Category

Call To +62 31 3330-0020

Category

Archives: Products

Showing 15569–15584 of 23773 results

  • 9mm DEEP SOCKET 1/4″ SQ DR

    Kennedy Bi-Hexagon Sockets, 1/4″ – Metric

    Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.

    Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

    Read more
  • 9mm DEEP SOCKET 3/8″ SQ DR

    Kennedy Bi-Hexagon Deep Sockets, 3/8″

    Bi-Hexagon Sockets
    12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a
    one-twelfth turn to engage the next point of the socket.

    Read more
  • 9mm DIN 471 EXTERNAL CIRCLIPS (PACK 50)

    Qualfast Circlips: External

    Circlips simplify designs and linked with lower installation costs are the ideal item for
    replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. External DIN 471.

    Read more
  • 9mm DIN 472 INTERNAL CIRCLIPS (PACK 50)

    Qualfast Circlips: Internal

    Circlips simplify designs and linked with lower installation costs are the ideal item for
    replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. Internal DIN 472.

    Read more
  • 9mm DIN 6799 ‘E’ CLIPS (PACK 25)

    Qualfast E-Clips

    E-clips simplify designs and linked with lower installation costs are the ideal item for replacing more traditional fasteners. All are manufactured from carbon steel with a phosphate finish. Conform to DIN 6799.

    Read more
  • 9mm DROP FORGED COMBINATION SPANNER

    Senator Combination Spanners – Metric

    Manufactured from drop forged steel with 15° cranked heads. Conform to ASME B107.6.

    Read more
  • 9mm HSS L/S SC/SH END MILL

    Sherwood HSS Threaded Shank End Mills 4, 6 & 8 Flute – Metric

    Long Series E430T
    Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00. Tolerance: +0.1250, -0.0000.

    Read more
  • 9mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 9mm HSS SC/SH B/N SLOT DRILL

    Sherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric

    Short Series Type B210T
    Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 9mm HSS SC/SH END MILL

    Sherwood HSS Threaded Shank End Mills Multi Flute – Metric

    Short Series E410T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.

    Read more
  • 9mm HSS SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank Slot Drills 2 Flute – Metric

    Short Series S210T – Metric
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 9mm HSS-COBALT L/S SC/SH KNUCKLE RIPPER

    Sherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Long Series – Inch

    Long Series Type K432T

    Knuckle Form
    For use when high metal removal rates area required. Bright finish. Flute type: 25° spiral, oughing truncated. Shank diameter to js14.

    Metric Tolerances
    Diameter ± 0.127mm

    Read more
  • 9mm HSS-COBALT L/S SC/SH SLOT DRILL

    Sherwood 2 Flute Slot Drills Threaded Shank HSS-Co 5%, Long – Metric

    Long Series Type S231T – Metric
    Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 9mm HSS-COBALT SC/SH END MILL

    Sherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Metric

    Regular Series Type E411T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
  • 9mm HSS-COBALT SC/SH KNUCKLE RIPPER

    Sherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Standard Series – Metric

    Standard Series K412T

    Knuckle Form
    For use when heavy metal removal and good surface finish are required. Uncoated. Bright finish. Flute type: 25° spiral, roughing truncated. Shank diameter to js14.

    Metric Tolerances
    Diameter ± 0.127mm

    Read more
  • 9mm HSS-COBALT SC/SH SLOT DRILL

    Sherwood HSS-Co 5% Threaded Shank Slot Drills 2 Flute – Metric

    Short Series – Metric
    Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping