Archives: Products
Showing 13121–13136 of 23773 results
-
6″x9″ WRITE-ON GRIPSEAL BAGSRead moreAvon? Gripseal Polythene Bags – Write On
Medium weight. With three write-on stripes. Pack of 1000.
-
6/8/10mm 3-IN-1 MINI PIPE BENDERRead moreKennedy 3-in-1 Mini Bender
For bending 6, 8 and 10mm diameter copper and aluminium tubes up to 90°. Calibrated for left hand, right hand or offset ends in copper, brass, aluminium or steel. With a graduated scale for partial bending. Ribbed die-cast aluminium construction for lightness and strength.
-
60 DRAWER SMALL PARTS STORAGE CABINETRead moreSenator Small Parts Storage Cabinets
Manufactured from heavy gauge steel, painted finish with transparent plastic drawers, allows contents to be viewed when the drawer is closed. The lip on the rear of the drawer allows it to be opened fully without falling out. The cabinets can be stacked or mounted to the wall to maximise use of storage space.
-
60 P20/P30 BRAZED TOOLRead moreKennedy Light Turning & Boring Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
60-DRAWER SMALL PARTS STORAGE CABINETRead moreKennedy Small Parts Storage Cabinets
Manufactured from heavy gauge steel, painted finish with impact resistant transparent polypropylene drawers, allowing contents to be viewed when the drawer is closed. The lip on the rear of the drawer allows it to be opened fully without falling out. The cabinets can be stacked or mounted to the wall to maximise use of storage space.
-
60.00mm HSS T/S DRILLRead moreSherwood HSS Taper Shank Drills, 5 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
60″x1.1/8″ HANDLE TO SUIT 18″/24″ BROOMSRead moreKennedy Broom/Mop Handles
Replacement wooden stales to suit brooms or mops.
-
600mm ADJ. FIELD GATE HINGE SET C/W FITTINGS GALV.Read moreHeavy Field Gate Hinge Set – Adjustable
Each set consists of top band, adjustable bottom band with full nuts hook to bolt and hook to drive. Complete with all fittings. Galvanised finish. Supplied individually. Boxed in 2’s.
-
600mm CHISEL & V-NOTCH WRECKING BARAdd to cartKennedy Wrecking & Pry Bars: Chisel and V-Notch Wrecking Bar
Chisel and V-Notch Wrecking Bar
For general dismantling and stripping applications, within a wide range of industries.
Manufactured from heat treated carbon steel. Ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). -
600mm CRANKED BANDS & HOOKS ON PLATE GALV. (PR)Read moreCRANKED BANDS & HOOKS ON PLATE
Supplied packed in pairs in a polythene bag and complete with all fixing screws and bolts. Supplied individually, boxed in 5’s.
-
600mm CURVED BLADE PLASTIC HANDLE PRY BARRead moreKennedy Plastic Handled Pry Bars – Straight Blade
Curved Blade
The curved blade provides greater leverage. Made from square section chrome vanadium with ground points. Impact resistant plastic handles offer a more comfortable and secure grip to make these pry bars user friendly. Handles are oil and acid resistant. Suitable for a wide range of general duty applications within the packing, automotive, maintenance and assembly industries. -
600mm GARAGE DOOR BOLT PRE-PACKED + FITTINGS GALV.Read moreGarage Door Drop Bolts
A very strong product with numerous applications. Made from galvanised steel. Supplied with fittings.
-
600mm H/D FIELD GATE HINGE SET 19mm PIN BLACK (PR)Read moreHeavy Field Gate Hinge Set
Each Set consists of top band, 125mm bottom band, 19mm diameter hook to bolt and 1x 19mm diameter hook to drive. Complete with all fittings. Black finish. Supplied individually. Boxed in 2’s.
-
600mm HEAVY DUTY PAINT & PLASTER MIXERRead moreKennedy Paint & Plaster Mixer
Used for mixing plaster, concrete, filler, epoxy resin, emulsion paint and wallpaper paste. The stirring end should be fully immersed before the shaft is turned.
Light Duty Shaft
8mm hex. Overall length: 400mm.Heavy Duty Shaft
12mm hex. Overall length: 600mm. -
600mm HVY F/GATE HINGE TOP BAND ONLY 19mmx3″ GALV.Read moreHeavy Field Gate Hinges – Top Bands Only
To fit a 75mm gate post and to suit a 19mm diameter pin. Galvanised finish. Supplied individually.
-
600mm LINE-UP PRY BARRead moreKennedy Heavy Duty Pry Bars – Line Type
Line Type
Angled blade provides greater leverage. Manufactured from forged carbon heat treated steel with ground points. These traditional designs are ideal for use by tradesman in any industrial environment.