Archives: Products
Showing 15537–15552 of 23773 results
-
92mm DIA. (3.5/8″) BI-METAL HOLESAWRp353.000Read moreConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.
-
92mm DIA. (3.5/8″) BI-METAL V/P HOLESAWRp353.000Read moreVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
931-15CM CUT 2 DIEMAKERS RIFFLER FILERead moreDiemakers Riffler Files
Swiss Pattern
Available in a complete range of shapes, the 15cm are used by diemakers, jewellers, silversmiths, engravers etc.
All are double ended with the same cut both ends. -
940-15CM CUT 2 DIEMAKERS RIFFLER FILERead moreDiemakers Riffler Files
Swiss Pattern
Available in a complete range of shapes, the 15cm are used by diemakers, jewellers, silversmiths, engravers etc.
All are double ended with the same cut both ends. -
943-15CM CUT 2 DIEMAKERS RIFFLER FILERead moreDiemakers Riffler Files
Swiss Pattern
Available in a complete range of shapes, the 15cm are used by diemakers, jewellers, silversmiths, engravers etc.
All are double ended with the same cut both ends. -
952-15CM CUT 2 DIEMAKERS RIFFLER FILERead moreDiemakers Riffler Files
Swiss Pattern
Available in a complete range of shapes, the 15cm are used by diemakers, jewellers, silversmiths, engravers etc.
All are double ended with the same cut both ends. -
955-15CM CUT 2 DIEMAKERS RIFFLER FILERead moreDiemakers Riffler Files
Swiss Pattern
Available in a complete range of shapes, the 15cm are used by diemakers, jewellers, silversmiths, engravers etc.
All are double ended with the same cut both ends. -
957-15CM CUT 2 DIEMAKERS RIFFLER FILERead moreDiemakers Riffler Files
Swiss Pattern
Available in a complete range of shapes, the 15cm are used by diemakers, jewellers, silversmiths, engravers etc.
All are double ended with the same cut both ends. -
959149 1M CONNECTING CABLERead moreKennedy Connecting Cables
For SPC data output compatible calipers. Complete with data hold switch.
-
959150 2M CONNECTING CABLERead moreKennedy Connecting Cables
For SPC data output compatible calipers. Complete with data hold switch.
-
95mm CARBIDE TIPPED HOLESAWRead moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
95mm CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
95mm DIA. (3.3/4″) BI-METAL HOLESAWRp385.000Read moreConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.
-
95mm DIA. (3.3/4″) BI-METAL V/P HOLESAWRp385.000Read moreVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
95mm IMPACT SOCKET 1-1/2″ DRRead moreChrome Molybdenum Impact Sockets: 1 1/2″ Drive Metric Size, Standard Length, 6-Point
1 1/2″ Drive Metric Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
95mm IMPACT SOCKET 1″ SQDRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Standard Length, 6-Point
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.