finish and PVC handles.
Tab width: 6.3mm.
Capacity: 0.5 – 1.0, 1.0 – 2.5 and 4.0 – 6.0mm². -
0.50 CARAT DIAMOND DRESSERRead moreSenator Diamond Dressers
For truing and dressing grinding wheels. Truing is the process of aligning the periphery of the grinding wheel so that it runs concentric with its axis of rotation. This allows accurate and precise relative motion between the grinding wheel and the part being ground. Dressing removes dulled abrasives and foreign material that has been embedded into the wheel. This allows the wheel to cut properly. These tools are mainly used to true straight-faced wheels.
3 Piece Set
For medium-duty use. 1/2â dia. x 6â (- 9100K). -
0.50mm CARBIDE PCB DRILLRp107.000Read moreSherwood Solid Carbide Printed Circuit Board Drills
Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards.
Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899. -
0.50mm HSS S/S JOBBER DRILLRp232.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
0.50mm x 12.7mm FEELER STOCK 6.1M COILRead moreKennedy Feeler Stock Coil
Also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6â or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm.
-
0.50mm x 12.7mm FEELER STRIP 300mm LONGRead moreKennedy Feeler Stock Strip
Inch sizes are 12â long, 1/2â wide. Millimetre sizes are furnished in 300mm lengths, 12·7mm wide. Rounded ends. Each piece marked with thickness and with convenient 3/16â (5mm) hole for hanging.
-
0.52mm HSS S/S JOBBER DRILLRead moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
0.55mm CARBIDE PCB DRILLRp107.000Read moreSherwood Solid Carbide Printed Circuit Board Drills
Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards.
Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899. -
0.55mm HSS S/S JOBBER DRILLRp75.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
