Archives: Products
Showing 13041–13056 of 23773 results
-
6″ PVC COATED SACK TIES (PK-1000)Read moreSack Ties
PVC coated stainless steel sack ties, for use on polypropelene woven sacks and polythene sacks. Made from 1.2mm thick wire. Each tie is looped at each end. Sold in bundles of 1000 ties.
These are easily applied with a sack tying tool sold separatley. -
6″ RUBBER PLUNGER – LOCKFASTRead moreKennedy Rubber Plunger
Builds up pressure of water to force obstruction clear. One piece rubber.
-
6″ RUBBER PLUNGER – UNIVERSALRead moreKennedy Rubber Plunger
Builds up pressure of water to force obstruction clear. One piece rubber.
-
6″ RULE-WALLETEDRead moreSenator Carpenterâs Rules
Extremely lightweight extrusion made from anodised aluminium, hardened and lacquered. Graduated mm/1/8â. Supplied in clear plastic wallets.
-
6″ SATIN-CHROME ADJUSTABLE WRENCHRead moreYamoto Satin Finish Adjustable Wrenches
Slimline tapered parallel jaws for improved access into confined spaces with smooth jaw adjustment and self-locking design prevents the jaws opening unintentionally even when under full load. Graduated laser etched jaws for fast repeatable jaw
setting and adjustment. Manufactured from âIâ beam section chrome vanadium steel for improved strength and rigidity, he jaws are heat treated for extended tool life. Corrosion-resistant satin finish. 22.5° offset head angle for positive torque control.Suitable for marine engineering, automotive, aerospace, agricultural maintenance and assembly applications.Conform to: ISO 6787-1982, ASME B.107.8M-1996, BS 6333-199405, DIN3117-1988, JIS B4604-1976.
Torque Ratings Conform to ISO 6787:1982. -
6″ SPARK RESISTANT DIAGONAL CUTTING PLIERS Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Long Nose Pliers
Long Nose Pliers
With side cutter, serrated jaws and safety grips.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
6″ SPARK RESISTANT LINESMAN PLIERS Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Linesman Pliers
Linesman Pliers
Serrated jaws for gripping nuts, bolts, studs etc. with side cutter and slip guard safety handles.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
6″ SPRING TYPE DIVIDERS-SOLID NUTRead moreKennedy Spring Dividers
Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.
-
6″ SPRING TYPE INSIDE CALIPER-SOLID NUTRead moreKennedy Internal & External Spring Calipers
Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points.
-
6″ SPRING TYPE OUTSIDE CALIPER-SOLID NUTRp227.000Read moreKennedy Internal & External Spring Calipers
Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points.
-
6″ STAINLESS STEEL GENERAL PURPOSE SCISSORSRead moreGeneral-Purpose Scissors
General-Purpose Shears
Traditional pattern stainless steel scissors with high polished finish. Asymmetrical handle design for improved user comfort and control. -
6″ STANDARD WOODEN FILE HANDLERead moreStandard Wooden File Handles
Suitable for traditionally tanged engineerâs files. With steel ferrule.
-
6″ STEEL BACK GENTS SAWRead moreKennedy Steel Back Gentâs Saws
Suitable for precise flush cutting. Sprung alloy steel blade with rigid steel back, polished rosewood handle and brass ferrule. Blade width: 60mm (2 1/4â).
-
6″ THREE SQUARE ENGINEERS SCRAPERRead moreKennedy Engineerâs Scrapers – Three Square
Three Square
Suitable for tool room and light engineering work. Used on small bearings and bushes and into restricted/tight angles.Wooden contoured handles with high grade steel blades, hardened and tempered with extremely keen cutting edges. Scrapers reduce high spots from a surface which has been previously machined or filed.
-
6″ TIN PLATE ROUND RIM FUNNELRead moreKennedy Tin-Plated Industrial Quality Funnels
Suitable for use with petrol, oil, water etc.
-
6″ WEIGHTY TEE HINGE (PR) GALVANISEDRead moreTee Hinges (Supplied as pairs)
Extra heavy duty: for very high load applications such as for farm field gates.
Material thickness up to 4mm.