Archives: Products
Showing 14241–14256 of 23773 results
-
76x50x6mm NYLON INTERLEAVED WHEEL FINERead moreYork Shaft Mounted Combi Wheels – Interleaved
Interleaved Wheels
Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Ideal for matching/blending a finish, light deburring, decorative/cosmetic applications. Alternate flaps of abrasive are interleaved with a versatile high quality nylon. 6mm shank diameter. Suitable for: deburring, producing cosmetic finishes on most materials, rust removal and blending. -
76x50x6mm NYLON INTERLEAVED WHEEL MEDIUMRead moreYork Shaft Mounted Combi Wheels – Interleaved
Interleaved Wheels
Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Ideal for matching/blending a finish, light deburring, decorative/cosmetic applications. Alternate flaps of abrasive are interleaved with a versatile high quality nylon. 6mm shank diameter. Suitable for: deburring, producing cosmetic finishes on most materials, rust removal and blending. -
77-908SPF SUPER PLASTIC SPARE FACERead moreSpare Striking Faces
Plastic
For malleable iron head hammers and split head hammers. -
77-910SPF SUPER PLASTIC SPARE FACERead moreSpare Striking Faces
Plastic
For malleable iron head hammers and split head hammers. -
77-914SPF SUPER PLASTIC SPARE FACERead moreSpare Striking Faces
Plastic
For malleable iron head hammers and split head hammers. -
77-916SPF SUPER PLASTIC SPARE FACERead moreSpare Striking Faces
Plastic
For malleable iron head hammers and split head hammers. -
77-922SPF SUPER PLASTIC SPARE FACERead moreSpare Striking Faces
Plastic
For malleable iron head hammers and split head hammers. -
79mm DIA. (3.1/8″) BI-METAL HOLESAWRp286.000Read moreConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.
-
79mm DIA. (3.1/8″) BI-METAL V/P HOLESAWRp286.000Read moreVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
7LB SLEDGE HAMMER FIBREGLASS SHAFT BSS876Read moreKennedy Sledge Hammers: Fibreglass Shaft (BS 876 Sledge Hammers)
Double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails. They are available with a hickory or fibreglass shaft.
Fibreglass Shaft (BS 876 Sledge Hammers)
Dampens the impact transmitted to the userâs hand and wrist. Tested to the requirements of BS 876: 1981 (head stamped BS 876). -
7LB SLEDGE HAMMER HICKORY SHAFTRead moreSledge Hammers
Double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails. They are available with a hickory or fibreglass shaft.
Hickory Shaft
With fine grain, forged steel head, hardened and tempered with polished faces. -
7mm CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
7mm CHROME VANADIUM COMBINATION SPANNERRead moreYamoto Industrial Combination Spanners
Made from chrome vanadium steel with polished head and 15° offset. Conform to ASME B107.6.
-
7mm DEEP IMPACT SOCKET 3/8″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 3/8″ Drive Metric, Standard Length, 6-Point
3/8â Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
7mm DEEP SOCKET 1/4″ SQ DRRead moreKennedy Bi-Hexagon Sockets, 1/4″ – Metric
Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
7mm DIN 471 EXTERNAL CIRCLIPS (PACK 100)Read moreQualfast Circlips: External
Circlips simplify designs and linked with lower installation costs are the ideal item for
replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. External DIN 471.