Archives: Products
Showing 11809–11824 of 23773 results
-
5/8″ HSS S/S JOBBER DRILLRead moreHSS Jobber Drills Steam Tempered – Inch
Series J100
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
5/8″ HSS S/S STUB DRILLRead moreHSS General Purpose Stub Drills – Imperial Sizes
Series S100 – Inch
General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BSâ328: Part 1: 1986/DIN 1897. -
5/8″ HSS T/S DRILLRp337.000Read moreSherwood General Purpose HSS Taper Shank Drills, 2 Morse Taper – Inch Sizes
Series T100 – Inch
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN. -
5/8″ HSS-COBALT SC/SH END MILLRead moreSherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Inch
Regular Series Type E411T
Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Inch Tolerances
Diameter: up to 1 1/2â. Tolerance: +0.0025, -0.0005.
Diameter: Over 1 1/2â. Tolerance: +0.0050, -0.0000. -
5/8″ NOZZLE POINTED STRAIGHT 3/4″ BORERead moreIndexa Modular Coolant Hose System – Nozzles
Nozzles
Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal – non-conductive and chemical resistant. Available with 1/4â, 1/2â and 3/4â bore. Hose is green, all other fittings are orange. Threaded fittings are fully compatible with BSPT. -
5/8″ OCTAGONAL PLASTIC PROTECTOR SLEEVERead moreKennedy Protector Sleeves
Contoured high impact resistant plastic grips redirects the force of miss-hits safely away from your hands preventing injury. Suitable for use with octagonal cold chisels.
-
5/8″ PROFESSIONAL BEVEL EDGE WOOD CHISELRead moreKennedy Bevel Edge Wood Chisels – Professional
Professional
âClassicâ pattern. For professional carpenters. Hammer-blow resistant handles. For craftsmen and joiners. Designed to give a life-time of high performance. Chrome vanadium alloy blades, hardened, tempered, ground and polished. âCABâ (Cellulose Acetate Butyrate handles). -
5/8″ SOLID CENTRE AUGER BITRead moreKennedy Auger Bits
American pattern with solid single twist. Spur point and hexagon shank for use with hand and power tools.
-
5/8″ SQ x 4″ COBALT TOOLBITRp769.000Read moreHSS Cobalt Toolbits
5% Cobalt Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
5/8″ SQ x 4″ HSS TOOLBITRp480.000Read moreHSS Toolbits
HSS Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
5/8″ SQ x 6″ COBALT TOOLBITRp1.205.000Read more
HSS Cobalt Toolbits
5% Cobalt Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
5/8″ SQ x 6″ HSS TOOLBITRp724.000Read more
HSS Toolbits
HSS Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
5/8″ SQUARE x 12″ KEY STEELRead moreKennedy Industrial Key Steel – Square: Inch
Square â Inch
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request. -
5/8″ UNC x 3FT MILD STEEL STUDDINGRead moreHigh Quality Screwed Studding – Mild Steel, Grade 4.6 Self-Colour: UNC
Mild Steel – Grade 4.6 Self-Colour: UNC
Colour-coded at each end of length for easy identification as shown. -
5/8″ UNC x 3FT MILD STEEL STUDDING ZINC PLATEDRead more
High Quality Screwed Studding – Mild Steel, Grade 4.6 Zinc-Plated: UNC
Mild Steel, Grade 4.6 Zinc-Plated: UNC
Colour-coded at each end of length for easy identification as shown. -
5/8″ WHIT CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Whitworth
Whitworth
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982.