Archives: Products
Showing 12993–13008 of 23773 results
-
6″ (150mm) SECOND CUT ENGINEERS FILE SET-8PCERp413.000Read moreEngineerâs Second Cut File Sets
Contents (1 of each): flat, hand, round, half-round three-square and square. Plus two file handles, supplied in PVC wallet. Manufactured to BS498 : 1990 & US Federal Standards.
-
6″ (150mm) SQUARE BASTARD ENGINEERS FILERp43.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Square
Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
6″ (150mm) SQUARE SECOND ENGINEERS FILERp43.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Square
Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
6″ (150mm) SQUARE SMOOTH ENGINEERS FILERp46.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Square
Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
6″ (150mm) TAPER SAW REGULAR SECOND CUT FILERp38.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Taper Saw
Taper Saw
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Taper Saw – Edges taper towards point. For filing and sharpening hand saws. Points are left uncut. Taper Saw Files are used for filing every type of handsaw which have 60° angle teeth. These files are single cut with edges that are set and cut for filing the gullet between the saw teeth. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
6″ (150mm) THREE SQUARE BASTARD ENGINEERS FILERp49.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
6″ (150mm) THREE SQUARE SECOND ENGINEERS FILERp52.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
6″ (150mm) THREE SQUARE SMOOTH ENGINEERS FILERp53.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
6″ (150mm) WARDING BASTARD ENGINEERS FILERp45.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
6″ (150mm) WARDING SECOND ENGINEERS FILERp48.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
6″ (150mm) WARDING SMOOTH ENGINEERS FILERp50.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
6″ 2-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Pullers – 2 Jaw
Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external
applications.
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what âspreadâ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed. -
6″ 2/3-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Puller – Industrial Kits
2 & 3 Jaw Reversible/Double-Ended/Adjustable
Manufactured from chrome vanadium steel. Each kit contains the components to assemble a 2 or 3 jaw external or internal puller. The legs can be set at two different height positions. -
6″ 3-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Pullers – 3-Jaw
3-Jaw Industrial Reversible Double-Ended Adjustable
Manufactured from drop forged chrome vanadium steel. -
6″ ADJUSTABLE STEEL SQUARERead moreKenendy Adjustable Steel Squares
Made from hardened steel and precision ground. Supplied with three fully adjustable blades. One plain, parallel blade for use as a conventional engineerâs square, 30° and 45°
bevel edged blade for checking angles, and a narrow blade graduated metric and imperial. -
6″ AUTO PIG BOLT GALVANISEDRead moreAuto Pig Lock Bolts
Autolock bolts with bottom guard to prevent fouling of the latch.