Archives: Products
Showing 11761–11776 of 23773 results
-
5/32″x 5/16″ 100DEG HSS-COBALT 3FL PILOTED C/SINKRp199.000Read moreHSS-Co 5% 3 Flute Piloted Countersinks
For the production of high precision concentrically centred countersinks in most metals where pilot holes have been pre-drilled. Shank diameter: 3/16″
Inclined Angles for Countersunk Socket Head Screws
Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: up to M20. Countersink Angle: 90°.
Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: over M20. Countersink Angle: 60°.
Thread Series: UNC/F. Standard: ANSI B 18.3. Thread Size: No.0 to 1″. Countersink Angle: 82°.
Thread Series: BSW/F. Standard: BS 2470. Thread Size: 1/8″ to 1″. Countersink Angle: 90°.
Thread Series: BA. Standard: BS 2470. Thread Size: 8BA to 0BA. Countersink Angle: 90°. -
5/32″x7.5″ T-HANDLED HEXAGON WRENCHRead moreKennedy Hexagon T-Handle Wrenches – Inch
Inch
Manufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. -
5/32×1.1/2″ SLOT S/DVR BIT 1/4″ HEX L/SRead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Flat
Flat
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
5/32×1″ SLOT S/DRIVER BIT 1/4″ HEX STDRead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Flat
Flat
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
5/64″ A/F HEXAGON BALL DRIVERRead moreKennedy Hexagon Ball Drivers – Inch
Inch
Can be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle. -
5/64″ A/F HEXAGON L-WRENCH BALL DRIVERRead moreKennedy Ball Driver L-Wrenches – Inch
Inch
Manufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30° work offset. Long arm end is ball drive and short arm end plain. Black oxidised finish. -
5/64″ A/F HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches: Inch – Standard Length
Inch – Standard Length
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
5/64″ A/F LONG ARM HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches, Long Arm – Inch
Inch – Long Arm
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
5/64″ HSS S/S BRIGHT JOBBER DRILLRp161.000Read moreHSS Jobber Drills Metric, Bright Finish – Inch
Series J100 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
5/64″ HSS S/S JOBBER DRILLRp120.000Read moreHSS Jobber Drills Steam Tempered – Inch
Series J100
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
5/64″ HSS S/S L/S DRILLRead moreHSS Straight Shank Long Series Drills
General purpose high speed steel long series drills are designed for deep hole drilling of most materials.
The drill has the same diameter on both the fluted section and the shank.
Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494. -
5/64″-1/4″ PRO-TORQ HEX BALL WRENCH SET ON CLIP(9)Read moreKennedy Pro-Torq Hexagon Ball Wrench Clip Sets
Conveniently folds up to a handy pocket size with penknife type storage. Moulded handle that gives excellent grip and user comfort.
Dimensions (W x D x H): 40 x 22 x 115mm.
8 Piece Set Contents: 1.5 – 8mm.
9 Piece Set Contents: 5/64â – 1/4â. -
5/64″-1/4″ PRO-TORQ HEX WRENCH SET ON CLIP (9-PCE)Read moreKennedy Pro-Torq Hex Wrench Sets on Clip
Supplied on robust plastic clips. Keeps all sizes together and readily available. Conveniently folds up to a handy pocket size with penknife type storage. Wrench size stamped on clip.
-
5/8 BSW X 1.1/2 SKT SET SCREW KNURLED (14.9)Read moreQualfast Socket Set Screws, Inch: BSW – Standard (Self-Colour) – Knurled Cup
High tensile alloy steel. Grade 14.9. BS 2470.
For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above 1/4â are generally counterbored to provide maximum clamping efficiency. -
5/8-11/16″ PROF FLARE NUT RING SPANNERRead moreKennedy Professional Flared Nut Ring Spanners – AF
AF: Conform with ANSI B107.6
Conform to: ASME B107.4. Made from chrome vanadium steel with a highly polished mirror finish. Made to American Federal Standards, giving higher torque therefore improved performance. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc. -
5/8-7/8″ (16-22mm) SIZE 3 NUT SPLITTERRead moreKennedy Nut Splitters
Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.