Archives: Products

Showing 11729–11744 of 23773 results

  • 5/16×3″ INCH PLAIN DOWELPIN

    Kennedy Quality Industrial Dowel Pins – Inch

    Hardened and precision ground. Conform with DIN 6325.
    Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.
    Tolerances:
    All sizes = +0.001” +0.003”.

    Read more
  • 5/16×3/4″ INCH PLAIN DOWEL PIN

    Kennedy Quality Industrial Dowel Pins – Inch

    Hardened and precision ground. Conform with DIN 6325.
    Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.
    Tolerances:
    All sizes = +0.001” +0.003”.

    Read more
  • 5/32″ A/F HEX SOCKET BIT1/4″ SQ DR

    Kennedy Bi-Hexagon Sockets, 1/4″ – Screwdriver Bits

    Screwdriver Bits
    Manufactured from high quality chrome vanadium, fully polished finish. Conform to DIN.
    Overall length: 37mm.
    Bit length: 19mm.

    Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.

    Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

    Read more
  • 5/32″ A/F HEXAGON BALL DRIVER

    Kennedy Hexagon Ball Drivers – Inch

    Inch
    Can be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle.

    Read more
  • 5/32″ A/F HEXAGON L-WRENCH BALL DRIVER

    Kennedy Ball Driver L-Wrenches – Inch

    Inch
    Manufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30° work offset. Long arm end is ball drive and short arm end plain. Black oxidised finish.

    Read more
  • 5/32″ A/F HEXAGON WRENCH

    Kennedy Hexagon Key L-Wrenches: Inch – Standard Length

    Inch – Standard Length
    Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

    Read more
  • 5/32″ A/F LONG ARM HEXAGON WRENCH

    Kennedy Hexagon Key L-Wrenches, Long Arm – Inch

    Inch – Long Arm
    Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

    Read more
  • 5/32″ CARBIDE S/S JOBBER DRILL

    Sherwood Solid Carbide Jobber Drills – Inch

    Series J102 – Inch
    General-purpose drills for drilling a wide variety of metallic and non-metallic materials. Point angle: 118. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce. Manufacturing Standard: BS 328, DIN 338.

    Read more
  • 5/32″ CARBIDE S/S JOBBER DRILL

    Kennedy Solid Carbide Jobber Drills – Inch

    Inch Sizes
    For drilling steels, cast steels, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy and light metal and abrasive plastic. Point angle 118. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce. Manufacturing Standard: DIN 338, BS 328.

    Read more
  • 5/32″ DIA COBALT DRILL FOR STAINLESS STEEL
    Rp47.000

    Kennedy HSS-Co 8% Heavy Duty Drills, Straight Shank – Inch

    Inch
    Heavy duty drill made of 8% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm2, very hard bronze, stainless steels as well as heat and acid resistant steels. Point angle: 135°. Helix angle: normal. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Supply unit. All diameters – 1 pce. Manufacturing Standard: BS 328, DIN 338B.

    Read more
  • 5/32″ DIE FOR KEN5607800K HOLE PUNCH

    Kennedy Power Hole Punch Kit

    This 14 piece punch kit is suitable for the precise & accurate punching of holes in Steel, Aluminium, Brass, Plastic and Leather.

    Manufactured from hardened steel delivering 1.2 tons of punch providing smooth piercing with minimum effort resulting in perfect clean cut holes.

    Adjustable depth gauge. Suitable for materials up to 14 gauge. Die and punch sizes: 2.38, 3.18, 3.97, 4.76, 5.56, 6.35, & 7.14mm. (3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″ & 9/32″)

    Read more
  • 5/32″ HEX SOCKET BIT 3/8″ SQ DR

    Kennedy Screwdriver Bit Sockets, 3/8″

    Often used in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is important in this type of environment. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free to ensure non sparking. All have ball retaining grooves. Conform to DIN standards.

    Read more
  • 5/32″ HSS S/S BRIGHT JOBBER DRILL
    Rp158.000

    HSS Jobber Drills Metric, Bright Finish – Inch

    Series J100 – Inch
    General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.

    Bright Finish
    Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials.

    Read more
  • 5/32″ HSS S/S JOBBER DRILL
    Rp158.000

    HSS Jobber Drills Steam Tempered – Inch

    Series J100
    Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.

    Black Finish (W-Finish)
    This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.

    Read more
  • 5/32″ HSS S/S L/S DRILL

    HSS Straight Shank Long Series Drills

    General purpose high speed steel long series drills are designed for deep hole drilling of most materials.
    The drill has the same diameter on both the fluted section and the shank.
    Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494.

    Read more
  • 5/32″ HSS S/S STUB DRILL

    HSS General Purpose Stub Drills – Imperial Sizes

    Series S100 – Inch
    General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328: Part 1: 1986/DIN 1897.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop