Category
- Abrasives
- Adhesives & Sealants
- Automotive
- Bearings & Transmissions
- Cabinets & Racking
- Calipers & Gauges
- Catering Equipment & Supplies
- Cleaning & Hygiene
- Collets & Toolposts
- Computers & Accessories
- Counterboring & Spot Facing
- Cutting Tools
- Bandsaws & Hacksaws
- Countersinking
- Deburring
- Hole Making
- Milling
- Ball Nose
- Carbide B/N End Mills – Long Series
- Carbide B/N End Mills – Regular Series
- Carbide B/N End Mills – Short Series
- Carbide B/N Slot Drills – Long Series
- Carbide B/N Slot Drills – Regular Series
- HSS B/N Slot Drills – Long Series
- HSS B/N Slot Drills – Short Series
- HSS-Co. B/N Slot Drills – Long Series
- HSS-Co. B/N Slot Drills – Short Series
- Bore Milling
- End Mills
- Carbide Double Ended End Mills – Regular Series
- Carbide End Mills – Long Series
- Carbide End Mills – Regular Series
- Carbide End Mills – Short Series
- HSS End Mills – Long Series
- HSS End Mills – Short Series
- HSS-Co. End Mills – Long Series
- HSS-Co. End Mills – Regular Series
- HSS-E PM End Mills – Regular Series
- Indexable Bodies
- Key & Slot Cutters
- Milling Inserts
- Roughing/Ripper Cutters
- Slot Drills
- Carbide Slot Drills – Double Ended
- Carbide Slot Drills – Long Series
- Carbide Slot Drills – Regular Series
- Carbide Slot Drills – Short Series
- HSS Slot Drills – Long Series
- HSS Slot Drills – Short Series
- HSS-Co. Slot Drills – Long Series
- HSS-Co. Slot Drills – Regular Series
- HSS-Co. Slot Drills – Short Series
- Slot Drill Cutter Sets
- Special Geometry Cutters
- Throwaway Cutters
- Ball Nose
- Part off & Grooving
- Reamers
- Reference/Data Books
- Threading
- Die nuts
- Dies
- Indexable
- Tapping Hand
- BA ISO529 HSS-GT Taps
- BSF ISO529 HSS-GT Taps
- BSPF ISO529 HSS-GT Taps
- BSPT ISO529 HSS-GT Taps
- BSW ISO529 HSS-GT Taps
- Combination Drill/Taps
- Left Hand ISO529 HSS-GT Taps
- Metric Coarse ISO529 HSS-GT Taps
- Metric Fine ISO529 HSS-GT Taps
- Metric ISO529 HSS-GT Threading Sets
- NPSF ISO529 HSS-GT Taps
- NPT ISO529 HSS-GT Taps
- NPTF ISO529 HSS-GT Taps
- Tap Wrenches
- UNC ISO529 HSS-GT Taps
- UNF ISO529 HSS-GT Taps
- Tapping Production
- Thread Chasers
- Turning
- Display Material
- Fasteners
- Fluid & Water Control
- Fluid Power
- Furniture
- Hand Tools
- Building & Construction
- Carpenters & Joiners
- Auger; Forstner & Flat Bits
- Bradawls; Gimlets & Tacklifters
- Chalk Lines
- Hand Drills & Braces
- Hole Cutters
- Marking & Cutting Gauges
- Mitre Blocks & Bench Hooks
- Pincers
- Planes
- Saws – Coping; Fret & Flexisaws
- Saws – Gents; Dovetail & Tenon
- Saws – Hand & Mitre
- Squares; Rules & Bevels
- Surface Forming Tools
- Wood Chisels
- Wood Turning & Carving Tools
- Clamps
- Cutting & Sawing
- Cycle Tools
- Decorators
- Electrical
- Engineers Tools
- Gardeners & Contractors
- Keys & Drivers
- Measuring
- Non Sparking Tools
- Pliers & Grips
- Plumbing & Pipe Tools
- Riveters
- Screwdriver Bits
- Screwdrivers
- Screwdrivers – Cabinet Handle
- Screwdrivers – Electronics & Mini
- Screwdrivers – Fluted Handle
- Screwdrivers – Hi-Grip/Mechanics Style Handle
- Screwdrivers – Insulated Handle
- Screwdrivers – Offset/Double Ended
- Screwdrivers – Precision/Jewellers
- Screwdrivers – Protorq/Magnum Style Handle
- Screwdrivers – Spiral Ratchet/Yankee
- Sheet Metal Working
- Sockets (Hand)
- Sockets (Impact)
- Spanners & Wrenches
- Stencils & Engraving
- Striking Tools
- Tool Kits & Multi Tools
- Torque Tools
- Vices
- Lubricants & Chemicals
- Anti Seize Lubricants
- Chain; Drive & Rope Lubricants
- Corrosion Preventatives & Welders Anti-Spatter
- Food Industry Lubricants & Greases
- Greases
- Grinding Fluids
- Hot Dip Coatings
- Industrial Cleaners & Solvents
- Leak Detectors; Flawfinders & Freezer Sprays
- Lubricating and Penetrating Oils
- Marker Paints & Pens
- Metal Cutting Coolants
- Mould Release Agents
- Paints & Primers
- Tapping & Drilling Lubricants
- Water Displacing & Maintenance Oils
- Materials & Maintenance
- Measuring & Test Equipment
- Co-Ordinate Measuring Machines
- Electrical Measuring & Testing Equipment
- Environment Gauges
- Inspection Workholding
- Mechanical Gauges
- Non-Mechanical Gauges
- Optical Equipment
- SPC & Digital Readout Equipment
- Spring Calipers & Spring Dividers
- Surface/Hardness Testers
- Test Gauges & Accessories
- Weigh Scales
- Office Supplies & Stationery
- Packaging
- Pads & Accounts
- Personal Protection
- Clothing & Workwear
- Eye Protection
- Footwear
- Hand Protection
- Gloves – Cold Resistant
- Gloves – Cotton
- Gloves – Cowhide
- Gloves – Disposable
- Gloves – Extra Grip
- Gloves – Goatskin
- Gloves – Latex
- Gloves – Leather
- Gloves – Mixed Fibre
- Gloves – Nitrile
- Gloves – Polkadot
- Gloves – Polyurethane
- Gloves – PVC
- Gloves – Rigger
- Gloves – Stockinette
- Gloves – Terry Towelling
- Gloves – Vinyl
- Gloves – Welders Gauntlets
- Head & Face Protection
- Hearing Protection
- Knee & Elbow Pads
- Personal Protection Kits
- Respiratory Protection
- Piston & Valve Tools
- Power Tools
- Site Safety
- Spindle Nose & Workholding
- Steps & Access Equipment
- Storage & Handling
Archives: Products
Showing 10817–10832 of 23773 results
-
46mm SOCKET 3/4″ SQ DRRead more
Kennedy Bi-Hexagon Sockets, 3/4″ – Metric
Metric
A heavy duty range designed to cope with the demands of industrial agricultural machinery and heavy plant, static or mobile. All Kennedy Professional sockets have a unique double knurl to give a high grip essential for a quick tool change when hands are greasy. Manufactured from chrome vanadium and fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location. Registered Design No. 2053516UK. -
46mm SPARK RESISTANT O/END SLOGGING WRENCH Al-BrRead more
Kennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Open End Slogging Wrench
Open End Slogging Wrench
With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.
-
46mm SPARK RESISTANT R/END SLOGGING WRENCH Al-BrRead more
Aluminium-Bronze Spark-Resistant Safety Tools: Ring End Slogging Wrench
Ring End Slogging Wrench
With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
46mm SPARK RESISTANT SOCKET 3/4″ SQ. DRIVE Al-BrRead more
Kennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Sockets
Sockets
12 point bi-hexagon.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
46mm WORKSHOP OPEN END SPANNERRead more
Kennedy Open Jaw Spanners – Single-Ended
Single-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 894. -
46mm x 50mm CH/VAN RING SPANNERRead more
Kennedy Double Ended Ring Spanners – Metric
Metric
Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth. -
46mm x 50mm DROP FORGED O/END SPANNERRead more
Kennedy Industrial Open Ended Spanners – Metric
Metric
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth. -
46mmx50mm WORKSHOP OPEN END SPANNERRead more
Open Jaw Spanners – Double-Ended
Double-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. -
46PC MASTER MM SOCKET SET 1/4″ SQ DRRead more
Kennedy Socket Sets 1/4″ – TSD46M – 46 Piece Metric Set
Standard & Deep Sockets with Screwdriver Bits
Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.
Deep Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.
Screwdriver Bits: Slotted 4, 5.5, 7mm. Crosspoint No.1, No.2, No.3. Hex 3, 4, 5, 6, 8mm.
Accessories: sliding T-handle, ratchet handle, extension bar 50 and 150mm, wobble extension 100 and 250mm, universal joint, jointed swivel handle 150mm, spinner handle. -
46PC MM/AF SOCKET SET 1/4″ SQ DRRead more
Kennedy Socket Sets 1/4″ – TS46MA – 46 Piece Metric & Inch
Standard Sockets with Screwdriver Bits
Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.
AF Sockets: 3/16â, 7/32â, 1/4â, 5/16â, 11/32â, 3/8â, 7/16â, 1/2â.
Screwdriver Bits: Slotted 4, 5.5mm. Crosspoint No.2, No.3.
Hex 3, 4, 5, 6, 8mm. Hex 1/8â, 5/32â, 3/16â, 7/32â, 1/4â, 5/16â AF.
Accessories: sliding T-handle, ratchet handle, wobble extension 50 and 150mm, extension bars 100 and 250mm, universal joint, jointed swivel handle 150mm, flexible extension 150mm, spinner handle. -
46×10.7mm FERRITE SHALLOW HOLD MAGNETRead more
Kennedy Ferrite Shallow Pot Magnets
Manufactured from ceramic ferrite material set in a mild steel shell. Suitable for holding machine tool accessories with M6 threads or building into jigs. Supplied with J bolt for easy release.
-
46x25mm LAMINATED BRASS 4No COMBINATION PADLOCKRead more
Matlock⢠Padlocks
Matlock⢠security a comprehensive range of door locks and padlocks, suitable for securing bikes, sheds, garages, business premises etc. All Matlock? security products are backed by a quality assurance guarantee.
-
46x25mm LAMINATED STEEL 4No COMBINATION PADLOCKRead more
Matlock⢠Padlocks
Matlock⢠security a comprehensive range of door locks and padlocks, suitable for securing bikes, sheds, garages, business premises etc. All Matlock? security products are backed by a quality assurance guarantee.
-
47.00mm HSS T/S DRILLRead more
Sherwood HSS Taper Shank Drills, 4 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
47/64″ HSS T/S DRILLRead more
Sherwood General Purpose HSS Taper Shank Drills, 2 Morse Taper – Inch Sizes
Series T100 – Inch
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN. -
470mm & 582mm YELLOW METAL TOOLBOX SET 2-PCERead more
Heavy-Duty Site Tool Boxes
Powder coated. Soft grip carrying handle and lightweight design. The black plastic overriders add to the overall ruggedness helping to prevent damage to the box or items around it. The lid has ‘V’ section to allow measuring and cutting short lengths of pipe. There is a tote tray for smaller items. Fitted with heavy duty metal latches designed to stay closed even when in transit.