Archives: Products
Showing 13073–13088 of 23773 results
-
6″/150mm CHROMED DROP FORGED ADJUSTABLE SPANNERRead moreSenator Chromed Drop Forged Adjustable Wrenches
Tapered jaws for improved access into confined spaces. Smooth jaw adjustment. Graduated laser etched jaw for fast jaw setting. Manufactured from chromed drop forged steel.
-
6″/150mm DIGITAL ABS ELECTRONIC CALIPERRead moreOxford Precision ABS Digital Calipers
Precision ABSolute digital calipers have a thumb wheel for precise movement and a useful locking screw for checking repeat measurements. A measurement can be converted between inch/metric at the touch of a button. Non-output type.
ABSolute Measurement Function – The zero point once set is fixed until changed, even if the caliper is turned off (unless the battery is removed). Incremental mode can be achieved for repeated use of Go/No-Go measurement.
Resolution: 0.01mm/0.0005â.
Extra batteries available – Order Code EDI -904-4000K. -
6″/150mm DIGITAL ABS ELECTRONIC CALIPERRead moreKennedy ABSolute Digital Electronic Calipers
Modern design with a knurled thumb wheel for easy use when taking internal and external depth and step measurements. Dual readout giving instant inch/metric conversion at the touch of a button. Zero reset at any point, large clear display, error-free operation, fast response speed. Non-output type.
Resolution: 0.01mm/0.0005â.
Extra batteries available – Order Code EDI -904-4000K. -
6″/150mm DIGITAL CALIPERRead moreSenator Digital Calipers
Large display for clarity. Fast response speed. Zero reset. Dual readout mm/inch. Multi-use, inside, outside, depth and step measuring. Knurled thumb grip for precise movement.
-
6″/150mm PLAIN TYPE DEPTH GAUGERead moreKennedy Depth & Angle Gauges
Plain Type Depth Gauge
Designed for measuring flat based recesses. Consisting of a precision ground steel rule and body which are positioned at 90° to each other. The body has precision ground locating faces, with a knurled adjusting/securing nut.
Rule Length: 150mm (6â)Protractor Type Depth & Angle Gauge
Ground steel with graduations from 0° – 180° in both directions for fast and accurate measurements. When the rule is positioned to 90° on the protractor it then provides accurate measurements of depth.
Rule Length: 150mm (6â) -
6″/150mm PROTRACTOR TYPEDEPTH GAUGERp932.000Add to cartKennedy Depth & Angle Gauges
Plain Type Depth Gauge
Designed for measuring flat based recesses. Consisting of a precision ground steel rule and body which are positioned at 90° to each other. The body has precision ground locating faces, with a knurled adjusting/securing nut.
Rule Length: 150mm (6â)Protractor Type Depth & Angle Gauge
Ground steel with graduations from 0° – 180° in both directions for fast and accurate measurements. When the rule is positioned to 90° on the protractor it then provides accurate measurements of depth.
Rule Length: 150mm (6â) -
6″/150mm RATCHET SCREWDRIVERRead moreKennedy Ratchet Screwdriver
Flared blade. Three-position high performance ratchet. Suitable for rapid tightening or loosening of fastenings in a single action.
-
6″x1″x1.1/4″ A60 MEDIUM GRINDING WHEELRead moreGrinding Wheels
Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 11/4â bore, supplied with 1â, 7/8â, 3/4â, 5/8â and 1/2â bore nylon bushes.
All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other
accidental damage. Spare cases available below.Type 1 Plain
11/4â Bore -
6″x1″x1.1/4″ GC60JV GRINDING WHEELRead moreGrinding Wheels
Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 11/4â bore, supplied with 1â, 7/8â, 3/4â, 5/8â and 1/2â bore nylon bushes.
All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other
accidental damage. Spare cases available below.Type 1 Plain
11/4â Bore -
6″x1/16″x1″ HSS SLITTINGSAW 150TRead moreSherwood HSS Slitting Saws Fine/Coarse – Inch
High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.
-
6″x1/16″x1″ HSS SLITTINGSAW 44TRead moreSherwood HSS Slitting Saws Fine/Coarse – Inch
High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.
-
-
6″x1/2″ BRICK JOINTERRead moreKennedy Brick Jointer
Suitable for half round finishing of the joints between bricks. London pattern smooth wooden handle with integral tang.
-
6″x1/2″ DRAIN TEST BUNGRead moreKennedy Drain Test Bung
Used to pressure test or temporarily seal the end of an open pipe which is newly laid or decommissioned, preventing the ingress of water, gasses, rodents.
-
6″x1/2″,8″x3/4″,10″x1″ COLD CHISEL SETAdd to cartKennedy Cold Chisels – Chrome Vanadium: Flat Chisel Set
Flat Chisel Set
Used for cutting and chipping cold metals and brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals. -
6″x1/2″x1.1/4″ A46 MEDIUM GRINDING WHEELRead moreGrinding Wheels
Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 11/4â bore, supplied with 1â, 7/8â, 3/4â, 5/8â and 1/2â bore nylon bushes.
All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other
accidental damage. Spare cases available below.Type 1 Plain
11/4â Bore
