Archives: Products
Showing 15601–15616 of 23773 results
-
9mm WORKSHOP OPEN END SPANNERRead moreKennedy Open Jaw Spanners – Single-Ended
Single-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 894. -
9mm x 55mm FLAT BIT SKT 1/2″ SQ DRRead moreScrewdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2″ square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
9mmx11mm WORKSHOP OPEN END SPANNERRead moreOpen Jaw Spanners – Double-Ended
Double-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. -
9mmx14mm FELT BOB CONE TYPE 3mm SHANKRead moreFelt Bobs
Ball Nose (Cone)
York Felt Bobs are made of pure wool in a variety of sizes, shapes. The mandrels are exactly centered for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds. -
9mmx66M BLUE VINYL TAPE (PK-6)Read moreVinyl Bag Neck Sealing Tape
Rolls of adhesive vinyl tape. 9mm wide x 66m in length on 75mm diameter cores. Can be used in many applications, but are mainly sold to be used with the neck bag sealer
(see below).
Pack quantity: 6 rolls -
9mmx66M RED VINYL TAPE (PK-6)Read moreVinyl Bag Neck Sealing Tape
Rolls of adhesive vinyl tape. 9mm wide x 66m in length on 75mm diameter cores. Can be used in many applications, but are mainly sold to be used with the neck bag sealer
(see below).
Pack quantity: 6 rolls -
9mmx69mm O/A HSS-COBALT 4FL PL/SH END MILLRp332.000Read moreHSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric
Regular Length
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
9PCE SDS-PLUS HAMMER DRILL BIT SETRp773.000Add to cartKennedy SDS-Style Fitting Drill Bit Sets
Kennedy Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035.
7 Piece
5, 6 and 8mm x 110mm overall length.
6, 8, 10 and 12mm x 160mm overall length.9 Piece
5, 5.5, 6 and 7mm x 160mm overall length.
8 x 210mm, 8 x 260mm, 12 x 216mm, 12 x 316mm, 16 x 250mm overall length. -
9V NIMH RECHARGEABLE 170MAH BATTERYRead moreEdison AA 2500mAh NiMH Rechargeable Batteries (Pk of 4)
Edison NiMH batteries can be recharged 100s of times, saving you money and the environment by reducing the amount of single use batteries ending up in landfill sites.
Nickel Metal Hydride recharagable batteries do not suffer from voltage depression and NiMH batteries do not contain harmful cadmium, mercury or lead. Unlike Cadmium rechargeables, which mean they are a reliable solution for today’s power hungry devices, such as cameras, MP3 players and hand held game consoles.
-
9×1/4×7/8″ A30RBF DPC GRINDING DISCRead moreDepressed Centre Cutting & Grinding Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 27 Depressed Centre Grinding
Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for âfree handâ or wet grinding.Optimum angle for use 25 to 35°.
-
9×1/4×7/8″ X24RBF DPC GRINDING DISCRead moreDepressed Centre Cutting & Grinding Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 27 Depressed Centre Grinding
Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for âfree handâ or wet grinding.Optimum angle for use 25 to 35°.
-
9×1/8″x7/8″ A3ORBF CUTTING DISCRead moreType 42 Depressed Centre Cutting
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 42 Depressed Centre Cutting
Manufactured to assure operator safety and optimum performance. For use with all portable grinders/cut-off machines. Not to be used for âfree handâ cutting and importantly not to be used for grinding. -
9×1/8×7/8″ A30TBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
9×1/8×7/8″ C24TBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
9x125mm FLAT COLD CHISELRead moreKennedy Cold Chisels – Chrome Vanadium: Flat
Flat
Used for cutting and chipping cold metals and brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals. -
9x150mm FLAT COLD CHISELAdd to cart
Kennedy Cold Chisels – Chrome Vanadium: Flat
Flat
Used for cutting and chipping cold metals and brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals.