Archives: Products

Showing 14257–14272 of 23773 results

7mm DIN 6799 ‘E’ CLIPS (PACK 100)

Qualfast E-Clips

E-clips simplify designs and linked with lower installation costs are the ideal item for replacing more traditional fasteners. All are manufactured from carbon steel with a phosphate finish. Conform to DIN 6799.

Read more
7mm DROP FORGED COMBINATION SPANNER

Senator Combination Spanners – Metric

Manufactured from drop forged steel with 15Â° cranked heads. Conform to ASME B107.6.

Read more
7mm HEX DRIVER IMPACT SOCKET 1/2″ SQ. DR.

Kennedy Chrome Molybdenum Impact Sockets & Accessories: 1/4″ Drive Reducers & Adaptors

Hexagon sizes: 6, 7, 8, 10, 12, 14, 15, 17, 18 and 19mm.
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
7mm HEX DRIVER IMPACT SOCKET 3/8″ SQ. DR.

Kennedy Chrome Molybdenum Hex Driver Impact Sockets 3/8″ Sq. Dr.

Hexagon sizes: 4, 5, 6, 7, 8, 10 and 12mm.
Conforms to DIN 3129.

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
7mm HSS L/S SC/SH B/N SLOT DRILL

Sherwood HSS Threaded Shank Ball Nosed Slot Drills 2 Flute – Metric

Long Series Type B230T
Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30 helix. Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
7mm HSS L/S SC/SH END MILL

Sherwood HSS Threaded Shank End Mills 4, 6 & 8 Flute – Metric

Long Series E430T
Used for profile milling and producing open slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00. Tolerance: +0.1250, -0.0000.

Read more
7mm HSS L/S SC/SH SLOT DRILL

Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

Long Series 5230T
Used for milling keyways and slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

*Based on BS122: Part 4: 1980 though specific diameter is not included.

Read more
7mm HSS SC/SH B/N SLOT DRILL

Sherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric

Short Series Type B210T
Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
7mm HSS SC/SH END MILL

Sherwood HSS Threaded Shank End Mills Multi Flute – Metric

Short Series E410T
Used for profile milling and producing open slots. Bright finish. Flute type : 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.

Read more
7mm HSS SC/SH SLOT DRILL

Sherwood HSS Threaded Shank Slot Drills 2 Flute – Metric

Short Series S210T – Metric
Used for milling keyways and slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
7mm HSS-COBALT 2FL ST/SH SLOT DRILL 66mm O/A

Sherwood HSS-Co Plain Shank Milling Cutters 2 Flute – Regular Length

Regular Length
Non-centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30Â° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

Read more
7mm HSS-COBALT L/S SC/SH KNUCKLE RIPPER

Sherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Long Series – Inch

Long Series Type K432T

Knuckle Form
For use when high metal removal rates area required. Bright finish. Flute type: 25Â° spiral, oughing truncated. Shank diameter to js14.

Metric Tolerances
Diameter Â± 0.127mm

Read more
7mm HSS-COBALT L/S SC/SH SLOT DRILL

Sherwood 2 Flute Slot Drills Threaded Shank HSS-Co 5%, Long – Metric

Long Series Type S231T – Metric
Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
7mm HSS-COBALT SC/SH END MILL

Sherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Metric

Regular Series Type E411T
Used for profile milling and producing open slots. Bright finish. Flute type : 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

Read more
7mm HSS-COBALT SC/SH SLOT DRILL

Sherwood HSS-Co 5% Threaded Shank Slot Drills 2 Flute – Metric

Short Series – Metric
Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
7mm IMPACT SOCKET 1/4″ SQ DR

Kennedy Chrome Molybdenum Impact Sockets: 1/4″ Drive Metric, Standard Length, 6-Point

1/4â Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more