Archives: Products
Showing 14289–14304 of 23773 results
-
7mmx100mm HEX DRIVER BIT 1/2″ SQ DRRead moreScrewdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2″ square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
7mmx30mm HEXAGON BIT 10mm DRIVERead moreKennedy Screwdriver Bits: 10mm Hex Drive Bits – Hexagon
Hexagon
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
7mmx66mm O/A HSS-COBALT 4FL PL/SH END MILLRead moreHSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric
Regular Length
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
7mmx75mm HEXAGON BIT 10mm DRIVERead moreKennedy Screwdriver Bits: 10mm Hex Drive Bits – Hexagon
Hexagon
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
7mmx8mm MINIATURE OPEN END SPANNERRead moreKennedy Miniature Open Ended Spanners – Metric
Metric. Conform to BS 192 : 1982 & DIN 3110.
-
7mmx8mm WORKSHOP OPEN END SPANNERRead moreOpen Jaw Spanners – Double-Ended
Double-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. -
7oz MAGNETIC UPHOLSTER HAMMER HICKORY SHAFTRead moreMagnetic Tack Hammers
Hickory Shaft
For holding and driving tacks. -
7oz WELDERS CHIPPING HAMMER SPRING STEEL SHAFTRead moreWelders Chipping Hammers
Scaling and chipping hammers. For boiler scaling, weld dressing etc.
Spring Steel Shaft
Hardened and tempered steel head chisel edge and point striking faces with epoxy coating. Spring steel impact absorbing handle for user comfort. -
7PC 6-22mm OFFSET RATCHET RING SPANNER SETRead moreReversible Ratchet Ring Wrenches, 25° Offset – Sets
25° Offset: Sets
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.Sets Contents:
7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 17 x 19 and 21 x 22mm.
5 Piece AF: 1/4″ x 5/16″, 3/8″ x 7/16″, 1/2″ x 9/16″, 5/8″ x 11/16″ and 3/4″ x 7/8″. -
7PC 6-22mm STRAIGHT RATCHET RING SPANNER SETRead moreKennedy Reversible Ratchet Ring Wrenches, Straight – Sets
Straight: Sets
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.Sets
7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 17 x 19 and 21 x 22mm
5 Piece AF: 1/4″ x 5/16″, 3/8″ x 7/16″, 1/2″ x 9/16″, 5/8″ x 11/16″ and 3/4″ x 7/8″ -
7PCE SDS-PLUS HAMMER DRILL BIT SETRp445.000Add to cartKennedy SDS-Style Fitting Drill Bit Sets
Kennedy Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035.
7 Piece
5, 6 and 8mm x 110mm overall length.
6, 8, 10 and 12mm x 160mm overall length.9 Piece
5, 5.5, 6 and 7mm x 160mm overall length.
8 x 210mm, 8 x 260mm, 12 x 216mm, 12 x 316mm, 16 x 250mm overall length. -
7×1.1/2″ SILVER-TT POZI CSK WOODSCREW BZP (200)Read moreMatlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
7×1″ SILVER-TT POZI CSK WOODSCREW BZP (200)Read more
Matlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
7×1/4×7/8″ A30RBF DPC GRINDING DISCRead moreDepressed Centre Cutting & Grinding Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 27 Depressed Centre Grinding
Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for âfree handâ or wet grinding.Optimum angle for use 25 to 35°.
-
7×1/4×7/8″ R30RBF DPC GRINDING DISCRead moreDepressed Centre Cutting & Grinding Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 27 Depressed Centre Grinding
Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for âfree handâ or wet grinding.Optimum angle for use 25 to 35°.
-
7×1/8×7/8″ A30TBF CUTTING DISCRead moreType 42 Depressed Centre Cutting
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 42 Depressed Centre Cutting
Manufactured to assure operator safety and optimum performance. For use with all portable grinders/cut-off machines. Not to be used for âfree handâ cutting and importantly not to be used for grinding.