Archives: Products

Showing 10849–10864 of 23773 results

  • 48mm CARBIDE TIPPED HOLESAW

    Carbide Tipped Holesaws

    Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.

    Read more
  • 48mm DIA. (1.7/8″) BI-METAL HOLESAW
    Rp192.000

    Constant Pitch Bi-Metal HSS Holesaws

    Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2”) cutting depth.

    Read more
  • 48mm DIA. (1.7/8″) BI-METAL V/P HOLESAW
    Rp192.000

    Variable Pitch Bi-Metal HSS Holesaws

    For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
    28.5mm (11/8”) cutting depth.

    Read more
  • 48mm IMPACT SOCKET 1-1/2″ DR

    Chrome Molybdenum Impact Sockets: 1 1/2″ Drive Metric Size, Standard Length, 6-Point

    1 1/2″ Drive Metric Size, Standard Length, 6-Point
    Conform to: SAE, USA Federal Standard GGG-W-660A.

    Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

    Read more
  • 48mm IMPACT SOCKET 1″ SQDR

    Kennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Standard Length, 6-Point

    Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

    Read more
  • 48mm LONG MULTI-TOOTH CUTTER

    M2 Multi-Tooth Milling Cutters

    Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
    Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.

    Long Series
    Shank diameter: 19mm/3/4”.
    Depth of cut: 50mm.
    Bore: 6mm.
    Overall length: 85mm.

    Read more
  • 48mmx66M HIGH GRADE VINYL SEALING TAPE

    High Grade Vinyl Sealing Tape

    An economic way to seal your cartons. Available in 35 and 65-micron for strength and toughness, the waterproof low-static vinyl film is impact resistant and has excellent adhesive strength.
    Standard: (35 mic).
    Heavy duty: (65 mic). 76mm core.
    Roll Size: 50mm x 66m.

    Read more
  • 48mmx66M LOW NOISE POLYPROPYLENE TAPE BUFF

    ‘Low Noise’ Polypropylene Packing Tape

    Polypropylene tape with slow and almost silent release characteristics (quite similar to those of vinyl). The most noticeable difference being that unlike vinyl, this tape is very difficult to tear using just fingertips. For best results use in a dispenser fitted with a brake.
    Roll Size: 48mm x 66m.

    Read more
  • 48mmx66M POLYPROPYLENE SEALING TAPE BLUE

    Coloured Polypropylene Tape

    Standard tape – competitively priced, widely used in all sorts of packing applications. With rapid release from the roll, best applied with a dispenser fitted with a brake. Size: 50mm x 66m. Available in white, red, blue, green and yellow.

    Read more
  • 48mmx66M POLYPROPYLENE SEALING TAPE CLEAR

    Polypropylene Carton Tape

    Standard tape – competitively priced, widely used in all sorts of packing applications. With rapid release from the roll, best applied with a dispenser fitted with a brake.
    Roll Size: 50mm x 66m.

    Read more
  • 48mmx66M POLYPROPYLENE SEALING TAPE RED

    Coloured Polypropylene Tape

    Standard tape – competitively priced, widely used in all sorts of packing applications. With rapid release from the roll, best applied with a dispenser fitted with a brake. Size: 50mm x 66m. Available in white, red, blue, green and yellow.

    Read more
  • 48mmx66M POLYPROPYLENE SEALING TAPE WHITE

    Coloured Polypropylene Tape

    Standard tape – competitively priced, widely used in all sorts of packing applications. With rapid release from the roll, best applied with a dispenser fitted with a brake. Size: 50mm x 66m. Available in white, red, blue, green and yellow.

    Read more
  • 48mmx66M POLYPROPYLENE SEALING TAPE YELLOW

    Coloured Polypropylene Tape

    Standard tape – competitively priced, widely used in all sorts of packing applications. With rapid release from the roll, best applied with a dispenser fitted with a brake. Size: 50mm x 66m. Available in white, red, blue, green and yellow.

    Read more
  • 49.00mm HSS T/S DRILL

    Sherwood HSS Taper Shank Drills, 4 Morse Taper – Metric

    Series T100
    General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345.

    Read more
  • 49/64″ HSS T/S DRILL

    Sherwood General Purpose HSS Taper Shank Drills, 2 Morse Taper – Inch Sizes

    Series T100 – Inch
    Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN.

    Read more
  • 4B HSS BELL TYPE CENTRE DRILL
    Rp312.000

    Sherwood Bell-Type Centre Drills HSS – Inch

    Inch Series
    Manufactured to BS328;Part 2:1986, DIN333, ISO2540.
    The “B” type Centerdrill is a dual-purpose drill which includes a 60º angle for burnishing and a 120º shoulder for chamfering. This drill is used for the heaviest of work applications.
    For all dimensional specifications please refer to our catalogue.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop